linux-kernel - [PATCH net-next v1 1/3] net: phy: dp83td510: add SQI support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220607101710.2833332-1-o.rempel@pengutronix.de>
Date:   Tue,  7 Jun 2022 12:17:08 +0200
From:   Oleksij Rempel <o.rempel@...gutronix.de>
To:     Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>
Cc:     Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH net-next v1 1/3] net: phy: dp83td510: add SQI support

Convert MSE (mean-square error) values to SNR and split it SQI (Signal Quality
Indicator) ranges. The used ranges are taken from "OPEN ALLIANCE - Advanced
diagnostic features for 100BASE-T1 automotive Ethernet PHYs"
specification.

Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
 drivers/net/phy/dp83td510.c | 56 +++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/drivers/net/phy/dp83td510.c b/drivers/net/phy/dp83td510.c
index 1ae792b0daaa..441f77bfc9f2 100644
--- a/drivers/net/phy/dp83td510.c
+++ b/drivers/net/phy/dp83td510.c
@@ -27,6 +27,32 @@
 #define DP83TD510E_AN_STAT_1			0x60c
 #define DP83TD510E_MASTER_SLAVE_RESOL_FAIL	BIT(15)
 
+#define DP83TD510E_MSE_DETECT			0xa85
+
+#define DP83TD510_SQI_MAX	7
+
+struct dp83td510_mse_sqi_range {
+	u16 end;
+	u16 start;
+};
+
+/* Register values are converted to SNR(dB) as suggested by
+ * "Application Report - DP83TD510E Cable Diagnostics Toolkit":
+ * SNR(dB) = -10 * log10 (VAL/2^17) - 1.76 dB.
+ * SQI ranges are implemented according to "OPEN ALLIANCE - Advanced diagnostic
+ * features for 100BASE-T1 automotive Ethernet PHYs"
+ */
+static const struct dp83td510_mse_sqi_range dp83td510_mse_sqi_map[] = {
+	{ 0xffff, 0x0569 }, /* < 18dB */
+	{ 0x0569, 0x044c }, /* 18dB =< SNR < 19dB */
+	{ 0x044c, 0x0369 }, /* 19dB =< SNR < 20dB */
+	{ 0x0369, 0x02b6 }, /* 20dB =< SNR < 21dB */
+	{ 0x02b6, 0x0227 }, /* 21dB =< SNR < 22dB */
+	{ 0x0227, 0x01b6 }, /* 22dB =< SNR < 23dB */
+	{ 0x01b6, 0x015b }, /* 23dB =< SNR < 24dB */
+	{ 0x015b, 0x0000 }, /* 24dB =< SNR */
+};
+
 static int dp83td510_config_intr(struct phy_device *phydev)
 {
 	int ret;
@@ -164,6 +190,34 @@ static int dp83td510_config_aneg(struct phy_device *phydev)
 	return genphy_c45_check_and_restart_aneg(phydev, changed);
 }
 
+static int dp83td510_get_sqi(struct phy_device *phydev)
+{
+	u16 mse_val;
+	int sqi;
+	int ret;
+
+	if (!phydev->link)
+		return 0;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_MSE_DETECT);
+	if (ret < 0)
+		return ret;
+
+	mse_val = 0xFFFF & ret;
+	for (sqi = 0; sqi < ARRAY_SIZE(dp83td510_mse_sqi_map); sqi++) {
+		if (mse_val >= dp83td510_mse_sqi_map[sqi].start &&
+		    mse_val <= dp83td510_mse_sqi_map[sqi].end)
+			return sqi;
+	}
+
+	return -EINVAL;
+}
+
+static int dp83td510_get_sqi_max(struct phy_device *phydev)
+{
+	return DP83TD510_SQI_MAX;
+}
+
 static int dp83td510_get_features(struct phy_device *phydev)
 {
 	/* This PHY can't respond on MDIO bus if no RMII clock is enabled.
@@ -192,6 +246,8 @@ static struct phy_driver dp83td510_driver[] = {
 	.get_features	= dp83td510_get_features,
 	.config_intr	= dp83td510_config_intr,
 	.handle_interrupt = dp83td510_handle_interrupt,
+	.get_sqi	= dp83td510_get_sqi,
+	.get_sqi_max	= dp83td510_get_sqi_max,
 
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
-- 
2.30.2