linux-kernel - [PATCH v4 0/2] Add a property for setting minimum persentage of i2c clock high

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220610054722.32229-1-potin.lai.pt@gmail.com>
Date:   Fri, 10 Jun 2022 13:47:20 +0800
From:   Potin Lai <potin.lai.pt@...il.com>
To:     Brendan Higgins <brendanhiggins@...gle.com>,
        Benjamin Herrenschmidt <benh@...nel.crashing.org>,
        Joel Stanley <joel@....id.au>,
        Andrew Jeffery <andrew@...id.au>,
        Rob Herring <robh+dt@...nel.org>,
        Rayn Chen <rayn_chen@...eedtech.com>
Cc:     Patrick Williams <patrick@...cx.xyz>,
        Potin Lai <potin.lai@...ntatw.com>, linux-i2c@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
        Potin Lai <potin.lai.pt@...il.com>
Subject: [PATCH v4 0/2] Add a property for setting minimum persentage of i2c clock high

Introducing i2c-clk-high-min-percent property for setting minimum
persentage of clock high.

This driver will go through base clock divisor and calculate a set of
high/low clock with duty cycle applied. if driver could not find a suit
high/low clock set, then it will use default duty cycle (50%) recalculate.

LINK: [v1] https://lore.kernel.org/all/20220530114056.8722-1-potin.lai.pt@gmail.com/
LINK: [v2] https://lore.kernel.org/all/20220601041512.21484-1-potin.lai.pt@gmail.com/
LINK: [v3] https://lore.kernel.org/all/20220607163703.26355-1-potin.lai.pt@gmail.com/

changes v3 --> v4:
* rename property to i2c-clk-high-min-percent

changes v2 --> v3:
* discard the properties for manual setting, use duty cycle to calculate
  high/low clock.

changes v1 --> v2:
* update bt-bindings documentation
* use meaningful values for properties instead of acture value in register

Potin Lai (2):
  aspeed: i2c: add clock duty cycle property
  dt-bindings: aspeed-i2c: add properties for setting i2c clock duty
    cycle

 .../devicetree/bindings/i2c/aspeed,i2c.yaml   |  7 +++
 drivers/i2c/busses/i2c-aspeed.c               | 56 +++++++++++++++----
 2 files changed, 52 insertions(+), 11 deletions(-)

-- 
2.17.1