lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1654240730-31322-1-git-send-email-quic_krichai@quicinc.com>
Date:   Fri,  3 Jun 2022 12:48:50 +0530
From:   Krishna chaitanya chundru <quic_krichai@...cinc.com>
To:     helgaas@...nel.org
Cc:     linux-pci@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org, quic_vbadigan@...cinc.com,
        quic_hemantk@...cinc.com, quic_ramkri@...cinc.com,
        manivannan.sadhasivam@...aro.org, swboyd@...omium.org,
        Krishna chaitanya chundru <quic_krichai@...cinc.com>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Stanimir Varbanov <svarbanov@...sol.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Rob Herring <robh@...nel.org>,
        Krzysztof WilczyƄski <kw@...ux.com>,
        Bjorn Helgaas <bhelgaas@...gle.com>
Subject: [PATCH v1] PCI: qcom: Allow L1 and its sub states on qcom dwc wrapper

Allow L1 and its sub-states in the qcom dwc pcie wrapper.
By default its disabled. So enable it explicitly.

Signed-off-by: Krishna chaitanya chundru <quic_krichai@...cinc.com>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 6ab9089..f60645c 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -41,6 +41,9 @@
 #define L23_CLK_RMV_DIS				BIT(2)
 #define L1_CLK_RMV_DIS				BIT(1)
 
+#define PCIE20_PARF_PM_CTRL			0x20
+#define REQ_NOT_ENTR_L1				BIT(5)
+
 #define PCIE20_PARF_PHY_CTRL			0x40
 #define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK	GENMASK(20, 16)
 #define PHY_CTRL_PHY_TX0_TERM_OFFSET(x)		((x) << 16)
@@ -1267,6 +1270,11 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 	val |= BIT(4);
 	writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
 
+	/* Clear PARF PM REQ_NOT_ENTR_L1 bit to allow L1 states */
+	val = readl(pcie->parf + PCIE20_PARF_PM_CTRL);
+	val &= ~REQ_NOT_ENTR_L1;
+	writel(val, pcie->parf + PCIE20_PARF_PM_CTRL);
+
 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
 		val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
 		val |= BIT(31);
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ