lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220609112303.117928-7-angelogioacchino.delregno@collabora.com>
Date:   Thu,  9 Jun 2022 13:22:59 +0200
From:   AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>
To:     robh+dt@...nel.org
Cc:     krzysztof.kozlowski+dt@...aro.org, matthias.bgg@...il.com,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
        konrad.dybcio@...ainline.org, marijn.suijten@...ainline.org,
        martin.botka@...ainline.org, ~postmarketos/upstreaming@...ts.sr.ht,
        phone-devel@...r.kernel.org, paul.bouchara@...ainline.org,
        kernel@...labora.com,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>
Subject: [PATCH v2 06/10] arm64: dts: mediatek: mt6795: Remove incorrect fixed-clocks

Remove the RTC and UART fixed clocks, as these were introduced to
temporarily provide a dummy clock to devices: since the two 26M/32K
fixed oscillators clocks (which do really exist in the SoC) have
been added, there's no reason to keep the aforementioned (and now
redundant) dummies in this devicetree.

In order to remove the uart dummy clock, it was necessary to also
reassign the clock of all UART nodes to clk26m.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
---
 arch/arm64/boot/dts/mediatek/mt6795.dtsi | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
index 7123c1bf8d9e..b6f7681cc151 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -162,18 +162,6 @@ system_clk: dummy13m {
 		#clock-cells = <0>;
 	};
 
-	rtc_clk: dummy32k {
-		compatible = "fixed-clock";
-		clock-frequency = <32000>;
-		#clock-cells = <0>;
-	};
-
-	uart_clk: dummy26m {
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-		#clock-cells = <0>;
-	};
-
 	pmu {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI  8 IRQ_TYPE_LEVEL_LOW>,
@@ -235,7 +223,7 @@ uart0: serial@...02000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x400>;
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&clk26m>;
 			status = "disabled";
 		};
 
@@ -244,7 +232,7 @@ uart1: serial@...03000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x400>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&clk26m>;
 			status = "disabled";
 		};
 
@@ -253,7 +241,7 @@ uart2: serial@...04000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x400>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&clk26m>;
 			status = "disabled";
 		};
 
@@ -262,7 +250,7 @@ uart3: serial@...05000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11005000 0 0x400>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&clk26m>;
 			status = "disabled";
 		};
 	};
-- 
2.35.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ