[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220610132627.GO1615@pengutronix.de>
Date: Fri, 10 Jun 2022 15:26:27 +0200
From: "s.hauer@...gutronix.de" <s.hauer@...gutronix.de>
To: Ping-Ke Shih <pkshih@...ltek.com>
Cc: "johannes@...solutions.net" <johannes@...solutions.net>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"neojou@...il.com" <neojou@...il.com>,
"kvalo@...nel.org" <kvalo@...nel.org>,
"tony0620emma@...il.com" <tony0620emma@...il.com>,
"linux-wireless@...r.kernel.org" <linux-wireless@...r.kernel.org>,
"martin.blumenstingl@...glemail.com"
<martin.blumenstingl@...glemail.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux@...i-kroll.de" <linux@...i-kroll.de>
Subject: Re: [PATCH v2 10/10] rtw88: disable powersave modes for USB devices
On Thu, Jun 09, 2022 at 12:51:49PM +0000, Ping-Ke Shih wrote:
> On Tue, 2022-05-31 at 09:42 +0200, s.hauer@...gutronix.de wrote:
> > On Tue, May 31, 2022 at 01:07:36AM +0000, Ping-Ke Shih wrote:
> > > On Mon, 2022-05-30 at 15:54 +0200, Sascha Hauer wrote:
> > > > The powersave modes do not work with USB devices (tested with a
> > > > RTW8822CU) properly. With powersave modes enabled the driver issues
> > > > messages like:
> > > >
> > > > rtw_8822cu 1-1:1.2: firmware failed to leave lps state
> > > > rtw_8822cu 1-1:1.2: timed out to flush queue 3
> > >
> > > Could you try module parameter rtw_disable_lps_deep_mode=1 to see
> > > if it can work?
> >
> > No, this module parameter doesn't seem to make any difference.
> >
> > # cat /sys/module/rtw88_core/parameters/disable_lps_deep
> > Y
> >
> > Still "firmware failed to leave lps state" and poor performance.
> >
> > Any other ideas what may go wrong here?
> >
>
> Today, I borrow a 8822cu, and use your patchset but revert
> patch 10/10 to reproduce this issue. With firmware 7.3.0,
> it looks bad. After checking something about firmware, I
> found the firmware is old, so upgrade to 9.9.11, and then
> it works well for 10 minutes, no abnormal messages.
I originally used firmware 5.0.0. Then I have tried 9.9.6 I have lying
around here from my distro. That version behaves like the old 5.0.0
version. Finally I switched to 9.9.11 from current linux-firmware
repository. That doesn't work at all for me unfortunately:
[ 221.076279] rtw_8822cu 2-1:1.2: Firmware version 9.9.11, H2C version 15
[ 221.078405] rtw_8822cu 2-1:1.2: Firmware version 9.9.4, H2C version 15
[ 239.783261] wlan0: authenticate with 76:83:c2:ce:83:0b
[ 242.398435] wlan0: send auth to 76:83:c2:ce:83:0b (try 1/3)
[ 242.402992] wlan0: authenticated
[ 242.420735] wlan0: associate with 76:83:c2:ce:83:0b (try 1/3)
[ 242.437094] wlan0: RX AssocResp from 76:83:c2:ce:83:0b (capab=0x1411 status=0 aid=4)
[ 242.485521] wlan0: associated
[ 242.564847] wlan0: Connection to AP 76:83:c2:ce:83:0b lost
[ 244.577617] wlan0: authenticate with 76:83:c2:cd:83:0b
[ 244.578257] wlan0: bad VHT capabilities, disabling VHT
[ 246.866182] wlan0: send auth to 76:83:c2:cd:83:0b (try 1/3)
[ 246.871830] wlan0: authenticated
[ 246.892754] wlan0: associate with 76:83:c2:cd:83:0b (try 1/3)
[ 246.911045] wlan0: RX AssocResp from 76:83:c2:cd:83:0b (capab=0x1431 status=0 aid=3)
[ 246.940608] wlan0: associated
[ 247.152308] wlan0: Connection to AP 76:83:c2:cd:83:0b lost
[ 248.912821] wlan0: Connection to AP 00:00:00:00:00:00 lost
[ 249.105517] wlan0: authenticate with 76:83:c2:ce:83:0b
[ 251.482183] wlan0: send auth to 76:83:c2:ce:83:0b (try 1/3)
[ 251.486765] wlan0: authenticated
[ 251.508731] wlan0: associate with 76:83:c2:ce:83:0b (try 1/3)
[ 251.521904] wlan0: RX AssocResp from 76:83:c2:ce:83:0b (capab=0x1411 status=0 aid=4)
[ 251.565233] wlan0: associated
[ 251.720602] wlan0: Connection to AP 76:83:c2:ce:83:0b lost
[ 253.527904] wlan0: Connection to AP 00:00:00:00:00:00 lost
[ 253.728243] wlan0: authenticate with 76:83:c2:cd:83:0b
[ 253.728921] wlan0: bad VHT capabilities, disabling VHT
[ 256.014184] wlan0: send auth to 76:83:c2:cd:83:0b (try 1/3)
[ 256.019608] wlan0: authenticated
[ 256.044702] wlan0: associate with 76:83:c2:cd:83:0b (try 1/3)
[ 256.062049] wlan0: RX AssocResp from 76:83:c2:cd:83:0b (capab=0x1431 status=0 aid=3)
[ 256.093117] wlan0: associated
[ 256.169071] wlan0: Connection to AP 76:83:c2:cd:83:0b lost
[ 258.145286] wlan0: authenticate with 76:83:c2:ce:83:0b
[ 260.626182] wlan0: send auth to 76:83:c2:ce:83:0b (try 1/3)
[ 260.630495] wlan0: authenticated
[ 260.652783] wlan0: associate with 76:83:c2:ce:83:0b (try 1/3)
[ 260.666201] wlan0: RX AssocResp from 76:83:c2:ce:83:0b (capab=0x1411 status=0 aid=4)
[ 260.708596] wlan0: associated
[ 260.769613] wlan0: Connection to AP 76:83:c2:ce:83:0b lost
[ 262.770668] wlan0: authenticate with 76:83:c2:cd:83:0b
[ 262.771272] wlan0: bad VHT capabilities, disabling VHT
[ 265.158184] wlan0: send auth to 76:83:c2:cd:83:0b (try 1/3)
This goes on forever. I finally tried 9.9.10 and 9.9.9, they also behave
like 9.9.11.
No luck today :(
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists