linux-kernel - [PATCH 06/36] serial: 8250_dwlib: Fill in rs485

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220606100433.13793-7-ilpo.jarvinen@linux.intel.com>
Date:   Mon,  6 Jun 2022 13:04:03 +0300
From:   Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To:     linux-serial@...r.kernel.org, Greg KH <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        linux-kernel@...r.kernel.org
Cc:     Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Subject: [PATCH 06/36] serial: 8250_dwlib: Fill in rs485_supported

Add information on supported serial_rs485 features. When the driver is
using em485, take advantage of serial8250_em485_supported.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
---
 drivers/tty/serial/8250/8250_dwlib.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
index fbabfdd8c7b8..120b29519d74 100644
--- a/drivers/tty/serial/8250/8250_dwlib.c
+++ b/drivers/tty/serial/8250/8250_dwlib.c
@@ -149,6 +149,11 @@ static bool dw8250_detect_rs485_hw(struct uart_port *p)
 	return reg;
 }
 
+static const struct serial_rs485 dw8250_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RX_DURING_TX | SER_RS485_RTS_ON_SEND |
+		 SER_RS485_RTS_AFTER_SEND,
+};
+
 void dw8250_setup_port(struct uart_port *p)
 {
 	struct dw8250_port_data *pd = p->private_data;
@@ -159,8 +164,10 @@ void dw8250_setup_port(struct uart_port *p)
 	pd->hw_rs485_support = dw8250_detect_rs485_hw(p);
 	if (pd->hw_rs485_support) {
 		p->rs485_config = dw8250_rs485_config;
+		p->rs485_supported = &dw8250_rs485_supported;
 	} else {
 		p->rs485_config = serial8250_em485_config;
+		p->rs485_supported = &serial8250_em485_supported;
 		up->rs485_start_tx = serial8250_em485_start_tx;
 		up->rs485_stop_tx = serial8250_em485_stop_tx;
 	}
-- 
2.30.2