[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220613094926.948237482@linuxfoundation.org>
Date: Mon, 13 Jun 2022 12:09:20 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Erwan Le Ray <erwan.leray@...com>,
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.17 066/298] serial: stm32-usart: Correct CSIZE, bits, and parity
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
[ Upstream commit 1deeda8d2877c18bc2b9eeee10dd6d2628852848 ]
Add CSIZE sanitization for unsupported CSIZE configurations. In
addition, if parity is asked for but CSx was unsupported, the sensible
result is CS8+parity which requires setting USART_CR1_M0 like with 9
bits.
Incorrect CSIZE results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Fixes: c8a9d043947b (serial: stm32: fix word length configuration)
Cc: Erwan Le Ray <erwan.leray@...com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/tty/serial/stm32-usart.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 9570002d07e7..9bc970be59ba 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1037,13 +1037,22 @@ static void stm32_usart_set_termios(struct uart_port *port,
* CS8 or (CS7 + parity), 8 bits word aka [M1:M0] = 0b00
* M0 and M1 already cleared by cr1 initialization.
*/
- if (bits == 9)
+ if (bits == 9) {
cr1 |= USART_CR1_M0;
- else if ((bits == 7) && cfg->has_7bits_data)
+ } else if ((bits == 7) && cfg->has_7bits_data) {
cr1 |= USART_CR1_M1;
- else if (bits != 8)
+ } else if (bits != 8) {
dev_dbg(port->dev, "Unsupported data bits config: %u bits\n"
, bits);
+ cflag &= ~CSIZE;
+ cflag |= CS8;
+ termios->c_cflag = cflag;
+ bits = 8;
+ if (cflag & PARENB) {
+ bits++;
+ cr1 |= USART_CR1_M0;
+ }
+ }
if (ofs->rtor != UNDEF_REG && (stm32_port->rx_ch ||
(stm32_port->fifoen &&
--
2.35.1
Powered by blists - more mailing lists