linux-kernel - Re: [RFC PATCH 11/13] can: slcan: add ethtool support to reset adapter errors

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CABGWkvozX51zeQt16bdh+edsjwqST5A11qtfxYjTvP030DnToQ@mail.gmail.com>
Date:   Wed, 8 Jun 2022 18:33:08 +0200
From:   Dario Binacchi <dario.binacchi@...rulasolutions.com>
To:     Marc Kleine-Budde <mkl@...gutronix.de>
Cc:     linux-kernel@...r.kernel.org,
        Amarula patchwork <linux-amarula@...rulasolutions.com>,
        michael@...rulasolutions.com,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jakub Kicinski <kuba@...nel.org>,
        Jiri Slaby <jirislaby@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Sebastian Andrzej Siewior <bigeasy@...utronix.de>,
        Vincent Mailhol <mailhol.vincent@...adoo.fr>,
        Wolfgang Grandegger <wg@...ndegger.com>,
        linux-can@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: [RFC PATCH 11/13] can: slcan: add ethtool support to reset
 adapter errors

Hi Marc,

On Tue, Jun 7, 2022 at 12:52 PM Marc Kleine-Budde <mkl@...gutronix.de> wrote:
>
> On 07.06.2022 11:47:50, Dario Binacchi wrote:
> > This patch adds a private flag to the slcan driver to switch the
> > "err-rst-on-open" setting on and off.
> >
> > "err-rst-on-open" on  - Reset error states on opening command
> >
> > "err-rst-on-open" off - Don't reset error states on opening command
> >                         (default)
> >
> > The setting can only be changed if the interface is down:
> >
> >     ip link set dev can0 down
> >     ethtool --set-priv-flags can0 err-rst-on-open {off|on}
> >     ip link set dev can0 up
> >
> > Signed-off-by: Dario Binacchi <dario.binacchi@...rulasolutions.com>
>
> I'm a big fan of bringing the device into a well known good state during
> ifup. What would be the reasons/use cases to not reset the device?

Because by default either slcand and slcan_attach don't reset the error states,
but you must use the `-f' option to do so. So,  I followed this use case.

Thanks and regards,
Dario
>
> Marc
>
> --
> Pengutronix e.K.                 | Marc Kleine-Budde           |
> Embedded Linux                   | https://www.pengutronix.de  |
> Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
> Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |



-- 

Dario Binacchi

Embedded Linux Developer

dario.binacchi@...rulasolutions.com

__________________________________


Amarula Solutions SRL

Via Le Canevare 30, 31100 Treviso, Veneto, IT

T. +39 042 243 5310
info@...rulasolutions.com

www.amarulasolutions.com