[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <YpmgzroKbMO3TIsY@apples>
Date: Fri, 3 Jun 2022 07:49:02 +0200
From: Klaus Jensen <its@...elevant.dk>
To: linux-kernel@...r.kernel.org
Cc: Brendan Higgins <brendanhiggins@...gle.com>,
linux-i2c@...r.kernel.org, openbmc@...ts.ozlabs.org,
Wolfram Sang <wsa@...nel.org>,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>,
Klaus Jensen <k.jensen@...sung.com>
Subject: Re: [PATCH] i2c: aspeed: do not mask SLAVE_MATCH
On Jun 2 07:48, Klaus Jensen wrote:
> From: Klaus Jensen <k.jensen@...sung.com>
>
> When commit f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed
> I2C driver") added slave mode support, the SLAVE_MATCH interrupt bit
> (bit 7) was not added to INTR_ALL and so will never be set by the Aspeed
> I2C controller.
>
> Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver")
> Signed-off-by: Klaus Jensen <k.jensen@...sung.com>
> ---
> I am working on slave mode in QEMU and noticed that the device would not
> generate the SLAVE_ADDR_RX_MATCH interrupt. This patch fixes it, but I
> do not have a spec sheet on the Aspeed, so I am not sure if this is the
> intended behavior?
>
> drivers/i2c/busses/i2c-aspeed.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
> index 771e53d3d197..7f432babcd72 100644
> --- a/drivers/i2c/busses/i2c-aspeed.c
> +++ b/drivers/i2c/busses/i2c-aspeed.c
> @@ -86,6 +86,7 @@
> #define ASPEED_I2CD_INTR_ALL \
> (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \
> ASPEED_I2CD_INTR_BUS_RECOVER_DONE | \
> + ASPEED_I2CD_INTR_SLAVE_MATCH | \
> ASPEED_I2CD_INTR_SCL_TIMEOUT | \
> ASPEED_I2CD_INTR_ABNORMAL | \
> ASPEED_I2CD_INTR_NORMAL_STOP | \
> --
> 2.36.1
>
I've been informed that SLAVE_MATCH should always be generated,
regardless of INTR_CTRL, so please ignore this patch.
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists