linux-kernel - [PATCH 18/36] serial: mcf: Fill in rs485

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon,  6 Jun 2022 13:04:15 +0300
From:   Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To:     linux-serial@...r.kernel.org, Greg KH <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>, linux-kernel@...r.kernel.org
Cc:     Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Subject: [PATCH 18/36] serial: mcf: Fill in rs485_supported

Add information on supported serial_rs485 features.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
---
 drivers/tty/serial/mcf.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index 2aec62b5d6c4..655255e0c76a 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -453,6 +453,10 @@ static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
 	return 0;
 }
 
+static const struct serial_rs485 mcf_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND,
+};
+
 /****************************************************************************/
 
 /*
@@ -502,6 +506,7 @@ int __init early_mcf_setup(struct mcf_platform_uart *platp)
 		port->uartclk = MCF_BUSCLK;
 		port->flags = UPF_BOOT_AUTOCONF;
 		port->rs485_config = mcf_config_rs485;
+		port->rs485_supported = &mcf_rs485_supported;
 		port->ops = &mcf_uart_ops;
 	}
 
@@ -629,6 +634,7 @@ static int mcf_probe(struct platform_device *pdev)
 		port->ops = &mcf_uart_ops;
 		port->flags = UPF_BOOT_AUTOCONF;
 		port->rs485_config = mcf_config_rs485;
+		port->rs485_supported = &mcf_rs485_supported;
 		port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MCF_CONSOLE);
 
 		uart_add_one_port(&mcf_driver, port);
-- 
2.30.2