linux-kernel - [PATCH AUTOSEL 5.18 21/68] usb: dwc3: gadget: Only End Transfer for ep0 data phase

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220607174846.477972-21-sashal@kernel.org>
Date:   Tue,  7 Jun 2022 13:47:47 -0400
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Sasha Levin <sashal@...nel.org>, balbi@...nel.org,
        linux-usb@...r.kernel.org
Subject: [PATCH AUTOSEL 5.18 21/68] usb: dwc3: gadget: Only End Transfer for ep0 data phase

From: Thinh Nguyen <Thinh.Nguyen@...opsys.com>

[ Upstream commit ace17b6ee4f92ab0375d12a1b42494f8590a96b6 ]

The driver shouldn't be able to issue End Transfer to the control
endpoint at anytime. Typically we should only do so in error cases such
as invalid/unexpected direction of Data Phase as described in the
control transfer flow of the programming guide. It _may_ end started
data phase during controller deinitialization from soft disconnect or
driver removal. However, that should not happen because the driver
should be maintained in EP0_SETUP_PHASE during driver tear-down. On
soft-connect, the controller should be reset from a soft-reset and there
should be no issue starting the control endpoint.

Signed-off-by: Thinh Nguyen <Thinh.Nguyen@...opsys.com>
Link: https://lore.kernel.org/r/3c6643678863a26702e4115e9e19d7d94a30d49c.1650593829.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/usb/dwc3/gadget.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0b9c2493844a..05856bcaf2f7 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3673,6 +3673,17 @@ static void dwc3_reset_gadget(struct dwc3 *dwc)
 void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
 	bool interrupt)
 {
+	struct dwc3 *dwc = dep->dwc;
+
+	/*
+	 * Only issue End Transfer command to the control endpoint of a started
+	 * Data Phase. Typically we should only do so in error cases such as
+	 * invalid/unexpected direction as described in the control transfer
+	 * flow of the programming guide.
+	 */
+	if (dep->number <= 1 && dwc->ep0state != EP0_DATA_PHASE)
+		return;
+
 	if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) ||
 	    (dep->flags & DWC3_EP_DELAY_STOP) ||
 	    (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
-- 
2.35.1