lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220610091459.17612-20-Sergey.Semin@baikalelectronics.ru>
Date:   Fri, 10 Jun 2022 12:14:54 +0300
From:   Serge Semin <Sergey.Semin@...kalelectronics.ru>
To:     Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
        Vinod Koul <vkoul@...nel.org>, Rob Herring <robh@...nel.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Jingoo Han <jingoohan1@...il.com>, Frank Li <Frank.Li@....com>,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
CC:     Serge Semin <Sergey.Semin@...kalelectronics.ru>,
        Serge Semin <fancer.lancer@...il.com>,
        Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
        Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>,
        Krzysztof WilczyƄski <kw@...ux.com>,
        <linux-pci@...r.kernel.org>, <dmaengine@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH v3 19/24] dmaengine: dw-edma: Use non-atomic io-64 methods

Instead of splitting the 64-bits IOs up into two 32-bits ones it's
possible to use an available set of the non-atomic readq/writeq methods
implemented exactly for such cases. They are defined in the dedicated
header files io-64-nonatomic-lo-hi.h/io-64-nonatomic-hi-lo.h. So in case
if the 64-bits readq/writeq methods are unavailable on some platforms at
consideration, the corresponding drivers can have any of these headers
included and stop locally re-implementing the 64-bits IO accessors taking
into account the non-atomic nature of the included methods. Let's do that
in the DW eDMA driver too. Note by doing so we can discard the
CONFIG_64BIT config ifdefs from the code. Also note that if a platform
doesn't support 64-bit DBI IOs then the corresponding accessors will just
directly call the lo_hi_readq()/lo_hi_writeq() methods.

Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
 drivers/dma/dw-edma/dw-edma-v0-core.c | 71 +++++++++------------------
 1 file changed, 24 insertions(+), 47 deletions(-)

diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c
index e6d611176891..4348d2323125 100644
--- a/drivers/dma/dw-edma/dw-edma-v0-core.c
+++ b/drivers/dma/dw-edma/dw-edma-v0-core.c
@@ -8,6 +8,8 @@
 
 #include <linux/bitfield.h>
 
+#include <linux/io-64-nonatomic-lo-hi.h>
+
 #include "dw-edma-core.h"
 #include "dw-edma-v0-core.h"
 #include "dw-edma-v0-regs.h"
@@ -53,8 +55,6 @@ static inline struct dw_edma_v0_regs __iomem *__dw_regs(struct dw_edma *dw)
 		SET_32(dw, rd_##name, value);		\
 	} while (0)
 
-#ifdef CONFIG_64BIT
-
 #define SET_64(dw, name, value)				\
 	writeq(value, &(__dw_regs(dw)->name))
 
@@ -80,8 +80,6 @@ static inline struct dw_edma_v0_regs __iomem *__dw_regs(struct dw_edma *dw)
 		SET_64(dw, rd_##name, value);		\
 	} while (0)
 
-#endif /* CONFIG_64BIT */
-
 #define SET_COMPAT(dw, name, value)			\
 	writel(value, &(__dw_regs(dw)->type.unroll.name))
 
@@ -164,14 +162,13 @@ static inline u32 readl_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
 #define SET_LL_32(ll, value) \
 	writel(value, ll)
 
-#ifdef CONFIG_64BIT
-
 static inline void writeq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
 			     u64 value, void __iomem *addr)
 {
+	unsigned long flags;
+
 	if (dw->chip->mf == EDMA_MF_EDMA_LEGACY) {
 		u32 viewport_sel;
-		unsigned long flags;
 
 		raw_spin_lock_irqsave(&dw->lock, flags);
 
@@ -181,22 +178,25 @@ static inline void writeq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
 
 		writel(viewport_sel,
 		       &(__dw_regs(dw)->type.legacy.viewport_sel));
+	}
+
+	if (dw->chip->flags & DW_EDMA_CHIP_32BIT_DBI)
+		lo_hi_writeq(value, addr);
+	else
 		writeq(value, addr);
 
+	if (dw->chip->mf == EDMA_MF_EDMA_LEGACY)
 		raw_spin_unlock_irqrestore(&dw->lock, flags);
-	} else {
-		writeq(value, addr);
-	}
 }
 
 static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
 			   const void __iomem *addr)
 {
-	u32 value;
+	unsigned long flags;
+	u64 value;
 
 	if (dw->chip->mf == EDMA_MF_EDMA_LEGACY) {
 		u32 viewport_sel;
-		unsigned long flags;
 
 		raw_spin_lock_irqsave(&dw->lock, flags);
 
@@ -206,12 +206,15 @@ static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
 
 		writel(viewport_sel,
 		       &(__dw_regs(dw)->type.legacy.viewport_sel));
+	}
+
+	if (dw->chip->flags & DW_EDMA_CHIP_32BIT_DBI)
+		value = lo_hi_readq(addr);
+	else
 		value = readq(addr);
 
+	if (dw->chip->mf == EDMA_MF_EDMA_LEGACY)
 		raw_spin_unlock_irqrestore(&dw->lock, flags);
-	} else {
-		value = readq(addr);
-	}
 
 	return value;
 }
@@ -225,8 +228,6 @@ static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
 #define SET_LL_64(ll, value) \
 	writeq(value, ll)
 
-#endif /* CONFIG_64BIT */
-
 /* eDMA management callbacks */
 void dw_edma_v0_core_off(struct dw_edma *dw)
 {
@@ -325,19 +326,10 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
 		/* Transfer size */
 		SET_LL_32(&lli[i].transfer_size, child->sz);
 		/* SAR */
-		#ifdef CONFIG_64BIT
-			SET_LL_64(&lli[i].sar.reg, child->sar);
-		#else /* CONFIG_64BIT */
-			SET_LL_32(&lli[i].sar.lsb, lower_32_bits(child->sar));
-			SET_LL_32(&lli[i].sar.msb, upper_32_bits(child->sar));
-		#endif /* CONFIG_64BIT */
+		SET_LL_64(&lli[i].sar.reg, child->sar);
 		/* DAR */
-		#ifdef CONFIG_64BIT
-			SET_LL_64(&lli[i].dar.reg, child->dar);
-		#else /* CONFIG_64BIT */
-			SET_LL_32(&lli[i].dar.lsb, lower_32_bits(child->dar));
-			SET_LL_32(&lli[i].dar.msb, upper_32_bits(child->dar));
-		#endif /* CONFIG_64BIT */
+		SET_LL_64(&lli[i].dar.reg, child->dar);
+
 		i++;
 	}
 
@@ -349,12 +341,7 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
 	/* Channel control */
 	SET_LL_32(&llp->control, control);
 	/* Linked list */
-	#ifdef CONFIG_64BIT
-		SET_LL_64(&llp->llp.reg, chunk->ll_region.paddr);
-	#else /* CONFIG_64BIT */
-		SET_LL_32(&llp->llp.lsb, lower_32_bits(chunk->ll_region.paddr));
-		SET_LL_32(&llp->llp.msb, upper_32_bits(chunk->ll_region.paddr));
-	#endif /* CONFIG_64BIT */
+	SET_LL_64(&llp->llp.reg, chunk->ll_region.paddr);
 }
 
 void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
@@ -417,18 +404,8 @@ void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
 		SET_CH_32(dw, chan->dir, chan->id, ch_control1,
 			  (DW_EDMA_V0_CCS | DW_EDMA_V0_LLE));
 		/* Linked list */
-		if ((chan->dw->chip->flags & DW_EDMA_CHIP_32BIT_DBI) ||
-		    !IS_ENABLED(CONFIG_64BIT)) {
-			SET_CH_32(dw, chan->dir, chan->id, llp.lsb,
-				  lower_32_bits(chunk->ll_region.paddr));
-			SET_CH_32(dw, chan->dir, chan->id, llp.msb,
-				  upper_32_bits(chunk->ll_region.paddr));
-		} else {
-		#ifdef CONFIG_64BIT
-			SET_CH_64(dw, chan->dir, chan->id, llp.reg,
-				  chunk->ll_region.paddr);
-		#endif
-		}
+		SET_CH_64(dw, chan->dir, chan->id, llp.reg,
+			  chunk->ll_region.paddr);
 	}
 	/* Doorbell */
 	SET_RW_32(dw, chan->dir, doorbell,
-- 
2.35.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ