linux-kernel - [PATCH 26/36] serial: 8250_fintek: Remove serial

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon,  6 Jun 2022 13:04:23 +0300
From:   Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To:     linux-serial@...r.kernel.org, Greg KH <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>, linux-kernel@...r.kernel.org
Cc:     Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Subject: [PATCH 26/36] serial: 8250_fintek: Remove serial_rs485 sanitization

Serial core handles serial_rs485 sanitization and copying rs485 struct.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
---
 drivers/tty/serial/8250/8250_fintek.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index 6e98c376e082..1fb86c73786c 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -206,19 +206,7 @@ static int fintek_8250_rs485_config(struct uart_port *port,
 		if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
 		    !(rs485->flags & SER_RS485_RTS_AFTER_SEND))
 			return -EINVAL;
-		memset(rs485->padding, 0, sizeof(rs485->padding));
 		config |= RS485_URA;
-	} else {
-		memset(rs485, 0, sizeof(*rs485));
-	}
-
-	rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
-			SER_RS485_RTS_AFTER_SEND;
-
-	/* Only the first port supports delays */
-	if (pdata->index) {
-		rs485->delay_rts_before_send = 0;
-		rs485->delay_rts_after_send = 0;
 	}
 
 	if (rs485->delay_rts_before_send) {
@@ -241,8 +229,6 @@ static int fintek_8250_rs485_config(struct uart_port *port,
 	sio_write_reg(pdata, RS485, config);
 	fintek_8250_exit_key(pdata->base_port);
 
-	port->rs485 = *rs485;
-
 	return 0;
 }
 
-- 
2.30.2