linux-kernel - [PATCH v3 7/8] pinctrl: samsung: do not use bindings header with constants

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220605160508.134075-8-krzysztof.kozlowski@linaro.org>
Date:   Sun,  5 Jun 2022 18:05:07 +0200
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Alim Akhtar <alim.akhtar@...sung.com>,
        Tomasz Figa <tomasz.figa@...il.com>,
        Sylwester Nawrocki <s.nawrocki@...sung.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-gpio@...r.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        Chanho Park <chanho61.park@...sung.com>
Subject: [PATCH v3 7/8] pinctrl: samsung: do not use bindings header with constants

The Samsung SoC pin controller driver uses only three defines from the
bindings header with pin configuration register values, which proves
the point that this header is not a proper bindings-type abstraction
layer with IDs.

Define the needed register values directly in the driver and stop using
the bindings header.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Reviewed-by: Chanho Park <chanho61.park@...sung.com>
---
 drivers/pinctrl/samsung/pinctrl-exynos.c  | 6 ++----
 drivers/pinctrl/samsung/pinctrl-exynos.h  | 3 +++
 drivers/pinctrl/samsung/pinctrl-samsung.c | 4 +---
 drivers/pinctrl/samsung/pinctrl-samsung.h | 8 ++++++++
 4 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index 6d7ca1758292..a8212fc126bf 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -27,8 +27,6 @@
 #include <linux/soc/samsung/exynos-pmu.h>
 #include <linux/soc/samsung/exynos-regs-pmu.h>
 
-#include <dt-bindings/pinctrl/samsung.h>
-
 #include "pinctrl-samsung.h"
 #include "pinctrl-exynos.h"
 
@@ -173,7 +171,7 @@ static int exynos_irq_request_resources(struct irq_data *irqd)
 
 	con = readl(bank->pctl_base + reg_con);
 	con &= ~(mask << shift);
-	con |= EXYNOS_PIN_FUNC_EINT << shift;
+	con |= EXYNOS_PIN_CON_FUNC_EINT << shift;
 	writel(con, bank->pctl_base + reg_con);
 
 	raw_spin_unlock_irqrestore(&bank->slock, flags);
@@ -196,7 +194,7 @@ static void exynos_irq_release_resources(struct irq_data *irqd)
 
 	con = readl(bank->pctl_base + reg_con);
 	con &= ~(mask << shift);
-	con |= EXYNOS_PIN_FUNC_INPUT << shift;
+	con |= PIN_CON_FUNC_INPUT << shift;
 	writel(con, bank->pctl_base + reg_con);
 
 	raw_spin_unlock_irqrestore(&bank->slock, flags);
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
index bfad1ced8017..7bd6d82c9f36 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.h
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
@@ -16,6 +16,9 @@
 #ifndef __PINCTRL_SAMSUNG_EXYNOS_H
 #define __PINCTRL_SAMSUNG_EXYNOS_H
 
+/* Values for the pin CON register */
+#define EXYNOS_PIN_CON_FUNC_EINT	0xf
+
 /* External GPIO and wakeup interrupt related definitions */
 #define EXYNOS_GPIO_ECON_OFFSET		0x700
 #define EXYNOS_GPIO_EFLTCON_OFFSET	0x800
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 26d309d2516d..4837bceb767b 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -26,8 +26,6 @@
 #include <linux/of_device.h>
 #include <linux/spinlock.h>
 
-#include <dt-bindings/pinctrl/samsung.h>
-
 #include "../core.h"
 #include "pinctrl-samsung.h"
 
@@ -614,7 +612,7 @@ static int samsung_gpio_set_direction(struct gpio_chip *gc,
 	data = readl(reg);
 	data &= ~(mask << shift);
 	if (!input)
-		data |= EXYNOS_PIN_FUNC_OUTPUT << shift;
+		data |= PIN_CON_FUNC_OUTPUT << shift;
 	writel(data, reg);
 
 	return 0;
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index fc6f5199c548..9af93e3d8d9f 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -53,6 +53,14 @@ enum pincfg_type {
 #define PINCFG_UNPACK_TYPE(cfg)		((cfg) & PINCFG_TYPE_MASK)
 #define PINCFG_UNPACK_VALUE(cfg)	(((cfg) & PINCFG_VALUE_MASK) >> \
 						PINCFG_VALUE_SHIFT)
+/*
+ * Values for the pin CON register, choosing pin function.
+ * The basic set (input and output) are same between: S3C24xx, S3C64xx, S5PV210,
+ * Exynos ARMv7, Exynos ARMv8, Tesla FSD.
+ */
+#define PIN_CON_FUNC_INPUT		0x0
+#define PIN_CON_FUNC_OUTPUT		0x1
+
 /**
  * enum eint_type - possible external interrupt types.
  * @EINT_TYPE_NONE: bank does not support external interrupts
-- 
2.34.1