| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <78efbada-6dd5-ead7-fc10-38b5e1e92fc5@amd.com>
Date: Wed, 1 Jun 2022 15:55:28 +0200
From: Christian König <christian.koenig@....com>
To: Kalesh Singh <kaleshsingh@...gle.com>
Cc: ilkos@...gle.com, tjmercier@...gle.com, surenb@...gle.com,
kernel-team@...roid.com, Jonathan Corbet <corbet@....net>,
Sumit Semwal <sumit.semwal@...aro.org>,
Andrew Morton <akpm@...ux-foundation.org>,
David Hildenbrand <david@...hat.com>,
Johannes Weiner <hannes@...xchg.org>,
Christoph Anton Mitterer <mail@...istoph.anton.mitterer.name>,
Paul Gortmaker <paul.gortmaker@...driver.com>,
Mike Rapoport <rppt@...nel.org>,
Randy Dunlap <rdunlap@...radead.org>,
linux-kernel@...r.kernel.org, linux-fsdevel@...r.kernel.org,
linux-doc@...r.kernel.org, linux-media@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linaro-mm-sig@...ts.linaro.org
Subject: Re: [PATCH 1/2] procfs: Add 'size' to /proc/<pid>/fdinfo/
Am 31.05.22 um 23:25 schrieb Kalesh Singh:
> To be able to account the amount of memory a process is keeping pinned
> by open file descriptors add a 'size' field to fdinfo output.
>
> dmabufs fds already expose a 'size' field for this reason, remove this
> and make it a common field for all fds. This allows tracking of
> other types of memory (e.g. memfd and ashmem in Android).
>
> Signed-off-by: Kalesh Singh <kaleshsingh@...gle.com>
At least for the DMA-buf part feel free to add an Reviewed-by: Christian
König <christian.koenig@....com> for this.
Regards,
Christian.
> ---
>
> Changes from rfc:
> - Split adding 'size' and 'path' into a separate patches, per Christian
> - Split fdinfo seq_printf into separate lines, per Christian
> - Fix indentation (use tabs) in documentaion, per Randy
>
> Documentation/filesystems/proc.rst | 12 ++++++++++--
> drivers/dma-buf/dma-buf.c | 1 -
> fs/proc/fd.c | 9 +++++----
> 3 files changed, 15 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst
> index 1bc91fb8c321..779c05528e87 100644
> --- a/Documentation/filesystems/proc.rst
> +++ b/Documentation/filesystems/proc.rst
> @@ -1886,13 +1886,14 @@ if precise results are needed.
> 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
> ---------------------------------------------------------------
> This file provides information associated with an opened file. The regular
> -files have at least four fields -- 'pos', 'flags', 'mnt_id' and 'ino'.
> +files have at least five fields -- 'pos', 'flags', 'mnt_id', 'ino', and 'size'.
> +
> The 'pos' represents the current offset of the opened file in decimal
> form [see lseek(2) for details], 'flags' denotes the octal O_xxx mask the
> file has been created with [see open(2) for details] and 'mnt_id' represents
> mount ID of the file system containing the opened file [see 3.5
> /proc/<pid>/mountinfo for details]. 'ino' represents the inode number of
> -the file.
> +the file, and 'size' represents the size of the file in bytes.
>
> A typical output is::
>
> @@ -1900,6 +1901,7 @@ A typical output is::
> flags: 0100002
> mnt_id: 19
> ino: 63107
> + size: 0
>
> All locks associated with a file descriptor are shown in its fdinfo too::
>
> @@ -1917,6 +1919,7 @@ Eventfd files
> flags: 04002
> mnt_id: 9
> ino: 63107
> + size: 0
> eventfd-count: 5a
>
> where 'eventfd-count' is hex value of a counter.
> @@ -1930,6 +1933,7 @@ Signalfd files
> flags: 04002
> mnt_id: 9
> ino: 63107
> + size: 0
> sigmask: 0000000000000200
>
> where 'sigmask' is hex value of the signal mask associated
> @@ -1944,6 +1948,7 @@ Epoll files
> flags: 02
> mnt_id: 9
> ino: 63107
> + size: 0
> tfd: 5 events: 1d data: ffffffffffffffff pos:0 ino:61af sdev:7
>
> where 'tfd' is a target file descriptor number in decimal form,
> @@ -1962,6 +1967,7 @@ For inotify files the format is the following::
> flags: 02000000
> mnt_id: 9
> ino: 63107
> + size: 0
> inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
>
> where 'wd' is a watch descriptor in decimal form, i.e. a target file
> @@ -1985,6 +1991,7 @@ For fanotify files the format is::
> flags: 02
> mnt_id: 9
> ino: 63107
> + size: 0
> fanotify flags:10 event-flags:0
> fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
> fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4
> @@ -2010,6 +2017,7 @@ Timerfd files
> flags: 02
> mnt_id: 9
> ino: 63107
> + size: 0
> clockid: 0
> ticks: 0
> settime flags: 01
> diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
> index 32f55640890c..5f2ae38c960f 100644
> --- a/drivers/dma-buf/dma-buf.c
> +++ b/drivers/dma-buf/dma-buf.c
> @@ -378,7 +378,6 @@ static void dma_buf_show_fdinfo(struct seq_file *m, struct file *file)
> {
> struct dma_buf *dmabuf = file->private_data;
>
> - seq_printf(m, "size:\t%zu\n", dmabuf->size);
> /* Don't count the temporary reference taken inside procfs seq_show */
> seq_printf(m, "count:\t%ld\n", file_count(dmabuf->file) - 1);
> seq_printf(m, "exp_name:\t%s\n", dmabuf->exp_name);
> diff --git a/fs/proc/fd.c b/fs/proc/fd.c
> index 913bef0d2a36..464bc3f55759 100644
> --- a/fs/proc/fd.c
> +++ b/fs/proc/fd.c
> @@ -54,10 +54,11 @@ static int seq_show(struct seq_file *m, void *v)
> if (ret)
> return ret;
>
> - seq_printf(m, "pos:\t%lli\nflags:\t0%o\nmnt_id:\t%i\nino:\t%lu\n",
> - (long long)file->f_pos, f_flags,
> - real_mount(file->f_path.mnt)->mnt_id,
> - file_inode(file)->i_ino);
> + seq_printf(m, "pos:\t%lli\n", (long long)file->f_pos);
> + seq_printf(m, "flags:\t0%o\n", f_flags);
> + seq_printf(m, "mnt_id:\t%i\n", real_mount(file->f_path.mnt)->mnt_id);
> + seq_printf(m, "ino:\t%lu\n", file_inode(file)->i_ino);
> + seq_printf(m, "size:\t%lli\n", (long long)file_inode(file)->i_size);
>
> /* show_fd_locks() never deferences files so a stale value is safe */
> show_fd_locks(m, file, files);
Powered by blists - more mailing lists