[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220612145955.385787-1-nikita@trvn.ru>
Date: Sun, 12 Jun 2022 19:59:51 +0500
From: Nikita Travkin <nikita@...n.ru>
To: mturquette@...libre.com, sboyd@...nel.org, linus.walleij@...aro.org
Cc: bjorn.andersson@...aro.org, agross@...nel.org, tdas@...eaurora.org,
joonwoop@...eaurora.org, svarbanov@...sol.com,
linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht,
Nikita Travkin <nikita@...n.ru>
Subject: [PATCH v2 0/4] Prepare general purpose clocks on msm8916
Some devices make use of general purpose clocks as PWM outputs by
controlling their duty cycle.
Notably, many devices (e.g. Samsung A3/A5, LG G Watch R and probably
many others) use clock based PWM to control the haptic feedback,
some other can control backlight or flash/torch LED brightness.
As a follow-up to a proposed clock based PWM output driver [1],
this series contains various fixes to make it useful on msm8916
based devices.
[1] - https://lore.kernel.org/lkml/20220612132203.290726-1-nikita@trvn.ru/T/#t
Changes since v1:
- Use clamp() instead of two boundary checks
Nikita Travkin (4):
clk: qcom: clk-rcg2: Fail Duty-Cycle configuration if MND divider is
not enabled.
clk: qcom: clk-rcg2: Make sure to not write d=0 to the NMD register
pinctrl: qcom: msm8916: Allow CAMSS GP clocks to be muxed
clk: qcom: gcc-msm8916: Add rates to the GP clocks
drivers/clk/qcom/clk-rcg2.c | 16 +++++++++---
drivers/clk/qcom/gcc-msm8916.c | 35 ++++++++++++++++++++++++++
drivers/pinctrl/qcom/pinctrl-msm8916.c | 4 +--
3 files changed, 49 insertions(+), 6 deletions(-)
--
2.35.3
Powered by blists - more mailing lists