[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220613094932.546549310@linuxfoundation.org>
Date: Mon, 13 Jun 2022 12:12:20 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Cyril Brulebois <kibi@...ian.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.17 246/298] Revert "PCI: brcmstb: Add mechanism to turn on subdev regulators"
From: Bjorn Helgaas <bhelgaas@...gle.com>
[ Upstream commit 420be2f7ebe60c9ba3e332f5290017cd168e2bf8 ]
This reverts commit 67211aadcb4b968d0fdc57bc27240fa71500c2d4.
This is part of a revert of the following commits:
11ed8b8624b8 ("PCI: brcmstb: Do not turn off WOL regulators on suspend")
93e41f3fca3d ("PCI: brcmstb: Add control of subdevice voltage regulators")
67211aadcb4b ("PCI: brcmstb: Add mechanism to turn on subdev regulators")
830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs")
Cyril reported that 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup()
into two funcs"), which appeared in v5.17-rc1, broke booting on the
Raspberry Pi Compute Module 4. Apparently 830aa6f29f07 panics with an
Asynchronous SError Interrupt, and after further commits here is a black
screen on HDMI and no output on the serial console.
This does not seem to affect the Raspberry Pi 4 B.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925
Link: https://lore.kernel.org/r/20220511201856.808690-4-helgaas@kernel.org
Reported-by: Cyril Brulebois <kibi@...ian.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/pci/controller/pcie-brcmstb.c | 76 ---------------------------
1 file changed, 76 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index fd464d38fecb..0e8346114a8d 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -24,7 +24,6 @@
#include <linux/pci.h>
#include <linux/pci-ecam.h>
#include <linux/printk.h>
-#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/sizes.h>
#include <linux/slab.h>
@@ -284,14 +283,6 @@ static const struct pcie_cfg_data bcm2711_cfg = {
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
};
-struct subdev_regulators {
- unsigned int num_supplies;
- struct regulator_bulk_data supplies[];
-};
-
-static int pci_subdev_regulators_add_bus(struct pci_bus *bus);
-static void pci_subdev_regulators_remove_bus(struct pci_bus *bus);
-
struct brcm_msi {
struct device *dev;
void __iomem *base;
@@ -445,71 +436,6 @@ static int brcm_pcie_set_ssc(struct brcm_pcie *pcie)
return ssc && pll ? 0 : -EIO;
}
-static void *alloc_subdev_regulators(struct device *dev)
-{
- static const char * const supplies[] = {
- "vpcie3v3",
- "vpcie3v3aux",
- "vpcie12v",
- };
- const size_t size = sizeof(struct subdev_regulators)
- + sizeof(struct regulator_bulk_data) * ARRAY_SIZE(supplies);
- struct subdev_regulators *sr;
- int i;
-
- sr = devm_kzalloc(dev, size, GFP_KERNEL);
- if (sr) {
- sr->num_supplies = ARRAY_SIZE(supplies);
- for (i = 0; i < ARRAY_SIZE(supplies); i++)
- sr->supplies[i].supply = supplies[i];
- }
-
- return sr;
-}
-
-static int pci_subdev_regulators_add_bus(struct pci_bus *bus)
-{
- struct device *dev = &bus->dev;
- struct subdev_regulators *sr;
- int ret;
-
- if (!dev->of_node || !bus->parent || !pci_is_root_bus(bus->parent))
- return 0;
-
- if (dev->driver_data)
- dev_err(dev, "dev.driver_data unexpectedly non-NULL\n");
-
- sr = alloc_subdev_regulators(dev);
- if (!sr)
- return -ENOMEM;
-
- dev->driver_data = sr;
- ret = regulator_bulk_get(dev, sr->num_supplies, sr->supplies);
- if (ret)
- return ret;
-
- ret = regulator_bulk_enable(sr->num_supplies, sr->supplies);
- if (ret) {
- dev_err(dev, "failed to enable regulators for downstream device\n");
- return ret;
- }
-
- return 0;
-}
-
-static void pci_subdev_regulators_remove_bus(struct pci_bus *bus)
-{
- struct device *dev = &bus->dev;
- struct subdev_regulators *sr = dev->driver_data;
-
- if (!sr || !bus->parent || !pci_is_root_bus(bus->parent))
- return;
-
- if (regulator_bulk_disable(sr->num_supplies, sr->supplies))
- dev_err(dev, "failed to disable regulators for downstream device\n");
- dev->driver_data = NULL;
-}
-
/* Limits operation to a specific generation (1, 2, or 3) */
static void brcm_pcie_set_gen(struct brcm_pcie *pcie, int gen)
{
@@ -853,8 +779,6 @@ static struct pci_ops brcm_pcie_ops = {
.map_bus = brcm_pcie_map_conf,
.read = pci_generic_config_read,
.write = pci_generic_config_write,
- .add_bus = pci_subdev_regulators_add_bus,
- .remove_bus = pci_subdev_regulators_remove_bus,
};
static struct pci_ops brcm_pcie_ops32 = {
--
2.35.1
Powered by blists - more mailing lists