[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <c1b1a66b-7f92-931e-ad5f-8ffa87865c4a@roeck-us.net>
Date: Tue, 7 Jun 2022 05:40:22 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Bagas Sanjaya <bagasdotme@...il.com>,
Stephen Rothwell <sfr@...b.auug.org.au>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux Next Mailing List <linux-next@...r.kernel.org>,
linux-doc@...r.kernel.org
Subject: Re: linux-next: build warnings after merge of the hwmon-staging tree
On 6/7/22 02:37, Bagas Sanjaya wrote:
> On Tue, Jun 07, 2022 at 02:19:58PM +1000, Stephen Rothwell wrote:
>> Hi all,
>>
>> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
>> produced these warnings:
>>
>> Documentation/hwmon/lt7182s.rst:2: WARNING: Explicit markup ends without a blank line; unexpected unindent.
>> Documentation/hwmon/lt7182s.rst:75: WARNING: Malformed table.
>> Text in column margin in table line 33.
>>
>> ====================== ====================================
>> curr[1-2]_label "iin[12]"
>> curr[1-2]_input Measured input current
>> curr[1-2]_max Maximum input current
>> curr[1-2]_max_alarm Current high alarm
>>
>> curr[3-4]_label "iout[1-2]"
>> curr[3-4]_input Measured output current
>> curr[3-4]_highest Highest measured output current
>> curr[3-4]_max Maximum output current
>> curr[3-4]_max_alarm Output current high alarm
>>
>> in[1-2]_label "vin[12]"
>> in[1-2]_input Measured input voltage
>> in[1-2]_highest Highest measured input voltage
>> in[1-2]_crit Critical maximum input voltage
>> in[1-2]_crit_alarm Input voltage critical high alarm
>> in[1-2]_min Minimum input voltage
>> in[1-2]_min_alarm Input voltage low alarm
>> in[1-2]_rated_min Rated minimum input voltage
>> in[1-2]_rated_max Rated maximum input voltage
>> in1_reset_history Write to reset history for all attributes
>>
>> in[3-5]_label "vmon[1-3]"
>> in[3-5]_input Measured voltage on ITH1/ITH2/EXTVCC pins
>> Only available if enabled with MFR_ADC_CONTROL_LT7182S
>> command.
>>
>> in[3-4|6-7]_label "vout[1-2]"
>> in[3-4|6-7]_input Measured output voltage
>> in[3-4|6-7]_highest Highest measured output voltage
>> in[3-4|6-7]_lcrit Critical minimum output voltage
>> in[3-4|6-7]_lcrit_alarm Output voltage critical low alarm
^
>> in[3-4|6-7]_min Minimum output voltage
>> in[3-4|6-7]_max_alarm Output voltage low alarm
>> in[3-4|6-7]_max Maximum output voltage
>> in[3-4|6-7]_max_alarm Output voltage high alarm
>> in[3-4|6-7]_crit Critical maximum output voltage
>> in[3-4|6-7]_crit_alarm Output voltage critical high alarm
>>
>> power[1-2]_label "pout[1-2]"
>> power[1-2]_input Measured output power
>>
>> temp1_input Measured temperature
>> temp1_crit Critical high temperature
>> temp1_crit_alarm Chip temperature critical high alarm
>> temp1_max Maximum temperature
>> temp1_max_alarm Chip temperature high alarm
>> ====================== ====================================
>>
>> Introduced by commit
>>
>> 3d6bcaa21fbd ("hwmon: (pmbus) Add support for Analog Devices LT7182S")
>>
>
> Hi Stephen,
>
> The warning above doesn't appear when doing htmldocs build using Sphinx
> installed from pip on my system.
>
I already fixed it up.
Guenter
Powered by blists - more mailing lists