| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220608180437.31971-3-william.zhang@broadcom.com>
Date: Wed, 8 Jun 2022 11:04:36 -0700
From: William Zhang <william.zhang@...adcom.com>
To: Linux ARM List <linux-arm-kernel@...ts.infradead.org>
Cc: samyon.furman@...adcom.com,
Broadcom Kernel List <bcm-kernel-feedback-list@...adcom.com>,
dan.beygelman@...adcom.com, tomer.yacoby@...adcom.com,
philippe.reynes@...tathome.com, kursad.oney@...adcom.com,
f.fainelli@...il.com, anand.gore@...adcom.com,
joel.peshkin@...adcom.com,
William Zhang <william.zhang@...adcom.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 2/3] arm64: dts: Add DTS files for bcmbca SoC BCM6856
Add DTS for ARMv8 based broadband SoC BCM6856. bcm6856.dtsi is the
SoC description DTS header and bcm96856.dts is a simple DTS file for
Broadcom BCM96956 Reference board that only enable the UART port.
Signed-off-by: William Zhang <william.zhang@...adcom.com>
---
arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +-
.../boot/dts/broadcom/bcmbca/bcm6856.dtsi | 103 ++++++++++++++++++
.../boot/dts/broadcom/bcmbca/bcm96856.dts | 30 +++++
3 files changed, 135 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
index 427299b8e63f..cee920bea124 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
@@ -2,4 +2,5 @@
dtb-$(CONFIG_ARCH_BCMBCA) += bcm963158.dtb \
bcm96858.dtb \
bcm94912.dtb \
- bcm963146.dtb
+ bcm963146.dtb \
+ bcm96856.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
new file mode 100644
index 000000000000..0bce6497219f
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "brcm,bcm6856", "brcm,bcmbca";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ B53_0: cpu@0 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ B53_1: cpu@1 {
+ compatible = "brcm,brahma-b53";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&B53_0>, <&B53_1>;
+ };
+
+ clocks: clocks {
+ periph_clk:periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi@...00000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x81000000 0x8000>;
+
+ gic: interrupt-controller@...0 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>, /* GICD */
+ <0x2000 0x2000>, /* GICC */
+ <0x4000 0x2000>, /* GICH */
+ <0x6000 0x2000>; /* GICV */
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+ };
+
+ bus@...00000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0xff800000 0x800000>;
+
+ uart0: serial@640 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x640 0x18>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
new file mode 100644
index 000000000000..032aeb75c983
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6856.dtsi"
+
+/ {
+ model = "Broadcom BCM96856 Reference Board";
+ compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--
2.36.1
Download attachment "smime.p7s" of type "application/pkcs7-signature" (4212 bytes)
Powered by blists - more mailing lists