lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 13 Jun 2022 12:08:53 +0200 From: Greg Kroah-Hartman <gregkh@...uxfoundation.org> To: linux-kernel@...r.kernel.org Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>, stable@...r.kernel.org, "Maciej W. Rozycki" <macro@...am.me.uk>, Sasha Levin <sashal@...nel.org> Subject: [PATCH 5.17 039/298] serial: sifive: Report actual baud base rather than fixed 115200 From: Maciej W. Rozycki <macro@...am.me.uk> [ Upstream commit 0a7ff843d507ce2cca2c3b7e169ee56e28133530 ] The base baud value reported is supposed to be the highest baud rate that can be set for a serial port. The SiFive FU740-C000 SOC's on-chip UART supports baud rates of up to 1/16 of the input clock rate, which is the bus clock `tlclk'[1], often at 130MHz in the case of the HiFive Unmatched board. However the sifive UART driver reports a fixed value of 115200 instead: 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 1, base_baud = 115200) is a SiFive UART v0 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 2, base_baud = 115200) is a SiFive UART v0 even though we already support setting higher baud rates, e.g.: $ tty /dev/ttySIF1 $ stty speed 230400 The baud base value is computed by the serial core by dividing the UART clock recorded in `struct uart_port' by 16, which is also the minimum value of the clock divider supported, so correct the baud base value reported by setting the UART clock recorded to the input clock rate rather than 115200: 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 1, base_baud = 8125000) is a SiFive UART v0 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 2, base_baud = 8125000) is a SiFive UART v0 [1] "SiFive FU740-C000 Manual", v1p3, SiFive, Inc., August 13, 2021, Section 16.9 "Baud Rate Divisor Register (div)", pp.143-144 Signed-off-by: Maciej W. Rozycki <macro@...am.me.uk> Fixes: 1f1496a923b6 ("riscv: Fix sifive serial driver") Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204291656280.9383@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org> Signed-off-by: Sasha Levin <sashal@...nel.org> --- drivers/tty/serial/sifive.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index b79900d0e91a..fff0b7916f3d 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -998,7 +998,7 @@ static int sifive_serial_probe(struct platform_device *pdev) /* Set up clock divider */ ssp->clkin_rate = clk_get_rate(ssp->clk); ssp->baud_rate = SIFIVE_DEFAULT_BAUD_RATE; - ssp->port.uartclk = ssp->baud_rate * 16; + ssp->port.uartclk = ssp->clkin_rate; __ssp_update_div(ssp); platform_set_drvdata(pdev, ssp); -- 2.35.1
Powered by blists - more mailing lists