Message-ID: <Yp+dTU4NOaIELJh8@google.com>
Date:   Tue, 7 Jun 2022 18:47:41 +0000
From:   Sean Christopherson <seanjc@...gle.com>
To:     Peter Xu <peterx@...hat.com>
Cc:     Paolo Bonzini <pbonzini@...hat.com>,
        Sasha Levin <sashal@...nel.org>, linux-kernel@...r.kernel.org,
        stable@...r.kernel.org, Leonardo Bras <leobras@...hat.com>,
        tglx@...utronix.de, mingo@...hat.com, bp@...en8.de,
        dave.hansen@...ux.intel.com, x86@...nel.org,
        chang.seok.bae@...el.com, luto@...nel.org, kvm@...r.kernel.org
Subject: Re: [PATCH AUTOSEL 5.16 07/28] x86/kvm/fpu: Limit guest
 user_xfeatures to supported bits of XCR0

On Tue, Jun 07, 2022, Peter Xu wrote:
> On Tue, Jun 07, 2022 at 03:04:27PM +0000, Sean Christopherson wrote:
> > On Tue, Jun 07, 2022, Paolo Bonzini wrote:
> > > On 6/6/22 23:27, Peter Xu wrote:
> > > > On Mon, Jun 06, 2022 at 06:18:12PM +0200, Paolo Bonzini wrote:
> > > > > > However there seems to be something missing at least to me, on why it'll
> > > > > > fail a migration from 5.15 (without this patch) to 5.18 (with this patch).
> > > > > > In my test case, user_xfeatures will be 0x7 (FP|SSE|YMM) if without this
> > > > > > patch, but 0x0 if with it.
> > > > > 
> > > > > What CPU model are you using for the VM?
> > > > 
> > > > I didn't specify it, assuming it's qemu64 with no extra parameters.
> > > 
> > > Ok, so indeed it lacks AVX and this patch can have an effect.
> > > 
> > > > > For example, if the source lacks this patch but the destination has it,
> > > > > the source will transmit YMM registers, but the destination will fail to
> > > > > set them if they are not available for the selected CPU model.
> > > > > 
> > > > > See the commit message: "As a bonus, it will also fail if userspace tries to
> > > > > set fpu features (with the KVM_SET_XSAVE ioctl) that are not compatible to
> > > > > the guest configuration.  Such features will never be returned by
> > > > > KVM_GET_XSAVE or KVM_GET_XSAVE2."
> > > > 
> > > > IIUC you meant we should have failed KVM_SET_XSAVE when they're not aligned
> > > > (probably by failing validate_user_xstate_header when checking against the
> > > > user_xfeatures on dest host). But that's probably not my case, because here
> > > > KVM_SET_XSAVE succeeded, it's just that the guest gets a double fault after
> > > > the precopy migration completes (or for postcopy when the switchover is
> > > > done).
> > > 
> > > Difficult to say what's happening without seeing at least the guest code
> > > around the double fault (above you said "fail a migration" and I thought
> > > that was a different scenario than the double fault), and possibly which was
> > > the first exception that contributed to the double fault.
> > 
> > Regardless of why the guest explodes in the way it does, is someone planning on
> > bisecting this (if necessary?) and sending a backport to v5.15?  There's another
> > bug report that is more than likely hitting the same bug.
> 
> What's the bisection you mentioned?  I actually did a bisection and I also
> checked reverting Leo's change can also fix this issue.  Or do you mean
> something else?

Oooooh, sorry!  I got completely turned around.  You ran into a bug with the
fix.  I thought that you were hitting the same issues as Mike where migrating
between hosts with different capabilities is broken in v5.15, but works in v5.18.

> > https://lore.kernel.org/all/48353e0d-e771-8a97-21d4-c65ff3bc4192@sentex.net
> 
> That is kvm64, and I agree it could be the same problem since both qemu64
> and kvm64 models do not have any xsave feature bit declared in cpuid 0xd,
> so potentially we could be migrating some fpu states to it even with
> user_xfeatures==0 on dest host.
> 
> So today I continued the investigation, and I think what's really missing
> is qemu seems to be ignoring the user_xfeatures check for KVM_SET_XSAVE and
> continues even if it returns -EINVAL.  IOW, I'm wondering whether we should
> fail properly and start to check kvm_arch_put_registers() retcode.  But
> that'll be a QEMU fix, and it'll at least not causing random faults
> (e.g. double faults) in guest but we should fail the migration gracefully.
> 
> Sean: a side note is that I can also easily trigger one WARN_ON_ONCE() in
> your commit 98c25ead5eda5 in kvm_arch_vcpu_ioctl_run():
> 
> 	WARN_ON_ONCE(kvm_lapic_hv_timer_in_use(vcpu));
> 
> It'll be great if you'd like to check that up.

Ugh, userspace can force KVM_MP_STATE_UNINITIALIZED via KVM_SET_MP_STATE.  Looks
like QEMU does that when emulating RESET.

Logically, a full RESET of the xAPIC seems like the right thing to do.  I think
we can get away with that without breaking ABI?  And kvm_lapic_reset() has a
related bug where it stops the HR timer but not doesn't handle the HV timer :-/

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index e69b83708f05..948aba894245 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2395,7 +2395,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event)
                return;

        /* Stop the timer in case it's a reset to an active apic */
-       hrtimer_cancel(&apic->lapic_timer.timer);
+       cancel_apic_timer(&apic->lapic_timer.timer);

        /* The xAPIC ID is set at RESET even if the APIC was already enabled. */
        if (!init_event)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 540651cd28d7..ed2c7cb1642d 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -10912,6 +10912,9 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
             mp_state->mp_state == KVM_MP_STATE_INIT_RECEIVED))
                goto out;

+       if (mp_state->mp_state == KVM_MP_STATE_UNINITIALIZED)
+               kvm_lapic_reset(vcpu, false);
+
        if (mp_state->mp_state == KVM_MP_STATE_SIPI_RECEIVED) {
                vcpu->arch.mp_state = KVM_MP_STATE_INIT_RECEIVED;
                set_bit(KVM_APIC_SIPI, &vcpu->arch.apic->pending_events);

Powered by blists - more mailing lists