Message-ID: <CAHbLzkoLr+RugZ4nq-HpVK2S3frnSor5MJPxRH4PsUPC-sfEGQ@mail.gmail.com>
Date:   Wed, 8 Jun 2022 09:37:42 -0700
From:   Yang Shi <shy828301@...il.com>
To:     Ying Huang <ying.huang@...el.com>
Cc:     "Aneesh Kumar K.V" <aneesh.kumar@...ux.ibm.com>,
        Linux MM <linux-mm@...ck.org>,
        Andrew Morton <akpm@...ux-foundation.org>,
        Wei Xu <weixugc@...gle.com>, Greg Thelen <gthelen@...gle.com>,
        Davidlohr Bueso <dave@...olabs.net>,
        Tim C Chen <tim.c.chen@...el.com>,
        Brice Goglin <brice.goglin@...il.com>,
        Michal Hocko <mhocko@...nel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Hesham Almatary <hesham.almatary@...wei.com>,
        Dave Hansen <dave.hansen@...el.com>,
        Jonathan Cameron <Jonathan.Cameron@...wei.com>,
        Alistair Popple <apopple@...dia.com>,
        Dan Williams <dan.j.williams@...el.com>,
        Feng Tang <feng.tang@...el.com>,
        Jagdish Gediya <jvgediya@...ux.ibm.com>,
        Baolin Wang <baolin.wang@...ux.alibaba.com>,
        David Rientjes <rientjes@...gle.com>
Subject: Re: [PATCH v5 1/9] mm/demotion: Add support for explicit memory tiers

On Tue, Jun 7, 2022 at 6:34 PM Ying Huang <ying.huang@...el.com> wrote:
>
> On Tue, 2022-06-07 at 14:32 -0700, Yang Shi wrote:
> > On Fri, Jun 3, 2022 at 6:43 AM Aneesh Kumar K.V
> > <aneesh.kumar@...ux.ibm.com> wrote:
> > >
> > > In the current kernel, memory tiers are defined implicitly via a
> > > demotion path relationship between NUMA nodes, which is created
> > > during the kernel initialization and updated when a NUMA node is
> > > hot-added or hot-removed.  The current implementation puts all
> > > nodes with CPU into the top tier, and builds the tier hierarchy
> > > tier-by-tier by establishing the per-node demotion targets based
> > > on the distances between nodes.
> > >
> > > This current memory tier kernel interface needs to be improved for
> > > several important use cases,
> > >
> > > The current tier initialization code always initializes
> > > each memory-only NUMA node into a lower tier.  But a memory-only
> > > NUMA node may have a high performance memory device (e.g. a DRAM
> > > device attached via CXL.mem or a DRAM-backed memory-only node on
> > > a virtual machine) and should be put into a higher tier.
> > >
> > > The current tier hierarchy always puts CPU nodes into the top
> > > tier. But on a system with HBM or GPU devices, the
> > > memory-only NUMA nodes mapping these devices should be in the
> > > top tier, and DRAM nodes with CPUs are better to be placed into the
> > > next lower tier.
> > >
> > > With current kernel higher tier node can only be demoted to selected nodes on the
> > > next lower tier as defined by the demotion path, not any other
> > > node from any lower tier.  This strict, hard-coded demotion order
> > > does not work in all use cases (e.g. some use cases may want to
> > > allow cross-socket demotion to another node in the same demotion
> > > tier as a fallback when the preferred demotion node is out of
> > > space), This demotion order is also inconsistent with the page
> > > allocation fallback order when all the nodes in a higher tier are
> > > out of space: The page allocation can fall back to any node from
> > > any lower tier, whereas the demotion order doesn't allow that.
> > >
> > > The current kernel also don't provide any interfaces for the
> > > userspace to learn about the memory tier hierarchy in order to
> > > optimize its memory allocations.
> > >
> > > This patch series address the above by defining memory tiers explicitly.
> > >
> > > This patch introduce explicity memory tiers with ranks. The rank
> > > value of a memory tier is used to derive the demotion order between
> > > NUMA nodes. The memory tiers present in a system can be found at
> > >
> > > /sys/devices/system/memtier/memtierN/
> > >
> > > The nodes which are part of a specific memory tier can be listed
> > > via
> > > /sys/devices/system/memtier/memtierN/nodelist
> > >
> > > "Rank" is an opaque value. Its absolute value doesn't have any
> > > special meaning. But the rank values of different memtiers can be
> > > compared with each other to determine the memory tier order.
> > >
> > > For example, if we have 3 memtiers: memtier0, memtier1, memiter2, and
> > > their rank values are 300, 200, 100, then the memory tier order is:
> > > memtier0 -> memtier2 -> memtier1, where memtier0 is the highest tier
> > > and memtier1 is the lowest tier.
> > >
> > > The rank value of each memtier should be unique.
> > >
> > > A higher rank memory tier will appear first in the demotion order
> > > than a lower rank memory tier. ie. while reclaim we choose a node
> > > in higher rank memory tier to demote pages to as compared to a node
> > > in a lower rank memory tier.
> > >
> > > For now we are not adding the dynamic number of memory tiers.
> > > But a future series supporting that is possible. Currently
> > > number of tiers supported is limitted to MAX_MEMORY_TIERS(3).
> > > When doing memory hotplug, if not added to a memory tier, the NUMA
> > > node gets added to DEFAULT_MEMORY_TIER(1).
> > >
> > > This patch is based on the proposal sent by Wei Xu <weixugc@...gle.com> at [1].
> > >
> > > [1] https://lore.kernel.org/linux-mm/CAAPL-u9Wv+nH1VOZTj=9p9S70Y3Qz3+63EkqncRDdHfubsrjfw@mail.gmail.com
> > >
> > > Suggested-by: Wei Xu <weixugc@...gle.com>
> > > Signed-off-by: Jagdish Gediya <jvgediya@...ux.ibm.com>
> > > Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@...ux.ibm.com>
> > > ---
> > >  include/linux/memory-tiers.h |  20 ++++
> > >  mm/Kconfig                   |  11 ++
> > >  mm/Makefile                  |   1 +
> > >  mm/memory-tiers.c            | 188 +++++++++++++++++++++++++++++++++++
> > >  4 files changed, 220 insertions(+)
> > >  create mode 100644 include/linux/memory-tiers.h
> > >  create mode 100644 mm/memory-tiers.c
> > >
> > > diff --git a/include/linux/memory-tiers.h b/include/linux/memory-tiers.h
> > > new file mode 100644
> > > index 000000000000..e17f6b4ee177
> > > --- /dev/null
> > > +++ b/include/linux/memory-tiers.h
> > > @@ -0,0 +1,20 @@
> > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > +#ifndef _LINUX_MEMORY_TIERS_H
> > > +#define _LINUX_MEMORY_TIERS_H
> > > +
> > > +#ifdef CONFIG_TIERED_MEMORY
> > > +
> > > +#define MEMORY_TIER_HBM_GPU    0
> > > +#define MEMORY_TIER_DRAM       1
> > > +#define MEMORY_TIER_PMEM       2
> > > +
> > > +#define MEMORY_RANK_HBM_GPU    300
> > > +#define MEMORY_RANK_DRAM       200
> > > +#define MEMORY_RANK_PMEM       100
> > > +
> > > +#define DEFAULT_MEMORY_TIER    MEMORY_TIER_DRAM
> > > +#define MAX_MEMORY_TIERS  3
> > > +
> > > +#endif /* CONFIG_TIERED_MEMORY */
> > > +
> > > +#endif
> > > diff --git a/mm/Kconfig b/mm/Kconfig
> > > index 169e64192e48..08a3d330740b 100644
> > > --- a/mm/Kconfig
> > > +++ b/mm/Kconfig
> > > @@ -614,6 +614,17 @@ config ARCH_ENABLE_HUGEPAGE_MIGRATION
> > >  config ARCH_ENABLE_THP_MIGRATION
> > >         bool
> > >
> > > +config TIERED_MEMORY
> > > +       bool "Support for explicit memory tiers"
> > > +       def_bool n
> > > +       depends on MIGRATION && NUMA
> > > +       help
> > > +         Support to split nodes into memory tiers explicitly and
> > > +         to demote pages on reclaim to lower tiers. This option
> > > +         also exposes sysfs interface to read nodes available in
> > > +         specific tier and to move specific node among different
> > > +         possible tiers.
> >
> > IMHO we should not need a new kernel config. If tiering is not present
> > then there is just one tier on the system. And tiering is a kind of
> > hardware configuration, the information could be shown regardless of
> > whether demotion/promotion is supported/enabled or not.
>
> I think so too.  At least it appears unnecessary to let the user turn
> on/off it at configuration time.
>
> All the code should be enclosed by #if defined(CONFIG_NUMA) &&
> defined(CONIFIG_MIGRATION).  So we will not waste memory in small
> systems.

CONFIG_NUMA alone should be good enough. CONFIG_MIGRATION is enabled
by default if NUMA is enabled. And MIGRATION is just used to support
demotion/promotion. Memory tiers exist even though demotion/promotion
is not supported, right?

>
> Best Regards,
> Huang, Ying
>
> > > +
> > >  config HUGETLB_PAGE_SIZE_VARIABLE
> > >         def_bool n
> > >         help
> > > diff --git a/mm/Makefile b/mm/Makefile
> > > index 6f9ffa968a1a..482557fbc9d1 100644
> > > --- a/mm/Makefile
> > > +++ b/mm/Makefile
> > > @@ -92,6 +92,7 @@ obj-$(CONFIG_KFENCE) += kfence/
> > >  obj-$(CONFIG_FAILSLAB) += failslab.o
> > >  obj-$(CONFIG_MEMTEST)          += memtest.o
> > >  obj-$(CONFIG_MIGRATION) += migrate.o
> > > +obj-$(CONFIG_TIERED_MEMORY) += memory-tiers.o
> > >  obj-$(CONFIG_DEVICE_MIGRATION) += migrate_device.o
> > >  obj-$(CONFIG_TRANSPARENT_HUGEPAGE) += huge_memory.o khugepaged.o
> > >  obj-$(CONFIG_PAGE_COUNTER) += page_counter.o
> > > diff --git a/mm/memory-tiers.c b/mm/memory-tiers.c
> > > new file mode 100644
> > > index 000000000000..7de18d94a08d
> > > --- /dev/null
> > > +++ b/mm/memory-tiers.c
> > > @@ -0,0 +1,188 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +#include <linux/types.h>
> > > +#include <linux/device.h>
> > > +#include <linux/nodemask.h>
> > > +#include <linux/slab.h>
> > > +#include <linux/memory-tiers.h>
> > > +
> > > +struct memory_tier {
> > > +       struct list_head list;
> > > +       struct device dev;
> > > +       nodemask_t nodelist;
> > > +       int rank;
> > > +};
> > > +
> > > +#define to_memory_tier(device) container_of(device, struct memory_tier, dev)
> > > +
> > > +static struct bus_type memory_tier_subsys = {
> > > +       .name = "memtier",
> > > +       .dev_name = "memtier",
> > > +};
> > > +
> > > +static DEFINE_MUTEX(memory_tier_lock);
> > > +static LIST_HEAD(memory_tiers);
> > > +
> > > +
> > > +static ssize_t nodelist_show(struct device *dev,
> > > +                            struct device_attribute *attr, char *buf)
> > > +{
> > > +       struct memory_tier *memtier = to_memory_tier(dev);
> > > +
> > > +       return sysfs_emit(buf, "%*pbl\n",
> > > +                         nodemask_pr_args(&memtier->nodelist));
> > > +}
> > > +static DEVICE_ATTR_RO(nodelist);
> > > +
> > > +static ssize_t rank_show(struct device *dev,
> > > +                        struct device_attribute *attr, char *buf)
> > > +{
> > > +       struct memory_tier *memtier = to_memory_tier(dev);
> > > +
> > > +       return sysfs_emit(buf, "%d\n", memtier->rank);
> > > +}
> > > +static DEVICE_ATTR_RO(rank);
> > > +
> > > +static struct attribute *memory_tier_dev_attrs[] = {
> > > +       &dev_attr_nodelist.attr,
> > > +       &dev_attr_rank.attr,
> > > +       NULL
> > > +};
> > > +
> > > +static const struct attribute_group memory_tier_dev_group = {
> > > +       .attrs = memory_tier_dev_attrs,
> > > +};
> > > +
> > > +static const struct attribute_group *memory_tier_dev_groups[] = {
> > > +       &memory_tier_dev_group,
> > > +       NULL
> > > +};
> > > +
> > > +static void memory_tier_device_release(struct device *dev)
> > > +{
> > > +       struct memory_tier *tier = to_memory_tier(dev);
> > > +
> > > +       kfree(tier);
> > > +}
> > > +
> > > +/*
> > > + * Keep it simple by having  direct mapping between
> > > + * tier index and rank value.
> > > + */
> > > +static inline int get_rank_from_tier(unsigned int tier)
> > > +{
> > > +       switch (tier) {
> > > +       case MEMORY_TIER_HBM_GPU:
> > > +               return MEMORY_RANK_HBM_GPU;
> > > +       case MEMORY_TIER_DRAM:
> > > +               return MEMORY_RANK_DRAM;
> > > +       case MEMORY_TIER_PMEM:
> > > +               return MEMORY_RANK_PMEM;
> > > +       }
> > > +
> > > +       return 0;
> > > +}
> > > +
> > > +static void insert_memory_tier(struct memory_tier *memtier)
> > > +{
> > > +       struct list_head *ent;
> > > +       struct memory_tier *tmp_memtier;
> > > +
> > > +       list_for_each(ent, &memory_tiers) {
> > > +               tmp_memtier = list_entry(ent, struct memory_tier, list);
> > > +               if (tmp_memtier->rank < memtier->rank) {
> > > +                       list_add_tail(&memtier->list, ent);
> > > +                       return;
> > > +               }
> > > +       }
> > > +       list_add_tail(&memtier->list, &memory_tiers);
> > > +}
> > > +
> > > +static struct memory_tier *register_memory_tier(unsigned int tier)
> > > +{
> > > +       int error;
> > > +       struct memory_tier *memtier;
> > > +
> > > +       if (tier >= MAX_MEMORY_TIERS)
> > > +               return NULL;
> > > +
> > > +       memtier = kzalloc(sizeof(struct memory_tier), GFP_KERNEL);
> > > +       if (!memtier)
> > > +               return NULL;
> > > +
> > > +       memtier->dev.id = tier;
> > > +       memtier->rank = get_rank_from_tier(tier);
> > > +       memtier->dev.bus = &memory_tier_subsys;
> > > +       memtier->dev.release = memory_tier_device_release;
> > > +       memtier->dev.groups = memory_tier_dev_groups;
> > > +
> > > +       insert_memory_tier(memtier);
> > > +
> > > +       error = device_register(&memtier->dev);
> > > +       if (error) {
> > > +               list_del(&memtier->list);
> > > +               put_device(&memtier->dev);
> > > +               return NULL;
> > > +       }
> > > +       return memtier;
> > > +}
> > > +
> > > +__maybe_unused // temporay to prevent warnings during bisects
> > > +static void unregister_memory_tier(struct memory_tier *memtier)
> > > +{
> > > +       list_del(&memtier->list);
> > > +       device_unregister(&memtier->dev);
> > > +}
> > > +
> > > +static ssize_t
> > > +max_tier_show(struct device *dev, struct device_attribute *attr, char *buf)
> > > +{
> > > +       return sysfs_emit(buf, "%d\n", MAX_MEMORY_TIERS);
> > > +}
> > > +static DEVICE_ATTR_RO(max_tier);
> > > +
> > > +static ssize_t
> > > +default_tier_show(struct device *dev, struct device_attribute *attr, char *buf)
> > > +{
> > > +       return sysfs_emit(buf, "memtier%d\n", DEFAULT_MEMORY_TIER);
> > > +}
> > > +static DEVICE_ATTR_RO(default_tier);
> > > +
> > > +static struct attribute *memory_tier_attrs[] = {
> > > +       &dev_attr_max_tier.attr,
> > > +       &dev_attr_default_tier.attr,
> > > +       NULL
> > > +};
> > > +
> > > +static const struct attribute_group memory_tier_attr_group = {
> > > +       .attrs = memory_tier_attrs,
> > > +};
> > > +
> > > +static const struct attribute_group *memory_tier_attr_groups[] = {
> > > +       &memory_tier_attr_group,
> > > +       NULL,
> > > +};
> > > +
> > > +static int __init memory_tier_init(void)
> > > +{
> > > +       int ret;
> > > +       struct memory_tier *memtier;
> > > +
> > > +       ret = subsys_system_register(&memory_tier_subsys, memory_tier_attr_groups);
> > > +       if (ret)
> > > +               panic("%s() failed to register subsystem: %d\n", __func__, ret);
> > > +
> > > +       /*
> > > +        * Register only default memory tier to hide all empty
> > > +        * memory tier from sysfs.
> > > +        */
> > > +       memtier = register_memory_tier(DEFAULT_MEMORY_TIER);
> > > +       if (!memtier)
> > > +               panic("%s() failed to register memory tier: %d\n", __func__, ret);
> > > +
> > > +       /* CPU only nodes are not part of memory tiers. */
> > > +       memtier->nodelist = node_states[N_MEMORY];
> > > +
> > > +       return 0;
> > > +}
> > > +subsys_initcall(memory_tier_init);
> > > +
> > > --
> > > 2.36.1
> > >
>
>

Powered by blists - more mailing lists