linux-kernel - [PATCH v3 2/2] nvme: handle persistent internal error AER from NVMe controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1654560915-22449-2-git-send-email-mikelley@microsoft.com>
Date:   Mon,  6 Jun 2022 17:15:15 -0700
From:   Michael Kelley <mikelley@...rosoft.com>
To:     kbusch@...nel.org, axboe@...com, hch@....de, sagi@...mberg.me,
        linux-nvme@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc:     mikelley@...rosoft.com, caroline.subramoney@...rosoft.com,
        riwurd@...rosoft.com, nathan.obr@...rosoft.com
Subject: [PATCH v3 2/2] nvme: handle persistent internal error AER from NVMe controller

In the NVM Express Revision 1.4 spec, Figure 145 describes possible
values for an AER with event type "Error" (value 000b). For a
Persistent Internal Error (value 03h), the host should perform a
controller reset.

Add support for this error using code that already exists for
doing a controller reset. As part of this support, introduce
two utility functions for parsing the AER type and subtype.

This new support was tested in a lab environment where we can
generate the persistent internal error on demand, and observe
both the Linux side and NVMe controller side to see that the
controller reset has been done.

Signed-off-by: Michael Kelley <mikelley@...rosoft.com>
---

Changes since v2:
* Instead of reading CSTS, use a constant value as input to
  nvme_should_reset() [Keith Busch]
* Introduce helper functions for parsing the AER result fields
  [Keith Busch]


 drivers/nvme/host/core.c | 41 +++++++++++++++++++++++++++++++++++++++--
 include/linux/nvme.h     |  4 ++++
 2 files changed, 43 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index ea9ed04..1ca8e1f 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -4521,9 +4521,19 @@ static void nvme_fw_act_work(struct work_struct *work)
 	nvme_get_fw_slot_info(ctrl);
 }
 
+static u32 nvme_aer_type(u32 result)
+{
+	return result & 0x7;
+}
+
+static u32 nvme_aer_subtype(u32 result)
+{
+	return (result & 0xff00) >> 8;
+}
+
 static void nvme_handle_aen_notice(struct nvme_ctrl *ctrl, u32 result)
 {
-	u32 aer_notice_type = (result & 0xff00) >> 8;
+	u32 aer_notice_type = nvme_aer_subtype(result);
 
 	trace_nvme_async_event(ctrl, aer_notice_type);
 
@@ -4556,11 +4566,29 @@ static void nvme_handle_aen_notice(struct nvme_ctrl *ctrl, u32 result)
 	}
 }
 
+static void nvme_handle_aer_persistent_error(struct nvme_ctrl *ctrl)
+{
+	trace_nvme_async_event(ctrl, NVME_AER_ERROR);
+
+	/*
+	 * We can't read the CSTS here because we're in an atomic context on
+	 * some transports and the read may require submitting a request to the
+	 * to the controller and getting a response. Such a sequence isn't
+	 * likely to be successful anyway if the controller is reporting a
+	 * persistent internal error. So assume CSTS.CFS is set.
+	 */
+	if (nvme_should_reset(ctrl, NVME_CSTS_CFS)) {
+		dev_warn(ctrl->device, "resetting controller due to AER\n");
+		nvme_reset_ctrl(ctrl);
+	}
+}
+
 void nvme_complete_async_event(struct nvme_ctrl *ctrl, __le16 status,
 		volatile union nvme_result *res)
 {
 	u32 result = le32_to_cpu(res->u32);
-	u32 aer_type = result & 0x07;
+	u32 aer_type = nvme_aer_type(result);
+	u32 aer_subtype = nvme_aer_subtype(result);
 
 	if (le16_to_cpu(status) >> 1 != NVME_SC_SUCCESS)
 		return;
@@ -4570,6 +4598,15 @@ void nvme_complete_async_event(struct nvme_ctrl *ctrl, __le16 status,
 		nvme_handle_aen_notice(ctrl, result);
 		break;
 	case NVME_AER_ERROR:
+		/*
+		 * For a persistent internal error, don't run async_event_work
+		 * to submit a new AER. The controller reset will do it.
+		 */
+		if (aer_subtype == NVME_AER_ERROR_PERSIST_INT_ERR) {
+			nvme_handle_aer_persistent_error(ctrl);
+			return;
+		}
+		fallthrough;
 	case NVME_AER_SMART:
 	case NVME_AER_CSS:
 	case NVME_AER_VS:
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index 29ec3e3..8ced243 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -712,6 +712,10 @@ enum {
 };
 
 enum {
+	NVME_AER_ERROR_PERSIST_INT_ERR	= 0x03,
+};
+
+enum {
 	NVME_AER_NOTICE_NS_CHANGED	= 0x00,
 	NVME_AER_NOTICE_FW_ACT_STARTING = 0x01,
 	NVME_AER_NOTICE_ANA		= 0x03,
-- 
1.8.3.1