linux-kernel - [PATCH AUTOSEL 5.17 25/48] arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for bluetooth

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220601135421.2003328-25-sashal@kernel.org>
Date:   Wed,  1 Jun 2022 09:53:58 -0400
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Vijaya Krishna Nivarthi <quic_vnivarth@...cinc.com>,
        Douglas Anderson <dianders@...omium.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Sasha Levin <sashal@...nel.org>, agross@...nel.org,
        robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org
Subject: [PATCH AUTOSEL 5.17 25/48] arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for bluetooth

From: Vijaya Krishna Nivarthi <quic_vnivarth@...cinc.com>

[ Upstream commit 497b272759986af1aa5a25b5e903d082c67bd8f6 ]

WLAN rail was leaking power during RBSC/sleep even after turning BT off.
Change active and sleep pinctrl configurations to handle same.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@...cinc.com>
Reviewed-by: Douglas Anderson <dianders@...omium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Link: https://lore.kernel.org/r/1650556567-4995-2-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index d623d71d8bd4..dd6dac0e1784 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -462,10 +462,13 @@ &qup_uart5_rx {
 
 &qup_uart7_cts {
 	/*
-	 * Configure a pull-down on CTS to match the pull of
-	 * the Bluetooth module.
+	 * Configure a bias-bus-hold on CTS to lower power
+	 * usage when Bluetooth is turned off. Bus hold will
+	 * maintain a low power state regardless of whether
+	 * the Bluetooth module drives the pin in either
+	 * direction or leaves the pin fully unpowered.
 	 */
-	bias-pull-down;
+	bias-bus-hold;
 };
 
 &qup_uart7_rts {
@@ -516,10 +519,13 @@ qup_uart7_sleep_cts: qup-uart7-sleep-cts {
 		pins = "gpio28";
 		function = "gpio";
 		/*
-		 * Configure a pull-down on CTS to match the pull of
-		 * the Bluetooth module.
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
 		 */
-		bias-pull-down;
+		bias-bus-hold;
 	};
 
 	qup_uart7_sleep_rts: qup-uart7-sleep-rts {
-- 
2.35.1