[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220607164946.562434947@linuxfoundation.org>
Date: Tue, 7 Jun 2022 19:00:59 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Thorsten Scherer <t.scherer@...elmann.de>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>, Shawn Guo <shawnguo@...nel.org>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.15 394/667] ARM: dts: ci4x10: Adapt to changes in imx6qdl.dtsi regarding fec clocks
From: Thorsten Scherer <t.scherer@...elmann.de>
[ Upstream commit 3d397a1277853498e8b7b305f2610881357c033f ]
Commit f3e7dae323ab ("ARM: dts: imx6qdl: add enet_out clk
support") added another item to the list of clocks for the fec
device. As imx6dl-eckelmann-ci4x10.dts only overwrites clocks,
but not clock-names this resulted in an inconsistency with
clocks having one item more than clock-names.
Also overwrite clock-names with the same value as in
imx6qdl.dtsi. This is a no-op today, but prevents similar
inconsistencies if the soc file will be changed in a similar way
in the future.
Signed-off-by: Thorsten Scherer <t.scherer@...elmann.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
Fixes: f3e7dae323ab ("ARM: dts: imx6qdl: add enet_out clk support")
Signed-off-by: Shawn Guo <shawnguo@...nel.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
index b4a9523e325b..864dc5018451 100644
--- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
+++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
@@ -297,7 +297,11 @@
phy-mode = "rmii";
phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
phy-handle = <&phy>;
- clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&rmii_clk>,
+ <&clks IMX6QDL_CLK_ENET_REF>;
+ clock-names = "ipg", "ahb", "ptp", "enet_out";
status = "okay";
mdio {
--
2.35.1
Powered by blists - more mailing lists