[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4178848.3VsfAaAtOV@phil>
Date: Sat, 11 Jun 2022 15:50:08 +0200
From: Heiko Stuebner <heiko@...ech.de>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Michael Riesch <michael.riesch@...fvision.net>,
Peter Geis <pgwipeout@...il.com>
Cc: devicetree <devicetree@...r.kernel.org>,
arm-mail-list <linux-arm-kernel@...ts.infradead.org>,
"open list:ARM/Rockchip SoC..." <linux-rockchip@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] arm64: dts: rockchip: Fix SoQuartz CM4IO usb
Am Freitag, 10. Juni 2022, 16:44:23 CEST schrieb Peter Geis:
> On Fri, Jun 10, 2022 at 9:26 AM Peter Geis <pgwipeout@...il.com> wrote:
> >
> > The SoQuartz CM4-IO should support otg mode, however it currently
> > defaults to device mode when otg is enabled. Force it to host mode to
> > retain the previous behavior.
>
> It would seem the role-switch issue is more widespread than originally
> thought, affecting other boards where automatic control should work.
> Please hold this patch while I investigate further.
ok!
I guess this also applies to
"arm64: dts: rockchip: Fix Quartz64-A dwc3 otg port behavior"?
Heiko
> >
> > Fixes: bc405bb3eeee ("arm64: dts: rockchip: enable otg/drd operation of usb_host0_xhci in rk356x")
> >
> > Signed-off-by: Peter Geis <pgwipeout@...il.com>
> > ---
> > arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
> > index e00568a6be5c..56764fae9f9d 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
> > +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
> > @@ -169,6 +169,7 @@ &usb2phy0_otg {
> > };
> >
> > &usb_host0_xhci {
> > + dr_mode = "host";
> > status = "okay";
> > };
> >
> > --
> > 2.25.1
> >
>
Powered by blists - more mailing lists