lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220611102656.10954-4-yf.wang@mediatek.com>
Date:   Sat, 11 Jun 2022 18:26:55 +0800
From:   <yf.wang@...iatek.com>
To:     Yong Wu <yong.wu@...iatek.com>, Joerg Roedel <joro@...tes.org>,
        "Will Deacon" <will@...nel.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        "open list:MEDIATEK IOMMU DRIVER" <iommu@...ts.linux-foundation.org>,
        "moderated list:MEDIATEK IOMMU DRIVER" 
        <linux-mediatek@...ts.infradead.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-arm-kernel@...ts.infradead.org>,
        "open list" <linux-kernel@...r.kernel.org>
CC:     <wsd_upstream@...iatek.com>, Libo Kang <Libo.Kang@...iatek.com>,
        Yong Wu <Yong.Wu@...iatek.com>,
        Miles Chen <miles.chen@...iatek.com>,
        Yunfei Wang <yf.wang@...iatek.com>,
        Ning Li <ning.li@...iatek.com>
Subject: [PATCH v8 3/3] iommu/mediatek: Allow page table PA up to 35bit

From: Yunfei Wang <yf.wang@...iatek.com>

Single memory zone feature will remove ZONE_DMA32 and ZONE_DMA. So add
the quirk IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT to let level 1 and level 2
pgtable support at most 35bit PA.

Signed-off-by: Ning Li <ning.li@...iatek.com>
Signed-off-by: Yunfei Wang <yf.wang@...iatek.com>
---
 drivers/iommu/mtk_iommu.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 3d62399e8865..4dbc33758711 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -138,6 +138,7 @@
 /* PM and clock always on. e.g. infra iommu */
 #define PM_CLK_AO			BIT(15)
 #define IFA_IOMMU_PCIE_SUPPORT		BIT(16)
+#define PGTABLE_PA_35_EN		BIT(17)
 
 #define MTK_IOMMU_HAS_FLAG_MASK(pdata, _x, mask)	\
 				((((pdata)->flags) & (mask)) == (_x))
@@ -240,6 +241,7 @@ struct mtk_iommu_data {
 struct mtk_iommu_domain {
 	struct io_pgtable_cfg		cfg;
 	struct io_pgtable_ops		*iop;
+	u32				ttbr;
 
 	struct mtk_iommu_bank_data	*bank;
 	struct iommu_domain		domain;
@@ -596,6 +598,9 @@ static int mtk_iommu_domain_finalise(struct mtk_iommu_domain *dom,
 		.iommu_dev = data->dev,
 	};
 
+	if (MTK_IOMMU_HAS_FLAG(data->plat_data, PGTABLE_PA_35_EN))
+		dom->cfg.quirks |= IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT;
+
 	if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_4GB_MODE))
 		dom->cfg.oas = data->enable_4GB ? 33 : 32;
 	else
@@ -684,8 +689,8 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
 			goto err_unlock;
 		}
 		bank->m4u_dom = dom;
-		writel(dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK,
-		       bank->base + REG_MMU_PT_BASE_ADDR);
+		bank->m4u_dom->ttbr = MTK_IOMMU_ADDR(dom->cfg.arm_v7s_cfg.ttbr);
+		writel(bank->m4u_dom->ttbr, data->base + REG_MMU_PT_BASE_ADDR);
 
 		pm_runtime_put(m4udev);
 	}
@@ -1366,8 +1371,7 @@ static int __maybe_unused mtk_iommu_runtime_resume(struct device *dev)
 		writel_relaxed(reg->int_control[i], base + REG_MMU_INT_CONTROL0);
 		writel_relaxed(reg->int_main_control[i], base + REG_MMU_INT_MAIN_CONTROL);
 		writel_relaxed(reg->ivrp_paddr[i], base + REG_MMU_IVRP_PADDR);
-		writel(m4u_dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK,
-		       base + REG_MMU_PT_BASE_ADDR);
+		writel(m4u_dom->ttbr, base + REG_MMU_PT_BASE_ADDR);
 	} while (++i < data->plat_data->banks_num);
 
 	/*
@@ -1401,7 +1405,7 @@ static const struct mtk_iommu_plat_data mt2712_data = {
 static const struct mtk_iommu_plat_data mt6779_data = {
 	.m4u_plat      = M4U_MT6779,
 	.flags         = HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN | WR_THROT_EN |
-			 MTK_IOMMU_TYPE_MM,
+			 MTK_IOMMU_TYPE_MM | PGTABLE_PA_35_EN,
 	.inv_sel_reg   = REG_MMU_INV_SEL_GEN2,
 	.banks_num    = 1,
 	.banks_enable = {true},
-- 
2.18.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ