| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e71ba4db-202e-a74a-3c36-b4dea5566d43@opensynergy.com>
Date: Wed, 8 Jun 2022 17:19:09 +0200
From: Peter Hilber <peter.hilber@...nsynergy.com>
To: Cristian Marussi <cristian.marussi@....com>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: sudeep.holla@....com
Subject: Re: [PATCH 3/3] firmware: arm_scmi: Use preferred strscpy to handle
strings
On 08.06.22 11:55, Cristian Marussi wrote:
> Remove strlcpy calls used to collect short domain names of SCMI resources
> in favour of the preferred strscpy; while doing that change also the used
> count argument of strscpy to make always use of SCMI_SHORT_NAME_MAX_SIZE
> while dealing with short domain names, so as to limit the possibility that
> an ill-formed non-NULL terminated short reply from the SCMI platform
> firmware can leak stale content laying in the underlying transport shared
> memory area.
>
> Cc: Peter Hilber <peter.hilber@...nsynergy.com>
> Cc: Sudeep Holla <sudeep.holla@....com>
> Fixes: ca64b719a1e66 ("firmware: arm_scmi: use strlcpy to ensure NULL-terminated strings")
> Signed-off-by: Cristian Marussi <cristian.marussi@....com>
Reviewed-by: Peter Hilber <peter.hilber@...nsynergy.com>
> ---
> drivers/firmware/arm_scmi/clock.c | 2 +-
> drivers/firmware/arm_scmi/perf.c | 2 +-
> drivers/firmware/arm_scmi/power.c | 2 +-
> drivers/firmware/arm_scmi/reset.c | 2 +-
> drivers/firmware/arm_scmi/sensors.c | 4 ++--
> drivers/firmware/arm_scmi/voltage.c | 2 +-
> 6 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
> index 1a718faa4192..c7a83f6e38e5 100644
> --- a/drivers/firmware/arm_scmi/clock.c
> +++ b/drivers/firmware/arm_scmi/clock.c
> @@ -153,7 +153,7 @@ static int scmi_clock_attributes_get(const struct scmi_protocol_handle *ph,
> if (!ret) {
> u32 latency = 0;
> attributes = le32_to_cpu(attr->attributes);
> - strlcpy(clk->name, attr->name, SCMI_MAX_STR_SIZE);
> + strscpy(clk->name, attr->name, SCMI_SHORT_NAME_MAX_SIZE);
> /* clock_enable_latency field is present only since SCMI v3.1 */
> if (PROTOCOL_REV_MAJOR(version) >= 0x2)
> latency = le32_to_cpu(attr->clock_enable_latency);
> diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
> index c1f701623058..bbb0331801ff 100644
> --- a/drivers/firmware/arm_scmi/perf.c
> +++ b/drivers/firmware/arm_scmi/perf.c
> @@ -252,7 +252,7 @@ scmi_perf_domain_attributes_get(const struct scmi_protocol_handle *ph,
> dom_info->mult_factor =
> (dom_info->sustained_freq_khz * 1000) /
> dom_info->sustained_perf_level;
> - strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
> + strscpy(dom_info->name, attr->name, SCMI_SHORT_NAME_MAX_SIZE);
> }
>
> ph->xops->xfer_put(ph, t);
> diff --git a/drivers/firmware/arm_scmi/power.c b/drivers/firmware/arm_scmi/power.c
> index 964882cc8747..356e83631664 100644
> --- a/drivers/firmware/arm_scmi/power.c
> +++ b/drivers/firmware/arm_scmi/power.c
> @@ -122,7 +122,7 @@ scmi_power_domain_attributes_get(const struct scmi_protocol_handle *ph,
> dom_info->state_set_notify = SUPPORTS_STATE_SET_NOTIFY(flags);
> dom_info->state_set_async = SUPPORTS_STATE_SET_ASYNC(flags);
> dom_info->state_set_sync = SUPPORTS_STATE_SET_SYNC(flags);
> - strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
> + strscpy(dom_info->name, attr->name, SCMI_SHORT_NAME_MAX_SIZE);
> }
> ph->xops->xfer_put(ph, t);
>
> diff --git a/drivers/firmware/arm_scmi/reset.c b/drivers/firmware/arm_scmi/reset.c
> index a420a9102094..673f3eb498f4 100644
> --- a/drivers/firmware/arm_scmi/reset.c
> +++ b/drivers/firmware/arm_scmi/reset.c
> @@ -116,7 +116,7 @@ scmi_reset_domain_attributes_get(const struct scmi_protocol_handle *ph,
> dom_info->latency_us = le32_to_cpu(attr->latency);
> if (dom_info->latency_us == U32_MAX)
> dom_info->latency_us = 0;
> - strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
> + strscpy(dom_info->name, attr->name, SCMI_SHORT_NAME_MAX_SIZE);
> }
>
> ph->xops->xfer_put(ph, t);
> diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
> index 58fe4f0175be..42efaee27b7c 100644
> --- a/drivers/firmware/arm_scmi/sensors.c
> +++ b/drivers/firmware/arm_scmi/sensors.c
> @@ -412,7 +412,7 @@ iter_axes_desc_process_response(const struct scmi_protocol_handle *ph,
> attrh = le32_to_cpu(adesc->attributes_high);
> a->scale = S32_EXT(SENSOR_SCALE(attrh));
> a->type = SENSOR_TYPE(attrh);
> - strscpy(a->name, adesc->name, SCMI_MAX_STR_SIZE);
> + strscpy(a->name, adesc->name, SCMI_SHORT_NAME_MAX_SIZE);
>
> if (a->extended_attrs) {
> unsigned int ares = le32_to_cpu(adesc->resolution);
> @@ -633,7 +633,7 @@ iter_sens_descr_process_response(const struct scmi_protocol_handle *ph,
> SUPPORTS_AXIS(attrh) ?
> SENSOR_AXIS_NUMBER(attrh) : 0,
> SCMI_MAX_NUM_SENSOR_AXIS);
> - strscpy(s->name, sdesc->name, SCMI_MAX_STR_SIZE);
> + strscpy(s->name, sdesc->name, SCMI_SHORT_NAME_MAX_SIZE);
>
> /*
> * If supported overwrite short name with the extended
> diff --git a/drivers/firmware/arm_scmi/voltage.c b/drivers/firmware/arm_scmi/voltage.c
> index 97df6d3dd131..5de93f637bd4 100644
> --- a/drivers/firmware/arm_scmi/voltage.c
> +++ b/drivers/firmware/arm_scmi/voltage.c
> @@ -233,7 +233,7 @@ static int scmi_voltage_descriptors_get(const struct scmi_protocol_handle *ph,
> v = vinfo->domains + dom;
> v->id = dom;
> attributes = le32_to_cpu(resp_dom->attr);
> - strlcpy(v->name, resp_dom->name, SCMI_MAX_STR_SIZE);
> + strscpy(v->name, resp_dom->name, SCMI_SHORT_NAME_MAX_SIZE);
>
> /*
> * If supported overwrite short name with the extended one;
Powered by blists - more mailing lists