| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 6 Jun 2022 23:28:31 -0400
From: Tianfei Zhang <tianfei.zhang@...el.com>
To: yilun.xu@...el.com, lee.jones@...aro.org
Cc: hao.wu@...el.com, trix@...hat.com, linux-kernel@...r.kernel.org,
linux-fpga@...r.kernel.org, russell.h.weight@...el.com,
matthew.gerlach@...ux.intel.com,
Tianfei Zhang <tianfei.zhang@...el.com>
Subject: [PATCH v1 2/4] mfd: intel-m10-bmc: split into core and spi
Split the common code from intel-m10-bmc driver into intel-m10-bmc-core.
intel-m10-bmc-core is the core MFD functions which can support multiple
bus interfaces like SPI bus.
Signed-off-by: Tianfei Zhang <tianfei.zhang@...el.com>
---
drivers/mfd/Kconfig | 30 +++---
drivers/mfd/Makefile | 5 +-
.../{intel-m10-bmc.c => intel-m10-bmc-core.c} | 101 +++++-------------
drivers/mfd/intel-m10-bmc-spi.c | 83 ++++++++++++++
include/linux/mfd/intel-m10-bmc.h | 15 +++
5 files changed, 144 insertions(+), 90 deletions(-)
rename drivers/mfd/{intel-m10-bmc.c => intel-m10-bmc-core.c} (63%)
create mode 100644 drivers/mfd/intel-m10-bmc-spi.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3b59456f5545..ee8398b02321 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2158,18 +2158,24 @@ config SGI_MFD_IOC3
If you have an SGI Origin, Octane, or a PCI IOC3 card,
then say Y. Otherwise say N.
-config MFD_INTEL_M10_BMC
- tristate "Intel MAX 10 Board Management Controller"
- depends on SPI_MASTER
- select REGMAP_SPI_AVMM
- select MFD_CORE
- help
- Support for the Intel MAX 10 board management controller using the
- SPI interface.
-
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the functionality
- of the device.
+config MFD_INTEL_M10_BMC_CORE
+ tristate
+ select MFD_CORE
+ select REGMAP
+ default n
+
+config MFD_INTEL_M10_BMC_SPI
+ tristate "Intel MAX 10 Board Management Controller with SPI"
+ depends on SPI_MASTER
+ select MFD_INTEL_M10_BMC_CORE
+ select REGMAP_SPI_AVMM
+ help
+ Support for the Intel MAX 10 board management controller using the
+ SPI interface.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
config MFD_RSMU_I2C
tristate "Renesas Synchronization Management Unit with I2C"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 858cacf659d6..b5d3263c1205 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -266,7 +266,10 @@ obj-$(CONFIG_MFD_QCOM_PM8008) += qcom-pm8008.o
obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
-obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
+
+intel-m10-bmc-objs := intel-m10-bmc-core.o
+obj-$(CONFIG_MFD_INTEL_M10_BMC_CORE) += intel-m10-bmc.o
+obj-$(CONFIG_MFD_INTEL_M10_BMC_SPI) += intel-m10-bmc-spi.o
obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o
obj-$(CONFIG_MFD_ATC260X_I2C) += atc260x-i2c.o
diff --git a/drivers/mfd/intel-m10-bmc.c b/drivers/mfd/intel-m10-bmc-core.c
similarity index 63%
rename from drivers/mfd/intel-m10-bmc.c
rename to drivers/mfd/intel-m10-bmc-core.c
index 7e521df29c72..f6dc549e1bc3 100644
--- a/drivers/mfd/intel-m10-bmc.c
+++ b/drivers/mfd/intel-m10-bmc-core.c
@@ -1,23 +1,14 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Intel MAX 10 Board Management Controller chip
+ * Intel MAX 10 Board Management Controller chip - common code
*
- * Copyright (C) 2018-2020 Intel Corporation. All rights reserved.
+ * Copyright (C) 2018-2022 Intel Corporation. All rights reserved.
*/
#include <linux/bitfield.h>
#include <linux/init.h>
#include <linux/mfd/core.h>
#include <linux/mfd/intel-m10-bmc.h>
#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/regmap.h>
-#include <linux/spi/spi.h>
-
-enum m10bmc_type {
- M10_N3000,
- M10_D5005,
- M10_N5010,
-};
static struct mfd_cell m10bmc_d5005_subdevs[] = {
{ .name = "d5005bmc-hwmon" },
@@ -33,26 +24,6 @@ static struct mfd_cell m10bmc_n5010_subdevs[] = {
{ .name = "n5010bmc-hwmon" },
};
-static const struct regmap_range m10bmc_regmap_range[] = {
- regmap_reg_range(M10BMC_LEGACY_BUILD_VER, M10BMC_LEGACY_BUILD_VER),
- regmap_reg_range(M10BMC_SYS_BASE, M10BMC_SYS_END),
- regmap_reg_range(M10BMC_FLASH_BASE, M10BMC_FLASH_END),
-};
-
-static const struct regmap_access_table m10bmc_access_table = {
- .yes_ranges = m10bmc_regmap_range,
- .n_yes_ranges = ARRAY_SIZE(m10bmc_regmap_range),
-};
-
-static struct regmap_config intel_m10bmc_regmap_config = {
- .reg_bits = 32,
- .val_bits = 32,
- .reg_stride = 4,
- .wr_table = &m10bmc_access_table,
- .rd_table = &m10bmc_access_table,
- .max_register = M10BMC_MEM_END,
-};
-
static ssize_t bmc_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -131,7 +102,16 @@ static struct attribute *m10bmc_attrs[] = {
&dev_attr_mac_count.attr,
NULL,
};
-ATTRIBUTE_GROUPS(m10bmc);
+
+static const struct attribute_group m10bmc_group = {
+ .attrs = m10bmc_attrs,
+};
+
+const struct attribute_group *m10bmc_dev_groups[] = {
+ &m10bmc_group,
+ NULL,
+};
+EXPORT_SYMBOL_GPL(m10bmc_dev_groups);
static int check_m10bmc_version(struct intel_m10bmc *ddata)
{
@@ -158,37 +138,21 @@ static int check_m10bmc_version(struct intel_m10bmc *ddata)
return 0;
}
-static int intel_m10_bmc_spi_probe(struct spi_device *spi)
+int m10bmc_dev_init(struct intel_m10bmc *m10bmc)
{
- const struct spi_device_id *id = spi_get_device_id(spi);
- struct device *dev = &spi->dev;
+ enum m10bmc_type type = m10bmc->type;
struct mfd_cell *cells;
- struct intel_m10bmc *ddata;
int ret, n_cell;
- ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
- if (!ddata)
- return -ENOMEM;
-
- ddata->dev = dev;
-
- ddata->regmap =
- devm_regmap_init_spi_avmm(spi, &intel_m10bmc_regmap_config);
- if (IS_ERR(ddata->regmap)) {
- ret = PTR_ERR(ddata->regmap);
- dev_err(dev, "Failed to allocate regmap: %d\n", ret);
- return ret;
- }
-
- spi_set_drvdata(spi, ddata);
+ dev_set_drvdata(m10bmc->dev, m10bmc);
- ret = check_m10bmc_version(ddata);
+ ret = check_m10bmc_version(m10bmc);
if (ret) {
- dev_err(dev, "Failed to identify m10bmc hardware\n");
+ dev_err(m10bmc->dev, "Failed to identify m10bmc hardware\n");
return ret;
}
- switch (id->driver_data) {
+ switch (type) {
case M10_N3000:
cells = m10bmc_pacn3000_subdevs;
n_cell = ARRAY_SIZE(m10bmc_pacn3000_subdevs);
@@ -205,33 +169,16 @@ static int intel_m10_bmc_spi_probe(struct spi_device *spi)
return -ENODEV;
}
- ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, cells, n_cell,
- NULL, 0, NULL);
+ ret = devm_mfd_add_devices(m10bmc->dev, PLATFORM_DEVID_AUTO,
+ cells, n_cell, NULL, 0, NULL);
if (ret)
- dev_err(dev, "Failed to register sub-devices: %d\n", ret);
+ dev_err(m10bmc->dev, "Failed to register sub-devices: %d\n",
+ ret);
return ret;
}
+EXPORT_SYMBOL_GPL(m10bmc_dev_init);
-static const struct spi_device_id m10bmc_spi_id[] = {
- { "m10-n3000", M10_N3000 },
- { "m10-d5005", M10_D5005 },
- { "m10-n5010", M10_N5010 },
- { }
-};
-MODULE_DEVICE_TABLE(spi, m10bmc_spi_id);
-
-static struct spi_driver intel_m10bmc_spi_driver = {
- .driver = {
- .name = "intel-m10-bmc",
- .dev_groups = m10bmc_groups,
- },
- .probe = intel_m10_bmc_spi_probe,
- .id_table = m10bmc_spi_id,
-};
-module_spi_driver(intel_m10bmc_spi_driver);
-
-MODULE_DESCRIPTION("Intel MAX 10 BMC Device Driver");
+MODULE_DESCRIPTION("Intel MAX 10 BMC core MFD driver");
MODULE_AUTHOR("Intel Corporation");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("spi:intel-m10-bmc");
diff --git a/drivers/mfd/intel-m10-bmc-spi.c b/drivers/mfd/intel-m10-bmc-spi.c
new file mode 100644
index 000000000000..9cafbc0f89f0
--- /dev/null
+++ b/drivers/mfd/intel-m10-bmc-spi.c
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel MAX 10 Board Management Controller chip
+ *
+ * Copyright (C) 2018-2021 Intel Corporation. All rights reserved.
+ */
+#include <linux/bitfield.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel-m10-bmc.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+static const struct regmap_range m10bmc_regmap_range[] = {
+ regmap_reg_range(M10BMC_LEGACY_BUILD_VER, M10BMC_LEGACY_BUILD_VER),
+ regmap_reg_range(M10BMC_SYS_BASE, M10BMC_SYS_END),
+ regmap_reg_range(M10BMC_FLASH_BASE, M10BMC_FLASH_END),
+};
+
+static const struct regmap_access_table m10bmc_access_table = {
+ .yes_ranges = m10bmc_regmap_range,
+ .n_yes_ranges = ARRAY_SIZE(m10bmc_regmap_range),
+};
+
+static struct regmap_config intel_m10bmc_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .wr_table = &m10bmc_access_table,
+ .rd_table = &m10bmc_access_table,
+ .max_register = M10BMC_MEM_END,
+};
+
+static int intel_m10_bmc_spi_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ struct device *dev = &spi->dev;
+ struct intel_m10bmc *ddata;
+ int ret;
+
+ ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->dev = dev;
+ ddata->type = (enum m10bmc_type)(id->driver_data);
+
+ ddata->regmap =
+ devm_regmap_init_spi_avmm(spi, &intel_m10bmc_regmap_config);
+ if (IS_ERR(ddata->regmap)) {
+ ret = PTR_ERR(ddata->regmap);
+ dev_err(dev, "Failed to allocate regmap: %d\n", ret);
+ return ret;
+ }
+
+ spi_set_drvdata(spi, ddata);
+
+ return m10bmc_dev_init(ddata);
+}
+
+static const struct spi_device_id m10bmc_spi_id[] = {
+ { "m10-n3000", M10_N3000 },
+ { "m10-d5005", M10_D5005 },
+ { "m10-n5010", M10_N5010 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, m10bmc_spi_id);
+
+static struct spi_driver intel_m10bmc_spi_driver = {
+ .driver = {
+ .name = "intel-m10-bmc",
+ .dev_groups = m10bmc_dev_groups,
+ },
+ .probe = intel_m10_bmc_spi_probe,
+ .id_table = m10bmc_spi_id,
+};
+module_spi_driver(intel_m10bmc_spi_driver);
+
+MODULE_DESCRIPTION("Intel MAX 10 BMC SPI bus interface");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:intel-m10-bmc");
diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
index f0044b14136e..dd81ffdcf168 100644
--- a/include/linux/mfd/intel-m10-bmc.h
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -118,14 +118,23 @@
/* Address of 4KB inverted bit vector containing staging area FLASH count */
#define STAGING_FLASH_COUNT 0x17ffb000
+/* Supported MAX10 BMC types */
+enum m10bmc_type {
+ M10_N3000,
+ M10_D5005,
+ M10_N5010,
+};
+
/**
* struct intel_m10bmc - Intel MAX 10 BMC parent driver data structure
* @dev: this device
* @regmap: the regmap used to access registers by m10bmc itself
+ * @type: the type of MAX10 BMC
*/
struct intel_m10bmc {
struct device *dev;
struct regmap *regmap;
+ enum m10bmc_type type;
};
/*
@@ -159,4 +168,10 @@ m10bmc_raw_read(struct intel_m10bmc *m10bmc, unsigned int addr,
#define m10bmc_sys_read(m10bmc, offset, val) \
m10bmc_raw_read(m10bmc, M10BMC_SYS_BASE + (offset), val)
+/*
+ * MAX10 BMC Core support
+ */
+int m10bmc_dev_init(struct intel_m10bmc *m10bmc);
+extern const struct attribute_group *m10bmc_dev_groups[];
+
#endif /* __MFD_INTEL_M10_BMC_H */
--
2.26.2
Powered by blists - more mailing lists