| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 3 Jun 2022 07:12:20 +0530
From: "Alim Akhtar" <alim.akhtar@...sung.com>
To: "'Chanho Park'" <chanho61.park@...sung.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-scsi@...r.kernel.org>,
<linux-phy@...ts.infradead.org>
Cc: <devicetree@...r.kernel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <vkoul@...nel.org>,
<avri.altman@....com>, <bvanassche@....org>,
<martin.petersen@...cle.com>, <pankaj.dubey@...sung.com>,
<linux-fsd@...la.com>, "'Bharat Uppal'" <bharat.uppal@...sung.com>
Subject: RE: [PATCH 5/6] ufs: host: ufs-exynos: add support for fsd ufs hci
Hi Chanho
Thanks for the review.
>-----Original Message-----
>From: Chanho Park [mailto:chanho61.park@...sung.com]
>Sent: Tuesday, May 31, 2022 1:07 PM
>To: 'Alim Akhtar' <alim.akhtar@...sung.com>; linux-arm-
>kernel@...ts.infradead.org; linux-kernel@...r.kernel.org; linux-
>scsi@...r.kernel.org; linux-phy@...ts.infradead.org
>Cc: devicetree@...r.kernel.org; robh+dt@...nel.org;
>krzysztof.kozlowski+dt@...aro.org; vkoul@...nel.org; avri.altman@....com;
>bvanassche@....org; martin.petersen@...cle.com;
>pankaj.dubey@...sung.com; linux-fsd@...la.com; 'Bharat Uppal'
><bharat.uppal@...sung.com>
>Subject: RE: [PATCH 5/6] ufs: host: ufs-exynos: add support for fsd ufs hci
>
>Hi,
>
>> -----Original Message-----
>> From: Alim Akhtar <alim.akhtar@...sung.com>
>> Sent: Tuesday, May 31, 2022 10:22 AM
>> To: linux-arm-kernel@...ts.infradead.org;
>> linux-kernel@...r.kernel.org; linux-scsi@...r.kernel.org;
>> linux-phy@...ts.infradead.org
>> Cc: devicetree@...r.kernel.org; robh+dt@...nel.org;
>> krzysztof.kozlowski+dt@...aro.org; vkoul@...nel.org;
>> avri.altman@....com; bvanassche@....org;
>martin.petersen@...cle.com;
>> chanho61.park@...sung.com; pankaj.dubey@...sung.com; Alim Akhtar
>> <alim.akhtar@...sung.com>; linux- fsd@...la.com; Bharat Uppal
>> <bharat.uppal@...sung.com>
>> Subject: [PATCH 5/6] ufs: host: ufs-exynos: add support for fsd ufs
>> hci
>>
>> Adds support of UFS HCI which is found in Tesla FSD SoC. FSD also have
>> an addition bit for MPHY APB clock which was not there (was reserved)
>> for previous exynos SoC.
>>
>> Cc: linux-fsd@...la.com
>> Signed-off-by: Bharat Uppal <bharat.uppal@...sung.com>
>> Signed-off-by: Alim Akhtar <alim.akhtar@...sung.com>
>> ---
>> drivers/ufs/host/ufs-exynos.c | 143
>> +++++++++++++++++++++++++++++++++-
>> 1 file changed, 142 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/ufs/host/ufs-exynos.c
>> b/drivers/ufs/host/ufs-exynos.c index a81d8cbd542f..b3efdc4caca2
>> 100644
>> --- a/drivers/ufs/host/ufs-exynos.c
>> +++ b/drivers/ufs/host/ufs-exynos.c
>> @@ -52,11 +52,12 @@
>> #define HCI_ERR_EN_DME_LAYER 0x88
>> #define HCI_CLKSTOP_CTRL 0xB0
>> #define REFCLKOUT_STOP BIT(4)
>> +#define MPHY_APBCLK_STOP BIT(3)
>> #define REFCLK_STOP BIT(2)
>> #define UNIPRO_MCLK_STOP BIT(1)
>> #define UNIPRO_PCLK_STOP BIT(0)
>> #define CLK_STOP_MASK (REFCLKOUT_STOP | REFCLK_STOP |\
>> - UNIPRO_MCLK_STOP |\
>> + UNIPRO_MCLK_STOP |
>MPHY_APBCLK_STOP|\
>
>Please make this change into a separate patch of this series.
>
Sure, will separate it out.
>> UNIPRO_PCLK_STOP)
>> #define HCI_MISC 0xB4
>> #define REFCLK_CTRL_EN BIT(7)
>> @@ -386,6 +387,104 @@ static int exynos7_ufs_post_pwr_change(struct
>> exynos_ufs *ufs,
>> return 0;
>> }
>>
>> +static inline int fsd_ufs_pre_link(struct exynos_ufs *ufs) {
>> + int i;
>> + struct ufs_hba *hba = ufs->hba;
>> +
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x9514), 1000000000L / ufs-
>> >mclk_rate);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x201), 0x12);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x200), 0x40);
>> +
>> + for_each_ufs_tx_lane(ufs, i) {
>> + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xAA, i),
>1000000000L /
>> ufs->mclk_rate);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8F, i), 0x3F);
>> + }
>> +
>> + for_each_ufs_rx_lane(ufs, i) {
>> + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x12, i),
>1000000000L /
>> ufs->mclk_rate);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x5C, i), 0x38);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0F, i), 0x0);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x65, i), 0x1);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x69, i), 0x1);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x21, i), 0x0);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x22, i), 0x0);
>> + }
>> +
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x200), 0x0);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x9536), 0x4E20);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x9564), 0x2e820183);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x155E), 0x0);
>
>Use PA_LOCAL_TX_LCC_ENABLE instead of 0x155E. I think you can find more
>values from unipro.h.
>Please try to use as much as possible :)
>
Noted
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x3000), 0x0);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x3001), 0x1);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x4021), 0x1);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x4020), 0x1);
>
>They can be set from exynos_ufs_establish_connt.
>
Ok,
>> +
>> + return 0;
>> +}
>> +
>> +static inline int fsd_ufs_post_link(struct exynos_ufs *ufs) {
>> + int i;
>> + struct ufs_hba *hba = ufs->hba;
>> + u32 hw_cap_min_tactivate;
>> + u32 peer_rx_min_actv_time_cap;
>> + u32 max_rx_hibern8_time_cap;
>> +
>> + ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(0x8F, 4),
>> + &hw_cap_min_tactivate); /* HW Capability of
>> MIN_TACTIVATE */
>> + ufshcd_dme_get(hba, UIC_ARG_MIB(0x15A8),
>> + &peer_rx_min_actv_time_cap); /* PA_TActivate */
>> + ufshcd_dme_get(hba, UIC_ARG_MIB(0x15A7),
>> + &max_rx_hibern8_time_cap); /* PA_Hibern8Time
>*/
>> +
>> + if (peer_rx_min_actv_time_cap >= hw_cap_min_tactivate)
>> + ufshcd_dme_peer_set(hba, UIC_ARG_MIB(0x15A8),
>> + peer_rx_min_actv_time_cap + 1);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x15A7),
>max_rx_hibern8_time_cap +
>> 1);
>> +
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x9529), 0x01);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x15A4), 0xFA);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x9529), 0x00);
>> +
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x200), 0x40);
>> +
>> + for_each_ufs_rx_lane(ufs, i) {
>> + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x35, i), 0x05);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x73, i), 0x01);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x41, i), 0x02);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x42, i), 0xAC);
>> + }
>> +
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x200), 0x0);
>> +
>> + return 0;
>> +}
>> +
>> +static inline int fsd_ufs_pre_pwr_change(struct exynos_ufs *ufs,
>> + struct ufs_pa_layer_attr *pwr)
>> +{
>> + struct ufs_hba *hba = ufs->hba;
>> +
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x1569), 0x1);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x1584), 0x1);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x2041), 8064);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x2042), 28224);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x2043), 20160);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x15B0), 12000);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x15B1), 32000);
>> + ufshcd_dme_set(hba, UIC_ARG_MIB(0x15B2), 16000);
>> +
>> + unipro_writel(ufs, 8064, 0x7888);
>> + unipro_writel(ufs, 28224, 0x788C);
>> + unipro_writel(ufs, 20160, 0x7890);
>> + unipro_writel(ufs, 12000, 0x78B8);
>> + unipro_writel(ufs, 32000, 0x78BC);
>> + unipro_writel(ufs, 16000, 0x78C0);
>> +
>> + return 0;
>> +}
>> +
>> /*
>> * exynos_ufs_auto_ctrl_hcc - HCI core clock control by h/w
>> * Control should be disabled in the below cases @@ -1595,6 +1694,46
>> @@ static struct exynos_ufs_drv_data exynos_ufs_drvs = {
>> .post_pwr_change = exynos7_ufs_post_pwr_change,
>> };
>>
>> +static struct exynos_ufs_uic_attr fsd_uic_attr = {
>> + .tx_trailingclks = 0x10,
>> + .tx_dif_p_nsec = 3000000, /* unit: ns */
>> + .tx_dif_n_nsec = 1000000, /* unit: ns */
>> + .tx_high_z_cnt_nsec = 20000, /* unit: ns */
>> + .tx_base_unit_nsec = 100000, /* unit: ns */
>> + .tx_gran_unit_nsec = 4000, /* unit: ns */
>> + .tx_sleep_cnt = 1000, /* unit: ns */
>> + .tx_min_activatetime = 0xa,
>> + .rx_filler_enable = 0x2,
>> + .rx_dif_p_nsec = 1000000, /* unit: ns */
>> + .rx_hibern8_wait_nsec = 4000000, /* unit: ns */
>> + .rx_base_unit_nsec = 100000, /* unit: ns */
>> + .rx_gran_unit_nsec = 4000, /* unit: ns */
>> + .rx_sleep_cnt = 1280, /* unit: ns */
>> + .rx_stall_cnt = 320, /* unit: ns */
>> + .rx_hs_g1_sync_len_cap = SYNC_LEN_COARSE(0xf),
>> + .rx_hs_g2_sync_len_cap = SYNC_LEN_COARSE(0xf),
>> + .rx_hs_g3_sync_len_cap = SYNC_LEN_COARSE(0xf),
>> + .rx_hs_g1_prep_sync_len_cap = PREP_LEN(0xf),
>> + .rx_hs_g2_prep_sync_len_cap = PREP_LEN(0xf),
>> + .rx_hs_g3_prep_sync_len_cap = PREP_LEN(0xf),
>> + .pa_dbg_option_suite = 0x2E820183,
>> +};
>> +
>> +struct exynos_ufs_drv_data fsd_ufs_drvs = {
>> + .uic_attr = &fsd_uic_attr,
>> + .quirks = UFSHCD_QUIRK_PRDT_BYTE_GRAN |
>> + UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR |
>> +
>UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR |
>> + UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR,
>> + .opts = EXYNOS_UFS_OPT_HAS_APB_CLK_CTRL |
>> +
>EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL |
>> + EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR
>|
>> + EXYNOS_UFS_OPT_BROKEN_RX_SEL_IDX,
>> + .pre_link = fsd_ufs_pre_link,
>> + .post_link = fsd_ufs_post_link,
>> + .pre_pwr_change = fsd_ufs_pre_pwr_change,
>> +};
>> +
>> static const struct of_device_id exynos_ufs_of_match[] = {
>> { .compatible = "samsung,exynos7-ufs",
>> .data = &exynos_ufs_drvs },
>> @@ -1602,6 +1741,8 @@ static const struct of_device_id
>> exynos_ufs_of_match[] = {
>> .data = &exynosauto_ufs_drvs },
>> { .compatible = "samsung,exynosautov9-ufs-vh",
>> .data = &exynosauto_ufs_vh_drvs },
>> + { .compatible = "tesla,fsd-ufs",
>> + .data = &fsd_ufs_drvs },
>> {},
>> };
>>
>> --
>> 2.25.1
>
Powered by blists - more mailing lists