Date:   Wed, 08 Jun 2022 14:18:16 +0800
From:   Ying Huang <ying.huang@...el.com>
To:     Aneesh Kumar K V <aneesh.kumar@...ux.ibm.com>,
        Yang Shi <shy828301@...il.com>
Cc:     Linux MM <linux-mm@...ck.org>,
        Andrew Morton <akpm@...ux-foundation.org>,
        Wei Xu <weixugc@...gle.com>, Greg Thelen <gthelen@...gle.com>,
        Davidlohr Bueso <dave@...olabs.net>,
        Tim C Chen <tim.c.chen@...el.com>,
        Brice Goglin <brice.goglin@...il.com>,
        Michal Hocko <mhocko@...nel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Hesham Almatary <hesham.almatary@...wei.com>,
        Dave Hansen <dave.hansen@...el.com>,
        Jonathan Cameron <Jonathan.Cameron@...wei.com>,
        Alistair Popple <apopple@...dia.com>,
        Dan Williams <dan.j.williams@...el.com>,
        Feng Tang <feng.tang@...el.com>,
        Jagdish Gediya <jvgediya@...ux.ibm.com>,
        Baolin Wang <baolin.wang@...ux.alibaba.com>,
        David Rientjes <rientjes@...gle.com>
Subject: Re: [PATCH v5 1/9] mm/demotion: Add support for explicit memory
 tiers

On Wed, 2022-06-08 at 10:28 +0530, Aneesh Kumar K V wrote:
> On 6/8/22 3:02 AM, Yang Shi wrote:
> > On Fri, Jun 3, 2022 at 6:43 AM Aneesh Kumar K.V
> > <aneesh.kumar@...ux.ibm.com> wrote:
> > > 
> > > In the current kernel, memory tiers are defined implicitly via a
> > > demotion path relationship between NUMA nodes, which is created
> > > during the kernel initialization and updated when a NUMA node is
> > > hot-added or hot-removed.  The current implementation puts all
> > > nodes with CPU into the top tier, and builds the tier hierarchy
> > > tier-by-tier by establishing the per-node demotion targets based
> > > on the distances between nodes.
> > > 
> > > This current memory tier kernel interface needs to be improved for
> > > several important use cases,
> > > 
> > > The current tier initialization code always initializes
> > > each memory-only NUMA node into a lower tier.  But a memory-only
> > > NUMA node may have a high performance memory device (e.g. a DRAM
> > > device attached via CXL.mem or a DRAM-backed memory-only node on
> > > a virtual machine) and should be put into a higher tier.
> > > 
> > > The current tier hierarchy always puts CPU nodes into the top
> > > tier. But on a system with HBM or GPU devices, the
> > > memory-only NUMA nodes mapping these devices should be in the
> > > top tier, and DRAM nodes with CPUs are better to be placed into the
> > > next lower tier.
> > > 
> > > With current kernel higher tier node can only be demoted to selected nodes on the
> > > next lower tier as defined by the demotion path, not any other
> > > node from any lower tier.  This strict, hard-coded demotion order
> > > does not work in all use cases (e.g. some use cases may want to
> > > allow cross-socket demotion to another node in the same demotion
> > > tier as a fallback when the preferred demotion node is out of
> > > space), This demotion order is also inconsistent with the page
> > > allocation fallback order when all the nodes in a higher tier are
> > > out of space: The page allocation can fall back to any node from
> > > any lower tier, whereas the demotion order doesn't allow that.
> > > 
> > > The current kernel also don't provide any interfaces for the
> > > userspace to learn about the memory tier hierarchy in order to
> > > optimize its memory allocations.
> > > 
> > > This patch series address the above by defining memory tiers explicitly.
> > > 
> > > This patch introduce explicity memory tiers with ranks. The rank
> > > value of a memory tier is used to derive the demotion order between
> > > NUMA nodes. The memory tiers present in a system can be found at
> > > 
> > > /sys/devices/system/memtier/memtierN/
> > > 
> > > The nodes which are part of a specific memory tier can be listed
> > > via
> > > /sys/devices/system/memtier/memtierN/nodelist
> > > 
> > > "Rank" is an opaque value. Its absolute value doesn't have any
> > > special meaning. But the rank values of different memtiers can be
> > > compared with each other to determine the memory tier order.
> > > 
> > > For example, if we have 3 memtiers: memtier0, memtier1, memiter2, and
> > > their rank values are 300, 200, 100, then the memory tier order is:
> > > memtier0 -> memtier2 -> memtier1, where memtier0 is the highest tier
> > > and memtier1 is the lowest tier.
> > > 
> > > The rank value of each memtier should be unique.
> > > 
> > > A higher rank memory tier will appear first in the demotion order
> > > than a lower rank memory tier. ie. while reclaim we choose a node
> > > in higher rank memory tier to demote pages to as compared to a node
> > > in a lower rank memory tier.
> > > 
> > > For now we are not adding the dynamic number of memory tiers.
> > > But a future series supporting that is possible. Currently
> > > number of tiers supported is limitted to MAX_MEMORY_TIERS(3).
> > > When doing memory hotplug, if not added to a memory tier, the NUMA
> > > node gets added to DEFAULT_MEMORY_TIER(1).
> > > 
> > > This patch is based on the proposal sent by Wei Xu <weixugc@...gle.com> at [1].
> > > 
> > > [1] https://lore.kernel.org/linux-mm/CAAPL-u9Wv+nH1VOZTj=9p9S70Y3Qz3+63EkqncRDdHfubsrjfw@mail.gmail.com
> > > 
> > > Suggested-by: Wei Xu <weixugc@...gle.com>
> > > Signed-off-by: Jagdish Gediya <jvgediya@...ux.ibm.com>
> > > Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@...ux.ibm.com>
> > > ---
> > >   include/linux/memory-tiers.h |  20 ++++
> > >   mm/Kconfig                   |  11 ++
> > >   mm/Makefile                  |   1 +
> > >   mm/memory-tiers.c            | 188 +++++++++++++++++++++++++++++++++++
> > >   4 files changed, 220 insertions(+)
> > >   create mode 100644 include/linux/memory-tiers.h
> > >   create mode 100644 mm/memory-tiers.c
> > > 
> > > diff --git a/include/linux/memory-tiers.h b/include/linux/memory-tiers.h
> > > new file mode 100644
> > > index 000000000000..e17f6b4ee177
> > > --- /dev/null
> > > +++ b/include/linux/memory-tiers.h
> > > @@ -0,0 +1,20 @@
> > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > +#ifndef _LINUX_MEMORY_TIERS_H
> > > +#define _LINUX_MEMORY_TIERS_H
> > > +
> > > +#ifdef CONFIG_TIERED_MEMORY
> > > +
> > > +#define MEMORY_TIER_HBM_GPU    0
> > > +#define MEMORY_TIER_DRAM       1
> > > +#define MEMORY_TIER_PMEM       2
> > > +
> > > +#define MEMORY_RANK_HBM_GPU    300
> > > +#define MEMORY_RANK_DRAM       200
> > > +#define MEMORY_RANK_PMEM       100
> > > +
> > > +#define DEFAULT_MEMORY_TIER    MEMORY_TIER_DRAM
> > > +#define MAX_MEMORY_TIERS  3
> > > +
> > > +#endif /* CONFIG_TIERED_MEMORY */
> > > +
> > > +#endif
> > > diff --git a/mm/Kconfig b/mm/Kconfig
> > > index 169e64192e48..08a3d330740b 100644
> > > --- a/mm/Kconfig
> > > +++ b/mm/Kconfig
> > > @@ -614,6 +614,17 @@ config ARCH_ENABLE_HUGEPAGE_MIGRATION
> > >   config ARCH_ENABLE_THP_MIGRATION
> > >          bool
> > > 
> > > +config TIERED_MEMORY
> > > +       bool "Support for explicit memory tiers"
> > > +       def_bool n
> > > +       depends on MIGRATION && NUMA
> > > +       help
> > > +         Support to split nodes into memory tiers explicitly and
> > > +         to demote pages on reclaim to lower tiers. This option
> > > +         also exposes sysfs interface to read nodes available in
> > > +         specific tier and to move specific node among different
> > > +         possible tiers.
> > 
> > IMHO we should not need a new kernel config. If tiering is not present
> > then there is just one tier on the system. And tiering is a kind of
> > hardware configuration, the information could be shown regardless of
> > whether demotion/promotion is supported/enabled or not.
> > 
> 
> This was added so that we could avoid doing multiple
> 
> #if defined(CONFIG_MIGRATION) && defined(CONFIG_NUMA)
> 
> Initially I had that as def_bool y and depends on MIGRATION && NUMA. But 
> it was later suggested that def_bool is not recommended for newer config.
> 
> How about
> 
>   config TIERED_MEMORY
>   	bool "Support for explicit memory tiers"

Need to remove this line too to make it invisible for users?

Best Regards,
HUang, Ying

> -	def_bool n
> -	depends on MIGRATION && NUMA
> -	help
> -	  Support to split nodes into memory tiers explicitly and
> -	  to demote pages on reclaim to lower tiers. This option
> -	  also exposes sysfs interface to read nodes available in
> -	  specific tier and to move specific node among different
> -	  possible tiers.
> +	def_bool MIGRATION && NUMA
> 
>   config HUGETLB_PAGE_SIZE_VARIABLE
>   	def_bool n
> 
> ie, we just make it a Kconfig variable without exposing it to the user?
> 
> -aneesh

Powered by blists - more mailing lists