Message-ID: <20220610084444.14549-15-Sergey.Semin@baikalelectronics.ru>
Date:   Fri, 10 Jun 2022 11:44:42 +0300
From:   Serge Semin <Sergey.Semin@...kalelectronics.ru>
To:     Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Jingoo Han <jingoohan1@...il.com>,
        Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
        Krzysztof Wilczyński <kw@...ux.com>,
        Rahul Tanwar <rtanwar@...linear.com>
CC:     Serge Semin <Sergey.Semin@...kalelectronics.ru>,
        Serge Semin <fancer.lancer@...il.com>,
        Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
        Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>,
        Frank Li <Frank.Li@....com>,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
        Rob Herring <robh+dt@...nel.org>, <linux-pci@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v3 14/15] PCI: dwc: Check iATU in/outbound ranges setup methods status

Let's make the DWC PCIe RC/EP safer and more verbose for the invalid or
failed inbound and outbound iATU windows setups. Needless to say that
silently ignoring iATU regions setup errors may cause unpredictable
errors. For instance if for some reason a cfg or IO window fails to be
activated, then any CFG/IO requested won't reach target PCIe devices and
the corresponding accessors will return platform-specific random values.

First of all we need to convert dw_pcie_ep_outbound_atu() method to check
whether the specified outbound iATU range is successfully setup. That
method is called by the pci_epc_ops.map_addr callback. Thus we'll make the
EP-specific CPU->PCIe memory mappings saver.

Secondly since the iATU outbound range programming method now returns the
operation status, it will be handy to take that status into account in the
pci_ops.{map_bus,read,write} methods. Thus any failed mapping will be
immediately noticeable by the PCIe CFG operations requesters.

Finally we need to convert the dw_pcie_setup_rc() method to returning the
operation status, since the iATU outbound ranges setup procedure may now
fail. It will be especially handy in case if the DW PCIe RC DT-node has
invalid/unsupported (dma-)ranges property. Note since the suggested
modification causes having too wide code indentation, it is reasonable
from maintainability and readability points of view to move the outbound
ranges setup procedure in the separate function.

Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
Reviewed-by: Rob Herring <robh@...nel.org>
---
 .../pci/controller/dwc/pcie-designware-ep.c   |   9 +-
 .../pci/controller/dwc/pcie-designware-host.c | 153 ++++++++++++------
 drivers/pci/controller/dwc/pcie-designware.h  |   5 +-
 drivers/pci/controller/dwc/pcie-intel-gw.c    |   6 +-
 4 files changed, 114 insertions(+), 59 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 2e91222f7c98..627c4b69878c 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -184,8 +184,9 @@ static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no,
 				   phys_addr_t phys_addr,
 				   u64 pci_addr, size_t size)
 {
-	u32 free_win;
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	u32 free_win;
+	int ret;
 
 	free_win = find_first_zero_bit(ep->ob_window_map, pci->num_ob_windows);
 	if (free_win >= pci->num_ob_windows) {
@@ -193,8 +194,10 @@ static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no,
 		return -EINVAL;
 	}
 
-	dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win, PCIE_ATU_TYPE_MEM,
-				     phys_addr, pci_addr, size);
+	ret = dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win, PCIE_ATU_TYPE_MEM,
+					   phys_addr, pci_addr, size);
+	if (ret)
+		return ret;
 
 	set_bit(free_win, ep->ob_window_map);
 	ep->outbound_addr[free_win] = phys_addr;
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 7afd49c7da71..b52f7f4db191 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -411,7 +411,9 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
 
 	dw_pcie_iatu_detect(pci);
 
-	dw_pcie_setup_rc(pp);
+	ret = dw_pcie_setup_rc(pp);
+	if (ret)
+		goto err_free_msi;
 
 	if (!dw_pcie_link_up(pci)) {
 		ret = dw_pcie_start_link(pci);
@@ -465,10 +467,10 @@ EXPORT_SYMBOL_GPL(dw_pcie_host_deinit);
 static void __iomem *dw_pcie_other_conf_map_bus(struct pci_bus *bus,
 						unsigned int devfn, int where)
 {
-	int type;
-	u32 busdev;
 	struct dw_pcie_rp *pp = bus->sysdata;
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	int type, ret;
+	u32 busdev;
 
 	/*
 	 * Checking whether the link is up here is a last line of defense
@@ -489,8 +491,10 @@ static void __iomem *dw_pcie_other_conf_map_bus(struct pci_bus *bus,
 	else
 		type = PCIE_ATU_TYPE_CFG1;
 
-
-	dw_pcie_prog_outbound_atu(pci, 0, type, pp->cfg0_base, busdev, pp->cfg0_size);
+	ret = dw_pcie_prog_outbound_atu(pci, 0, type, pp->cfg0_base, busdev,
+					pp->cfg0_size);
+	if (ret)
+		return NULL;
 
 	return pp->va_cfg0_base + where;
 }
@@ -498,33 +502,45 @@ static void __iomem *dw_pcie_other_conf_map_bus(struct pci_bus *bus,
 static int dw_pcie_rd_other_conf(struct pci_bus *bus, unsigned int devfn,
 				 int where, int size, u32 *val)
 {
-	int ret;
 	struct dw_pcie_rp *pp = bus->sysdata;
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	int ret;
 
 	ret = pci_generic_config_read(bus, devfn, where, size, val);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		return ret;
 
-	if (!ret && pp->cfg0_io_shared)
-		dw_pcie_prog_outbound_atu(pci, 0, PCIE_ATU_TYPE_IO, pp->io_base,
-					  pp->io_bus_addr, pp->io_size);
+	if (pp->cfg0_io_shared) {
+		ret = dw_pcie_prog_outbound_atu(pci, 0, PCIE_ATU_TYPE_IO,
+						pp->io_base, pp->io_bus_addr,
+						pp->io_size);
+		if (ret)
+			return PCIBIOS_SET_FAILED;
+	}
 
-	return ret;
+	return PCIBIOS_SUCCESSFUL;
 }
 
 static int dw_pcie_wr_other_conf(struct pci_bus *bus, unsigned int devfn,
 				 int where, int size, u32 val)
 {
-	int ret;
 	struct dw_pcie_rp *pp = bus->sysdata;
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	int ret;
 
 	ret = pci_generic_config_write(bus, devfn, where, size, val);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		return ret;
 
-	if (!ret && pp->cfg0_io_shared)
-		dw_pcie_prog_outbound_atu(pci, 0, PCIE_ATU_TYPE_IO, pp->io_base,
-					  pp->io_bus_addr, pp->io_size);
+	if (pp->cfg0_io_shared) {
+		ret = dw_pcie_prog_outbound_atu(pci, 0, PCIE_ATU_TYPE_IO,
+						pp->io_base, pp->io_bus_addr,
+						pp->io_size);
+		if (ret)
+			return PCIBIOS_SET_FAILED;
+	}
 
-	return ret;
+	return PCIBIOS_SUCCESSFUL;
 }
 
 static struct pci_ops dw_child_pcie_ops = {
@@ -551,10 +567,72 @@ static struct pci_ops dw_pcie_ops = {
 	.write = pci_generic_config_write,
 };
 
-void dw_pcie_setup_rc(struct dw_pcie_rp *pp)
+static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct resource_entry *entry;
+	int i, ret;
+
+	/* Note the very first outbound ATU is used for CFG IOs */
+	if (!pci->num_ob_windows) {
+		dev_err(pci->dev, "No outbound iATU found\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Ensure all outbound windows are disabled before proceeding with
+	 * the MEM/IO ranges setups.
+	 */
+	for (i = 0; i < pci->num_ob_windows; i++)
+		dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_OB, i);
+
+	i = 0;
+	resource_list_for_each_entry(entry, &pp->bridge->windows) {
+		if (resource_type(entry->res) != IORESOURCE_MEM)
+			continue;
+
+		if (pci->num_ob_windows <= ++i)
+			break;
+
+		ret = dw_pcie_prog_outbound_atu(pci, i, PCIE_ATU_TYPE_MEM,
+						entry->res->start,
+						entry->res->start - entry->offset,
+						resource_size(entry->res));
+		if (ret) {
+			dev_err(pci->dev, "Failed to set MEM range %pr\n",
+				entry->res);
+			return ret;
+		}
+	}
+
+	if (pp->io_size) {
+		if (pci->num_ob_windows > ++i) {
+			ret = dw_pcie_prog_outbound_atu(pci, i, PCIE_ATU_TYPE_IO,
+							pp->io_base,
+							pp->io_bus_addr,
+							pp->io_size);
+			if (ret) {
+				dev_err(pci->dev, "Failed to set IO range %pr\n",
+					entry->res);
+				return ret;
+			}
+		} else {
+			pp->cfg0_io_shared = true;
+		}
+	}
+
+	if (pci->num_ob_windows <= i)
+		dev_warn(pci->dev, "Resources exceed number of ATU entries (%d)\n",
+			 pci->num_ob_windows);
+
+	return 0;
+}
+
+int dw_pcie_setup_rc(struct dw_pcie_rp *pp)
 {
-	u32 val, ctrl, num_ctrls;
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	u32 val, ctrl, num_ctrls;
+	int ret;
 
 	/*
 	 * Enable DBI read-only registers for writing/updating configuration.
@@ -609,42 +687,9 @@ void dw_pcie_setup_rc(struct dw_pcie_rp *pp)
 	 * ATU, so we should not program the ATU here.
 	 */
 	if (pp->bridge->child_ops == &dw_child_pcie_ops) {
-		int i, atu_idx = 0;
-		struct resource_entry *entry;
-
-		/*
-		 * Ensure all outbound windows are disabled so there are
-		 * multiple matches
-		 */
-		for (i = 0; i < pci->num_ob_windows; i++)
-			dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_OB, i);
-
-		/* Get last memory resource entry */
-		resource_list_for_each_entry(entry, &pp->bridge->windows) {
-			if (resource_type(entry->res) != IORESOURCE_MEM)
-				continue;
-
-			if (pci->num_ob_windows <= ++atu_idx)
-				break;
-
-			dw_pcie_prog_outbound_atu(pci, atu_idx,
-						  PCIE_ATU_TYPE_MEM, entry->res->start,
-						  entry->res->start - entry->offset,
-						  resource_size(entry->res));
-		}
-
-		if (pp->io_size) {
-			if (pci->num_ob_windows > ++atu_idx)
-				dw_pcie_prog_outbound_atu(pci, atu_idx,
-							  PCIE_ATU_TYPE_IO, pp->io_base,
-							  pp->io_bus_addr, pp->io_size);
-			else
-				pp->cfg0_io_shared = true;
-		}
-
-		if (pci->num_ob_windows <= atu_idx)
-			dev_warn(dev, "Resources exceed number of ATU entries (%d)\n",
-				 pci->num_ob_windows);
+		ret = dw_pcie_iatu_setup(pp);
+		if (ret)
+			return ret;
 	}
 
 	dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0);
@@ -657,5 +702,7 @@ void dw_pcie_setup_rc(struct dw_pcie_rp *pp)
 	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
 
 	dw_pcie_dbi_ro_wr_dis(pci);
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(dw_pcie_setup_rc);
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 60f1ddc54933..c3e73ed9aff5 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -387,7 +387,7 @@ static inline void dw_pcie_stop_link(struct dw_pcie *pci)
 
 #ifdef CONFIG_PCIE_DW_HOST
 irqreturn_t dw_handle_msi_irq(struct dw_pcie_rp *pp);
-void dw_pcie_setup_rc(struct dw_pcie_rp *pp);
+int dw_pcie_setup_rc(struct dw_pcie_rp *pp);
 int dw_pcie_host_init(struct dw_pcie_rp *pp);
 void dw_pcie_host_deinit(struct dw_pcie_rp *pp);
 int dw_pcie_allocate_domains(struct dw_pcie_rp *pp);
@@ -399,8 +399,9 @@ static inline irqreturn_t dw_handle_msi_irq(struct dw_pcie_rp *pp)
 	return IRQ_NONE;
 }
 
-static inline void dw_pcie_setup_rc(struct dw_pcie_rp *pp)
+static inline int dw_pcie_setup_rc(struct dw_pcie_rp *pp)
 {
+	return 0;
 }
 
 static inline int dw_pcie_host_init(struct dw_pcie_rp *pp)
diff --git a/drivers/pci/controller/dwc/pcie-intel-gw.c b/drivers/pci/controller/dwc/pcie-intel-gw.c
index a44f685ec94d..c3481200e86a 100644
--- a/drivers/pci/controller/dwc/pcie-intel-gw.c
+++ b/drivers/pci/controller/dwc/pcie-intel-gw.c
@@ -302,7 +302,11 @@ static int intel_pcie_host_setup(struct intel_pcie *pcie)
 	intel_pcie_ltssm_disable(pcie);
 	intel_pcie_link_setup(pcie);
 	intel_pcie_init_n_fts(pci);
-	dw_pcie_setup_rc(&pci->pp);
+
+	ret = dw_pcie_setup_rc(&pci->pp);
+	if (ret)
+		goto app_init_err;
+
 	dw_pcie_upconfig_setup(pci);
 
 	intel_pcie_device_rst_deassert(pcie);
-- 
2.35.1

Powered by blists - more mailing lists