[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220610175655.776153-4-colin.foster@in-advantage.com>
Date: Fri, 10 Jun 2022 10:56:51 -0700
From: Colin Foster <colin.foster@...advantage.com>
To: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-gpio@...r.kernel.org
Cc: Vladimir Oltean <vladimir.oltean@....com>,
Lee Jones <lee.jones@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Lars Povlsen <lars.povlsen@...rochip.com>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
UNGLinuxDriver@...rochip.com,
Linus Walleij <linus.walleij@...aro.org>,
Wolfram Sang <wsa@...nel.org>,
Terry Bowman <terry.bowman@....com>,
Andy Shevchenko <andy.shevchenko@...il.com>
Subject: [PATCH v9 net-next 3/7] pinctrl: ocelot: add ability to be used in a non-mmio configuration
There are a few Ocelot chips that contain pinctrl logic, but can be
controlled externally. Specifically the VSC7511, 7512, 7513 and 7514. In
the externally controlled configurations these registers are not
memory-mapped.
Add support for these non-memory-mapped configurations.
Signed-off-by: Colin Foster <colin.foster@...advantage.com>
---
drivers/pinctrl/pinctrl-ocelot.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index 5f4a8c5c6650..7ac12102120f 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -10,6 +10,7 @@
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/mfd/ocelot.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
@@ -1917,7 +1918,6 @@ static int ocelot_pinctrl_probe(struct platform_device *pdev)
struct ocelot_pinctrl *info;
struct reset_control *reset;
struct regmap *pincfg;
- void __iomem *base;
int ret;
struct regmap_config regmap_config = {
.reg_bits = 32,
@@ -1937,16 +1937,12 @@ static int ocelot_pinctrl_probe(struct platform_device *pdev)
"Failed to get reset\n");
reset_control_reset(reset);
- base = devm_ioremap_resource(dev,
- platform_get_resource(pdev, IORESOURCE_MEM, 0));
- if (IS_ERR(base))
- return PTR_ERR(base);
-
info->stride = 1 + (info->desc->npins - 1) / 32;
regmap_config.max_register = OCELOT_GPIO_SD_MAP * info->stride + 15 * 4;
- info->map = devm_regmap_init_mmio(dev, base, ®map_config);
+ ocelot_platform_init_regmap_from_resource(pdev, 0, &info->map, NULL,
+ ®map_config);
if (IS_ERR(info->map)) {
dev_err(dev, "Failed to create regmap\n");
return PTR_ERR(info->map);
--
2.25.1
Powered by blists - more mailing lists