[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220607165008.414623997@linuxfoundation.org>
Date: Tue, 7 Jun 2022 18:55:10 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Chaitanya Kulkarni <kch@...dia.com>,
Keith Busch <kbusch@...nel.org>,
Christoph Hellwig <hch@....de>, Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.18 192/879] nvme: set non-mdts limits in nvme_scan_work
From: Chaitanya Kulkarni <kch@...dia.com>
[ Upstream commit 78288665b5d0154978fed431985310cb4f166836 ]
In current implementation we set the non-mdts limits by calling
nvme_init_non_mdts_limits() from nvme_init_ctrl_finish().
This also tries to set the limits for the discovery controller which
has no I/O queues resulting in the warning message reported by the
nvme_log_error() when running blktest nvme/002: -
[ 2005.155946] run blktests nvme/002 at 2022-04-09 16:57:47
[ 2005.192223] loop: module loaded
[ 2005.196429] nvmet: adding nsid 1 to subsystem blktests-subsystem-0
[ 2005.200334] nvmet: adding nsid 1 to subsystem blktests-subsystem-1
<------------------------------SNIP---------------------------------->
[ 2008.958108] nvmet: adding nsid 1 to subsystem blktests-subsystem-997
[ 2008.962082] nvmet: adding nsid 1 to subsystem blktests-subsystem-998
[ 2008.966102] nvmet: adding nsid 1 to subsystem blktests-subsystem-999
[ 2008.973132] nvmet: creating discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN testhostnqn.
*[ 2008.973196] nvme1: Identify(0x6), Invalid Field in Command (sct 0x0 / sc 0x2) MORE DNR*
[ 2008.974595] nvme nvme1: new ctrl: "nqn.2014-08.org.nvmexpress.discovery"
[ 2009.103248] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
Move the call of nvme_init_non_mdts_limits() to nvme_scan_work() after
we verify that I/O queues are created since that is a converging point
for each transport where these limits are actually used.
1. FC :
nvme_fc_create_association()
...
nvme_fc_create_io_queues(ctrl);
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
2. PCIe:-
nvme_reset_work()
...
nvme_setup_io_queues()
nvme_create_io_queues()
nvme_alloc_queue()
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
3. RDMA :-
nvme_rdma_setup_ctrl
...
nvme_rdma_configure_io_queues
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
4. TCP :-
nvme_tcp_setup_ctrl
...
nvme_tcp_configure_io_queues
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
* nvme_scan_work()
...
nvme_validate_or_alloc_ns()
nvme_alloc_ns()
nvme_update_ns_info()
nvme_update_disk_info()
nvme_config_discard() <---
blk_queue_max_write_zeroes_sectors() <---
Signed-off-by: Chaitanya Kulkarni <kch@...dia.com>
Reviewed-by: Keith Busch <kbusch@...nel.org>
Signed-off-by: Christoph Hellwig <hch@....de>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/nvme/host/core.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index e1846d04817f..ac32d1cd8477 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3080,10 +3080,6 @@ int nvme_init_ctrl_finish(struct nvme_ctrl *ctrl)
if (ret)
return ret;
- ret = nvme_init_non_mdts_limits(ctrl);
- if (ret < 0)
- return ret;
-
ret = nvme_configure_apst(ctrl);
if (ret < 0)
return ret;
@@ -4237,11 +4233,26 @@ static void nvme_scan_work(struct work_struct *work)
{
struct nvme_ctrl *ctrl =
container_of(work, struct nvme_ctrl, scan_work);
+ int ret;
/* No tagset on a live ctrl means IO queues could not created */
if (ctrl->state != NVME_CTRL_LIVE || !ctrl->tagset)
return;
+ /*
+ * Identify controller limits can change at controller reset due to
+ * new firmware download, even though it is not common we cannot ignore
+ * such scenario. Controller's non-mdts limits are reported in the unit
+ * of logical blocks that is dependent on the format of attached
+ * namespace. Hence re-read the limits at the time of ns allocation.
+ */
+ ret = nvme_init_non_mdts_limits(ctrl);
+ if (ret < 0) {
+ dev_warn(ctrl->device,
+ "reading non-mdts-limits failed: %d\n", ret);
+ return;
+ }
+
if (test_and_clear_bit(NVME_AER_NOTICE_NS_CHANGED, &ctrl->events)) {
dev_info(ctrl->device, "rescanning namespaces.\n");
nvme_clear_changed_ns_log(ctrl);
--
2.35.1
Powered by blists - more mailing lists