Message-ID: <239f0f5692d9c00f3c9e0d5d58cd77d2e5ba5eb4.camel@kernel.org>
Date:   Wed, 01 Jun 2022 05:01:19 +0300
From:   Jarkko Sakkinen <jarkko@...nel.org>
To:     Reinette Chatre <reinette.chatre@...el.com>,
        dave.hansen@...ux.intel.com, tglx@...utronix.de, bp@...en8.de,
        luto@...nel.org, mingo@...hat.com, linux-sgx@...r.kernel.org,
        x86@...nel.org, shuah@...nel.org, linux-kselftest@...r.kernel.org
Cc:     seanjc@...gle.com, kai.huang@...el.com, cathy.zhang@...el.com,
        cedric.xing@...el.com, haitao.huang@...el.com,
        mark.shanahan@...el.com, vijay.dhanraj@...el.com, hpa@...or.com,
        linux-kernel@...r.kernel.org, nathaniel@...fian.com
Subject: Re: [PATCH V5 00/31] x86/sgx and selftests/sgx: Support SGX2

On Tue, 2022-05-10 at 11:08 -0700, Reinette Chatre wrote:
> V4: https://lore.kernel.org/lkml/cover.1649878359.git.reinette.chatre@intel.com/
> 
> Changes since V4 that directly impact user space:
> - SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl()'s struct was renamed
>   from struct sgx_enclave_modify_type to
>   struct sgx_enclave_modify_types. (Jarkko)
> 
> Details about changes since V4 that do not directly impact user space:
> - Related function names were changed to match with the struct name
>   change:
>   sgx_ioc_enclave_modify_type() -> sgx_ioc_enclave_modify_types()
>   sgx_enclave_modify_type() -> sgx_enclave_modify_types()
> - Revert a SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS parameter check that
>   requires read permission. The hardware does support restricting
>   enclave page permission to zero permissions. Replace with
>   permission check to ensure read permission is set when write permission
>   is set. This is verified early to prevent a later fault of the
>   instruction. (Vijay).
> - Do not attempt direct reclaim if no EPC pages available during page
>   fault. mmap_lock is already held in page fault handler so attempting
>   to take it again while running sgx_reclaim_pages() has risk of
>   deadlock. This was discovered by lockdep during stress testing.
> - Pick up Reviewed-by and Tested-by tags from Jarkko.
> - Pick up Tested-by tags from Haitao after testing with Intel SGX SDK/PSW.
> - Pick up Tested-by tags from Vijay after testing with Gramine.
> 
> V3: https://lore.kernel.org/lkml/cover.1648847675.git.reinette.chatre@intel.com/
> 
> Changes since V3 that directly impact user space:
> - SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS ioctl()'s struct
>   sgx_enclave_restrict_permissions no longer provides entire secinfo,
>   just the new permissions in new "permissions" struct member. (Jarkko)
> - Rename SGX_IOC_ENCLAVE_MODIFY_TYPE ioctl() to
>   SGX_IOC_ENCLAVE_MODIFY_TYPES. (Jarkko)
> - SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl()'s struct sgx_enclave_modify_type
>   no longer provides entire secinfo, just the new page type in new
>   "page_type" struct member. (Jarkko)
> 
> Details about changes since V3 that do not directly impact user space:
> - Add new patch to enable VA pages to be added without invoking reclaimer
>   directly if no EPC pages are available, failing instead. This enables
>   VA pages to be added with enclave's mutex held. Fixes an issue
>   encountered by Haitao. More details in new patch "x86/sgx: Support VA page
>   allocation without reclaiming".
> - While refactoring, change existing code to consistently use
>   IS_ALIGNED(). (Jarkko)
> - Many patches received a tag from Jarkko.
> - Many smaller changes, please refer to individual patches.
> 
> V2: https://lore.kernel.org/lkml/cover.1644274683.git.reinette.chatre@intel.com/
> 
> Changes since V2 that directly impact user space:
> - Maximum allowed permissions of dynamically added pages is RWX,
>   previously limited to RW. (Jarkko)
>   Dynamically added pages are initially created with architecturally
>   limited EPCM permissions of RW. mmap() and mprotect() of these pages
>   with RWX permissions would no longer be blocked by SGX driver. PROT_EXEC
>   on dynamically added pages will be possible after running ENCLU[EMODPE]
>   from within the enclave with appropriate VMA permissions.
> 
> - The kernel no longer attempts to track the EPCM runtime permissions. (Jarkko)
>   Consequences are:
>   - Kernel does not modify PTEs to follow EPCM permissions. User space
>     will receive #PF with SGX error code in cases where the V2
>     implementation would have resulted in regular (non-SGX) page fault
>     error code.
>   - SGX_IOC_ENCLAVE_RELAX_PERMISSIONS is removed. This ioctl() was used
>     to clear PTEs after permissions were modified from within the enclave
>     and ensure correct PTEs are installed. Since PTEs no longer track
>     EPCM permissions the changes in EPCM permissions would not impact PTEs.
>     As long as new permissions are within the maximum vetted permissions
>     (vm_max_prot_bits) only ENCLU[EMODPE] from within enclave is needed,
>     as accompanied by appropriate VMA permissions.
> 
> - struct sgx_enclave_restrict_perm renamed to
>      sgx_enclave_restrict_permissions (Jarkko)
> 
> - struct sgx_enclave_modt renamed to struct sgx_enclave_modify_type
>   to be consistent with the verbose naming of other SGX uapi structs.
> 
> Details about changes since V2 that do not directly impact user space:
> - Kernel no longer tracks the runtime EPCM permissions with the aim of
>   installing accurate PTEs. (Jarkko)
>   - In support of this change the following patches were removed:
>     Documentation/x86: Document SGX permission details
>     x86/sgx: Support VMA permissions more relaxed than enclave permissions
>     x86/sgx: Add pfn_mkwrite() handler for present PTEs
>     x86/sgx: Add sgx_encl_page->vm_run_prot_bits for dynamic permission changes
>     x86/sgx: Support relaxing of enclave page permissions
>   - No more handling of scenarios where VMA permissions may be more
>     relaxed than what the EPCM allows. Enclaves are not prevented
>     from accessing such pages and the EPCM permissions are entrusted
>     to control access as supported by the SGX error code in page faults.
>   - No more explicit setting of protection bits in page fault handler.
>     Protection bits are inherited from VMA similar to SGX1 support.
> 
> - Selftest patches are moved to the end of the series. (Jarkko)
> 
> - New patch contributed by Jarkko to avoid duplicated code:
>    x86/sgx: Export sgx_encl_page_alloc()
> 
> - New patch separating changes from existing patch. (Jarkko)
>    x86/sgx: Export sgx_encl_{grow,shrink}()
> 
> - New patch to keep one required benefit from the (now removed) kernel
>   EPCM permission tracking:
>    x86/sgx: Support loading enclave page without VMA permissions check
> 
> - Updated cover letter to reflect architecture changes.
> 
> - Many smaller changes, please refer to individual patches.
> 
> V1: https://lore.kernel.org/linux-sgx/cover.1638381245.git.reinette.chatre@intel.com/
> 
> Changes since V1 that directly impact user space:
> - SGX2 permission changes changed from a single ioctl() named
>   SGX_IOC_PAGE_MODP to two new ioctl()s:
>   SGX_IOC_ENCLAVE_RELAX_PERMISSIONS and
>   SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS, supported by two different
>   parameter structures (SGX_IOC_ENCLAVE_RELAX_PERMISSIONS does
>   not support a result output parameter) (Jarkko).
> 
>   User space flow impact: After user space runs ENCLU[EMODPE] it
>   needs to call SGX_IOC_ENCLAVE_RELAX_PERMISSIONS to have PTEs
>   updated. Previously running SGX_IOC_PAGE_MODP in this scenario
>   resulted in EPCM.PR being set but calling
>   SGX_IOC_ENCLAVE_RELAX_PERMISSIONS will not result in EPCM.PR
>   being set anymore and thus no need for an additional
>   ENCLU[EACCEPT].
> 
> - SGX_IOC_ENCLAVE_RELAX_PERMISSIONS and
>   SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS
>   obtain new permissions from secinfo as parameter instead of
>   the permissions directly (Jarkko).
> 
> - ioctl() supporting SGX2 page type change is renamed from
>   SGX_IOC_PAGE_MODT to SGX_IOC_ENCLAVE_MODIFY_TYPE (Jarkko).
> 
> - SGX_IOC_ENCLAVE_MODIFY_TYPE obtains new page type from secinfo
>   as parameter instead of the page type directly (Jarkko).
> 
> - ioctl() supporting SGX2 page removal is renamed from
>   SGX_IOC_PAGE_REMOVE to SGX_IOC_ENCLAVE_REMOVE_PAGES (Jarkko).
> 
> - All ioctl() parameter structures have been renamed as a result of the
>   ioctl() renaming:
>   SGX_IOC_ENCLAVE_RELAX_PERMISSIONS => struct sgx_enclave_relax_perm
>   SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS => struct sgx_enclave_restrict_perm
>   SGX_IOC_ENCLAVE_MODIFY_TYPE => struct sgx_enclave_modt
>   SGX_IOC_ENCLAVE_REMOVE_PAGES => struct sgx_enclave_remove_pages
> 
> Changes since V1 that do not directly impact user space:
> - Number of patches in series increased from 25 to 32 primarily because
>   of splitting the original submission:
>   - Wrappers for the new SGX2 functions are introduced in three separate
>     patches replacing the original "x86/sgx: Add wrappers for SGX2
>     functions"
>     (Jarkko).
>   - Moving and renaming sgx_encl_ewb_cpumask() is done with two patches
>     replacing the original "x86/sgx: Use more generic name for enclave
>     cpumask function" (Jarkko).
>   - Support for SGX2 EPCM permission changes is split into two ioctls(),
>     one for relaxing and one for restricting permissions, each introduced
>     by a new patch replacing the original "x86/sgx: Support enclave page
>     permission changes" (Jarkko).
>   - Extracted code used by existing ioctls() for usage by new ioctl()s
>     into a new utility in new patch "x86/sgx: Create utility to validate
>     user provided offset and length" (Dave did not specifically ask for
>     this but it addresses his review feedback).
>   - Two new Documentation patches to support the SGX2 work
>     ("Documentation/x86: Introduce enclave runtime management") and
>     a dedicated section on the enclave permission management
>     ("Documentation/x86: Document SGX permission details") (Andy).
> - Most patches were reworked to improve the language by:
>   * aiming to refer to exact item instead of English rephrasing (Jarkko).
>   * use ioctl() instead of ioctl throughout (Dave).
>   * Use "relaxed" instead of "exceed" when referring to permissions
>     (Dave).
> - Improved documentation with several additions to
>   Documentation/x86/sgx.rst.
> - Many smaller changes, please refer to individual patches.
> 
> Hi Everybody,
> 
> The current Linux kernel support for SGX includes support for SGX1 that
> requires that an enclave be created with properties that accommodate all
> usages over its (the enclave's) lifetime. This includes properties such
> as permissions of enclave pages, the number of enclave pages, and the
> number of threads supported by the enclave.
> 
> Consequences of this requirement to have the enclave be created to
> accommodate all usages include:
> * pages needing to support relocated code are required to have RWX
>   permissions for their entire lifetime,
> * an enclave needs to be created with the maximum stack and heap
>   projected to be needed during the enclave's entire lifetime which
>   can be longer than the processes running within it,
> * an enclave needs to be created with support for the maximum number
>   of threads projected to run in the enclave.
> 
> Since SGX1 a few more functions were introduced, collectively called
> SGX2, that support modifications to an initialized enclave. Hardware
> supporting these functions are already available as listed on
> https://github.com/ayeks/SGX-hardware
> 
> This series adds support for SGX2, also referred to as Enclave Dynamic
> Memory Management (EDMM). This includes:
> 
> * Support modifying EPCM permissions of regular enclave pages belonging
>   to an initialized enclave. Only permission restriction is supported
>   via a new ioctl() SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS. Relaxing of
>   EPCM permissions can only be done from within the enclave with the
>   SGX instruction ENCLU[EMODPE].
> 
> * Support dynamic addition of regular enclave pages to an initialized
>   enclave. At creation new pages are architecturally limited to RW EPCM
>   permissions but will be accessible with PROT_EXEC after the enclave
>   runs ENCLU[EMODPE] to relax EPCM permissions to RWX.
>   Pages are dynamically added to an initialized enclave from the SGX
>   page fault handler.
> 
> * Support expanding an initialized enclave to accommodate more threads.
>   More threads can be accommodated by an enclave with the addition of
>   Thread Control Structure (TCS) pages that is done by changing the
>   type of regular enclave pages to TCS pages using a new ioctl()
>   SGX_IOC_ENCLAVE_MODIFY_TYPES.
> 
> * Support removing regular and TCS pages from an initialized enclave.
>   Removing pages is accomplished in two stages as supported by two new
>   ioctl()s SGX_IOC_ENCLAVE_MODIFY_TYPES (same ioctl() as mentioned in
>   previous bullet) and SGX_IOC_ENCLAVE_REMOVE_PAGES.
> 
> * Tests covering all the new flows, some edge cases, and one
>   comprehensive stress scenario.
> 
> No additional work is needed to support SGX2 in a virtualized
> environment. All tests included in this series passed when run from
> a guest as tested with the recent QEMU release based on 6.2.0
> that supports SGX.
> 
> Patches 1 through 14 prepare the existing code for SGX2 support by
> introducing the SGX2 functions, refactoring code, and tracking enclave
> page types.
> 
> Patches 15 through 21 enable the SGX2 features and include a
> Documentation patch.
> 
> Patches 22 through 31 test several scenarios of all the enabled
> SGX2 features.
> 
> This series is based on v5.18-rc5 with recently submitted SGX shmem
> fixes applied:
> https://lore.kernel.org/linux-sgx/cover.1652131695.git.reinette.chatre@intel.com/
> A repo with both series applied is available:
> repo: https://github.com/rchatre/linux.git
> branch: sgx/sgx2_submitted_v5_plus_rwx
> 
> This SGX2 series also applies directly to v5.18-rc5 if done with a 3-way merge
> since it and the shmem fixes both make changes to arch/x86/kernel/cpu/sgx/encl.h
> but do not have direct conflicts.
> 
> Your feedback will be greatly appreciated.
> 
> Regards,
> 
> Reinette
> 
> Jarkko Sakkinen (1):
>   x86/sgx: Export sgx_encl_page_alloc()
> 
> Reinette Chatre (30):
>   x86/sgx: Add short descriptions to ENCLS wrappers
>   x86/sgx: Add wrapper for SGX2 EMODPR function
>   x86/sgx: Add wrapper for SGX2 EMODT function
>   x86/sgx: Add wrapper for SGX2 EAUG function
>   x86/sgx: Support loading enclave page without VMA permissions check
>   x86/sgx: Export sgx_encl_ewb_cpumask()
>   x86/sgx: Rename sgx_encl_ewb_cpumask() as sgx_encl_cpumask()
>   x86/sgx: Move PTE zap code to new sgx_zap_enclave_ptes()
>   x86/sgx: Make sgx_ipi_cb() available internally
>   x86/sgx: Create utility to validate user provided offset and length
>   x86/sgx: Keep record of SGX page type
>   x86/sgx: Export sgx_encl_{grow,shrink}()
>   x86/sgx: Support VA page allocation without reclaiming
>   x86/sgx: Support restricting of enclave page permissions
>   x86/sgx: Support adding of pages to an initialized enclave
>   x86/sgx: Tighten accessible memory range after enclave initialization
>   x86/sgx: Support modifying SGX page type
>   x86/sgx: Support complete page removal
>   x86/sgx: Free up EPC pages directly to support large page ranges
>   Documentation/x86: Introduce enclave runtime management section
>   selftests/sgx: Add test for EPCM permission changes
>   selftests/sgx: Add test for TCS page permission changes
>   selftests/sgx: Test two different SGX2 EAUG flows
>   selftests/sgx: Introduce dynamic entry point
>   selftests/sgx: Introduce TCS initialization enclave operation
>   selftests/sgx: Test complete changing of page type flow
>   selftests/sgx: Test faulty enclave behavior
>   selftests/sgx: Test invalid access to removed enclave page
>   selftests/sgx: Test reclaiming of untouched page
>   selftests/sgx: Page removal stress test
> 
>  Documentation/x86/sgx.rst                     |   15 +
>  arch/x86/include/asm/sgx.h                    |    8 +
>  arch/x86/include/uapi/asm/sgx.h               |   62 +
>  arch/x86/kernel/cpu/sgx/encl.c                |  329 +++-
>  arch/x86/kernel/cpu/sgx/encl.h                |   15 +-
>  arch/x86/kernel/cpu/sgx/encls.h               |   33 +
>  arch/x86/kernel/cpu/sgx/ioctl.c               |  641 +++++++-
>  arch/x86/kernel/cpu/sgx/main.c                |   75 +-
>  arch/x86/kernel/cpu/sgx/sgx.h                 |    3 +
>  tools/testing/selftests/sgx/defines.h         |   23 +
>  tools/testing/selftests/sgx/load.c            |   41 +
>  tools/testing/selftests/sgx/main.c            | 1435 +++++++++++++++++
>  tools/testing/selftests/sgx/main.h            |    1 +
>  tools/testing/selftests/sgx/test_encl.c       |   68 +
>  .../selftests/sgx/test_encl_bootstrap.S       |    6 +
>  15 files changed, 2627 insertions(+), 128 deletions(-)
> 
> 
> base-commit: 672c0c5173427e6b3e2a9bbb7be51ceeec78093a
> prerequisite-patch-id: 1a738c00922b0ec865f2674c6f4f8be9ff9b1aab
> prerequisite-patch-id: 792889ea9bdfae8c150b1be5c16da697bc404422
> prerequisite-patch-id: 78ed2d6251ead724bcb96e0f058bb39dca9eba04
> prerequisite-patch-id: cbb715e565631a146eb3cd902455ebaa5d489872
> prerequisite-patch-id: 3e853bae87d94f8695a48c537ef32a516f415933

Is there something preventing to take this into v5.19 merge window?

I don't think this can improve too much out-of-tree anymore.

BR, Jarkko

Powered by blists - more mailing lists