[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20220602060657.GD20979@hu-pkondeti-hyd.qualcomm.com>
Date: Thu, 2 Jun 2022 11:36:57 +0530
From: Pavan Kondeti <quic_pkondeti@...cinc.com>
To: Krishna Kurapati <quic_kriskura@...cinc.com>
CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Felipe Balbi <balbi@...nel.org>,
Stephen Boyd <swboyd@...omium.org>,
Doug Anderson <dianders@...omium.org>,
"Matthias Kaehlcke" <mka@...omium.org>,
Mathias Nyman <mathias.nyman@...el.com>,
<devicetree@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-pm@...r.kernel.org>, <quic_pkondeti@...cinc.com>,
<quic_ppratap@...cinc.com>, <quic_vpulyala@...cinc.com>,
Sandeep Maheswaram <quic_c_sanm@...cinc.com>
Subject: Re: [PATCH v19 2/5] usb: dwc3: core: Host wake up support from
system suspend
Hi Krishna,
On Thu, Jun 02, 2022 at 08:41:52AM +0530, Krishna Kurapati wrote:
> From: Sandeep Maheswaram <quic_c_sanm@...cinc.com>
>
> Check wakeup-source property for dwc3 core node to set the
> wakeup capability. Drop the device_init_wakeup call from
> runtime suspend and resume.
>
> If the dwc3 is wakeup capable, don't power down the USB PHY(s).
> The glue drivers are expected to take care of configuring the
> additional wakeup settings if needed based on the dwc3 wakeup
> capability status. In some SOC designs, powering off the PHY is
> resulting in higher leakage, so this patch save power on such boards.
>
> Signed-off-by: Sandeep Maheswaram <quic_c_sanm@...cinc.com>
> Signed-off-by: Krishna Kurapati <quic_kriskura@...cinc.com>
> Reviewed-by: Pavankumar Kondeti <quic_pkondeti@...cinc.com>
> ---
> drivers/usb/dwc3/core.c | 10 +++-------
> 1 file changed, 3 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index e027c04..c9d7fe3 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1787,6 +1787,7 @@ static int dwc3_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, dwc);
> dwc3_cache_hwparams(dwc);
> + device_init_wakeup(&pdev->dev, of_property_read_bool(dev->of_node, "wakeup-source"));
>
> spin_lock_init(&dwc->lock);
> mutex_init(&dwc->mutex);
> @@ -1948,7 +1949,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
> dwc3_core_exit(dwc);
> break;
> case DWC3_GCTL_PRTCAP_HOST:
> - if (!PMSG_IS_AUTO(msg)) {
> + if (!PMSG_IS_AUTO(msg) && !device_can_wakeup(dwc->dev)) {
> dwc3_core_exit(dwc);
> break;
> }
> @@ -2009,12 +2010,11 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
> spin_unlock_irqrestore(&dwc->lock, flags);
> break;
> case DWC3_GCTL_PRTCAP_HOST:
> - if (!PMSG_IS_AUTO(msg)) {
> + if (!PMSG_IS_AUTO(msg) && !device_can_wakeup(dwc->dev)) {
> ret = dwc3_core_init_for_resume(dwc);
> if (ret)
> return ret;
> dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
> - break;
> }
We should break here for the case the device does not support wakeup and
PM transition is system suspend. See the suspend block above where we break
correctly.
Thanks,
Pavan
Powered by blists - more mailing lists