| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <19afcff5-8fcc-a83d-261d-d0f153a5900c@foss.arm.com>
Date: Mon, 13 Jun 2022 13:53:02 +0100
From: Carsten Haitzler <carsten.haitzler@...s.arm.com>
To: Mathieu Poirier <mathieu.poirier@...aro.org>
Cc: linux-kernel@...r.kernel.org, coresight@...ts.linaro.org,
suzuki.poulose@....com, mike.leach@...aro.org, leo.yan@...aro.org,
linux-perf-users@...r.kernel.org, acme@...nel.org
Subject: Re: [PATCH 3/3] perf test: Add coresight tests to guage quality of
data generated
On 5/30/22 17:47, Mathieu Poirier wrote:
> On Mon, 30 May 2022 at 10:27, Mathieu Poirier
> <mathieu.poirier@...aro.org> wrote:
>>
>> On Wed, Mar 09, 2022 at 12:28:59PM +0000, carsten.haitzler@...s.arm.com wrote:
>>> From: Carsten Haitzler <carsten.haitzler@....com>
>>>
>>> This adds a test harness and tests to run perf record and examine the
>>> resuling output when coresight is enabled on arm64 and check the
>>> resulting quality of the output as part of perf test. These tests use
>>> various tools to produce output from perf record then measure some key
>>> specific aspects of that data to see if the data exists at all and
>>> contains key aspects such as measuring some data for every thread of
>>> a test or produces sufficient data for large exeuction runs of a large
>>> executable. etc.
>>>
>>> Signed-off-by: Carsten Haitzler <carsten.haitzler@....com>
>>> ---
>>> MAINTAINERS | 4 +
>>> tools/perf/.gitignore | 6 +-
>>> tools/perf/Documentation/arm-coresight.txt | 140 ++++++++++++++++++
>>> tools/perf/Makefile.perf | 14 +-
>>> tools/perf/tests/shell/coresight/Makefile | 30 ++++
>>> .../tests/shell/coresight/Makefile.miniconfig | 23 +++
>>> .../shell/coresight/asm_pure_loop/.gitignore | 1 +
>>> .../shell/coresight/asm_pure_loop/Makefile | 30 ++++
>>> .../coresight/asm_pure_loop/asm_pure_loop.S | 28 ++++
>>> .../shell/coresight/memcpy_thread/.gitignore | 1 +
>>> .../shell/coresight/memcpy_thread/Makefile | 29 ++++
>>> .../coresight/memcpy_thread/memcpy_thread.c | 79 ++++++++++
>>> .../shell/coresight/thread_loop/.gitignore | 1 +
>>> .../shell/coresight/thread_loop/Makefile | 29 ++++
>>> .../shell/coresight/thread_loop/thread_loop.c | 86 +++++++++++
>>> .../coresight/unroll_loop_thread/.gitignore | 1 +
>>> .../coresight/unroll_loop_thread/Makefile | 29 ++++
>>> .../unroll_loop_thread/unroll_loop_thread.c | 74 +++++++++
>>> .../tests/shell/coresight_asm_pure_loop.sh | 18 +++
>>> .../shell/coresight_memcpy_thread_16k_10.sh | 18 +++
>>> .../coresight_thread_loop_check_tid_10.sh | 19 +++
>>> .../coresight_thread_loop_check_tid_2.sh | 19 +++
>>> .../shell/coresight_unroll_loop_thread_10.sh | 18 +++
>>> tools/perf/tests/shell/lib/coresight.sh | 130 ++++++++++++++++
>>> 24 files changed, 823 insertions(+), 4 deletions(-)
>>
>> As Leo pointed out this is a big patch and hard to digest intellectually.
>>
>>> create mode 100644 tools/perf/Documentation/arm-coresight.txt
>>> create mode 100644 tools/perf/tests/shell/coresight/Makefile
>>> create mode 100644 tools/perf/tests/shell/coresight/Makefile.miniconfig
>>> create mode 100644 tools/perf/tests/shell/coresight/asm_pure_loop/.gitignore
>>> create mode 100644 tools/perf/tests/shell/coresight/asm_pure_loop/Makefile
>>> create mode 100644 tools/perf/tests/shell/coresight/asm_pure_loop/asm_pure_loop.S
>>> create mode 100644 tools/perf/tests/shell/coresight/memcpy_thread/.gitignore
>>> create mode 100644 tools/perf/tests/shell/coresight/memcpy_thread/Makefile
>>> create mode 100644 tools/perf/tests/shell/coresight/memcpy_thread/memcpy_thread.c
>>> create mode 100644 tools/perf/tests/shell/coresight/thread_loop/.gitignore
>>> create mode 100644 tools/perf/tests/shell/coresight/thread_loop/Makefile
>>> create mode 100644 tools/perf/tests/shell/coresight/thread_loop/thread_loop.c
>>> create mode 100644 tools/perf/tests/shell/coresight/unroll_loop_thread/.gitignore
>>> create mode 100644 tools/perf/tests/shell/coresight/unroll_loop_thread/Makefile
>>> create mode 100644 tools/perf/tests/shell/coresight/unroll_loop_thread/unroll_loop_thread.c
>>> create mode 100755 tools/perf/tests/shell/coresight_asm_pure_loop.sh
>>> create mode 100755 tools/perf/tests/shell/coresight_memcpy_thread_16k_10.sh
>>> create mode 100755 tools/perf/tests/shell/coresight_thread_loop_check_tid_10.sh
>>> create mode 100755 tools/perf/tests/shell/coresight_thread_loop_check_tid_2.sh
>>> create mode 100755 tools/perf/tests/shell/coresight_unroll_loop_thread_10.sh
>>> create mode 100644 tools/perf/tests/shell/lib/coresight.sh
>>>
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index 673c7124ca82..18cc20609f2e 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -1918,10 +1918,14 @@ F: drivers/hwtracing/coresight/*
>>> F: include/dt-bindings/arm/coresight-cti-dt.h
>>> F: include/linux/coresight*
>>> F: samples/coresight/*
>>> +F: tools/perf/Documentation/arm-coresight.txt
>>> F: tools/perf/arch/arm/util/auxtrace.c
>>> F: tools/perf/arch/arm/util/cs-etm.c
>>> F: tools/perf/arch/arm/util/cs-etm.h
>>> F: tools/perf/arch/arm/util/pmu.c
>>> +F: tools/perf/tests/shell/coresight_*
>>> +F: tools/perf/tests/shell/tools/Makefile
>>> +F: tools/perf/tests/shell/tools/coresight/*
>>> F: tools/perf/util/cs-etm-decoder/*
>>> F: tools/perf/util/cs-etm.*
>>>
>>> diff --git a/tools/perf/.gitignore b/tools/perf/.gitignore
>>> index 20b8ab984d5f..138c679ecacd 100644
>>> --- a/tools/perf/.gitignore
>>> +++ b/tools/perf/.gitignore
>>> @@ -15,8 +15,9 @@ perf*.1
>>> perf*.xml
>>> perf*.html
>>> common-cmds.h
>>> -perf.data
>>> -perf.data.old
>>> +perf*.data
>>> +perf*.data.old
>>> +stats-*.csv
>>> output.svg
>>> perf-archive
>>> perf-with-kcore
>>> @@ -30,6 +31,7 @@ config.mak.autogen
>>> *-flex.*
>>> *.pyc
>>> *.pyo
>>> +*.stdout
>>> .config-detected
>>> util/intel-pt-decoder/inat-tables.c
>>> arch/*/include/generated/
>>> diff --git a/tools/perf/Documentation/arm-coresight.txt b/tools/perf/Documentation/arm-coresight.txt
>>> new file mode 100644
>>> index 000000000000..3a9e6c573c58
>>> --- /dev/null
>>> +++ b/tools/perf/Documentation/arm-coresight.txt
>>
>> I think it would be best to keep all the coresight documentation under the
>> current coresight documentation repository[1]. That way all the information on
>> coresight can be found in a central place.
>>
>> Some part of what is added by this patch is redundant with what is currently
>> available in [1]. Other parts are tests specific and should be added under
>> something like "coresight-perf-test.rst".
>>
>> Thanks,
>> Mathieu
>>
>> [1]. Documentation/trace/coresight/
>>
>
> I forgot... Please add a proper cover letter for this patchset.
ok - sure. next round.
>>
>>> @@ -0,0 +1,140 @@
>>> +Arm Coresight Support
>>> +=====================
>>> +
>>> +Coresight is a feature of some Arm based processors that allows for
>>> +debugging. One of the things it can do is trace every instruction
>>> +executed and remotely expose that information in a hardware compressed
>>> +stream. Perf is able to locally access that stream and store it to the
>>> +output perf data files. This stream can then be later decoded to give the
>>> +instructions that were traced for debugging or profiling purposes. You
>>> +can log such data with a perf record command like:
>>> +
>>> + perf record -e cs_etm//u testbinary
>>> +
>>> +This would run some test binary (testbinary) until it exits and record
>>> +a perf.data trace file. That file would have AUX sections if coresight
>>> +is working correctly. You can dump the content of this file as
>>> +readable text with a command like:
>>> +
>>> + perf report --stdio --dump -i perf.data
>>> +
>>> +You should find some sections of this file have AUX data blocks like:
>>> +
>>> + 0x1e78 [0x30]: PERF_RECORD_AUXTRACE size: 0x11dd0 offset: 0 ref: 0x1b614fc1061b0ad1 idx: 0 tid: 531230 cpu: -1
>>> +
>>> + . ... CoreSight ETM Trace data: size 73168 bytes
>>> + Idx:0; ID:10; I_ASYNC : Alignment Synchronisation.
>>> + Idx:12; ID:10; I_TRACE_INFO : Trace Info.; INFO=0x0 { CC.0 }
>>> + Idx:17; ID:10; I_ADDR_L_64IS0 : Address, Long, 64 bit, IS0.; Addr=0x0000000000000000;
>>> + Idx:26; ID:10; I_TRACE_ON : Trace On.
>>> + Idx:27; ID:10; I_ADDR_CTXT_L_64IS0 : Address & Context, Long, 64 bit, IS0.; Addr=0x0000FFFFB6069140; Ctxt: AArch64,EL0, NS;
>>> + Idx:38; ID:10; I_ATOM_F6 : Atom format 6.; EEEEEEEEEEEEEEEEEEEEEEEE
>>> + Idx:39; ID:10; I_ATOM_F6 : Atom format 6.; EEEEEEEEEEEEEEEEEEEEEEEE
>>> + Idx:40; ID:10; I_ATOM_F6 : Atom format 6.; EEEEEEEEEEEEEEEEEEEEEEEE
>>> + Idx:41; ID:10; I_ATOM_F6 : Atom format 6.; EEEEEEEEEEEN
>>> + ...
>>> +
>>> +If you see these above, then your system is tracing coresight data
>>> +correctly.
>>> +
>>> +To compile perf with coresight support in the perf directory do
>>> +
>>> + make CORESIGHT=1
>>> +
>>> +This will compile the perf tool with coresight support as well as
>>> +build some small test binaries for perf test. This requires you also
>>> +be compiling for 64bit Arm (ARM64/aarch64). The tools run as part of
>>> +perf coresight tracing are in tests/shell/tools/coresight.
>>> +
>>> +You will also want coresight support enabled in your kernel config.
>>> +Ensure it is enabled with:
>>> +
>>> + CONFIG_CORESIGHT=y
>>> +
>>> +There are various other coresight options you probably also want
>>> +enabled like:
>>> +
>>> + CONFIG_CORESIGHT_LINKS_AND_SINKS=y
>>> + CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y
>>> + CONFIG_CORESIGHT_CATU=y
>>> + CONFIG_CORESIGHT_SINK_TPIU=y
>>> + CONFIG_CORESIGHT_SINK_ETBV10=y
>>> + CONFIG_CORESIGHT_SOURCE_ETM4X=y
>>> + CONFIG_CORESIGHT_STM=y
>>> + CONFIG_CORESIGHT_CPU_DEBUG=y
>>> + CONFIG_CORESIGHT_CTI=y
>>> + CONFIG_CORESIGHT_CTI_INTEGRATION_REGS=y
>>> +
>>> +Please refer to the kernel configuration help for more information.
>>> +
>>> +Perf test - Verify kernel and userspace perf coresight work
>>> +===========================================================
>>> +
>>> +When you run perf test, it will do a lot of self tests. Some of those
>>> +tests will cover Coresight (only if enabled and on ARM64). You
>>> +generally would run perf test from the tools/perf directory in the
>>> +kernel tree. Some tests will check some internal perf support like:
>>> +
>>> + Check Arm CoreSight trace data recording and synthesized samples
>>> +
>>> +Some others will actually use perf record and some test binaries that
>>> +are in tests/shell/tools/coresight and will collect traces to ensure a
>>> +minimum level of functionality is met. The scripts that launch these
>>> +tests are in tests/shell. These will all look like:
>>> +
>>> + Coresight / Memcpy 1M 25 Threads
>>> + Coresight / Unroll Loop Thread 2
>>> + ...
>>> +
>>> +These perf record tests will not run if the tool binaries do not exist
>>> +in tests/shell/tools/coresight/*/ and will be skipped. If you do not
>>> +have coresight support in hardware then either do not build perf with
>>> +coresight support or remove these binaries in order to not have these
>>> +tests fail and have them skip instead.
>>> +
>>> +These tests will log historical results in the current working
>>> +directory (e.g. tools/perf) and will be named stats-*.csv like:
>>> +
>>> + stats-asm_pure_loop-out.csv
>>> + stats-bubble_sort-random.csv
>>> + ...
>>> +
>>> +These statistic files log some aspects of the AUX data sections in
>>> +the perf data output counting some numbers of certain encodings (a
>>> +good way to know that it's working in a very simple way). One problem
>>> +with coresight is that given a large enough amount of data needing to
>>> +be logged, some of it can be lost due to the processor not waking up
>>> +in time to read out all the data from buffers etc.. You will notice
>>> +that the amount of data collected can vary a lot per run of perf test.
>>> +If you wish to see how this changes over time, simply run perf test
>>> +multiple times and all these csv files will have more and more data
>>> +appended to it that you can later examine, graph and otherwise use to
>>> +figure out if things have become worse or better.
>>> +
>>> +Be aware that amny of these tests take quite a while to run, specifically
>>> +in processing the perf data file and dumping contents to then examine what
>>> +is inside.
>>> +
>>> +You can change where these csv logs are stored by setting the
>>> +PERF_TEST_CORESIGHT_STATDIR environment variable before running perf
>>> +test like:
>>> +
>>> + export PERF_TEST_CORESIGHT_STATDIR=/var/tmp
>>> + perf test
>>> +
>>> +They will also store resulting perf output data in the current
>>> +directory for later inspection like:
>>> +
>>> + perf-memcpy-1m.data
>>> + perf-thread_loop-2th.data
>>> + ...
>>> +
>>> +You can alter where the perf data files are stored by setting the
>>> +PERF_TEST_CORESIGHT_DATADIR environment variable such as:
>>> +
>>> + PERF_TEST_CORESIGHT_DATADIR=/var/tmp
>>> + perf test
>>> +
>>> +You may wish to set these above environment variables if you which to
>>> +keep the output of tests outside of the current working directory for
>>> +longer term storage and examination.
>>> diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
>>> index ac861e42c8f7..b97db83992e0 100644
>>> --- a/tools/perf/Makefile.perf
>>> +++ b/tools/perf/Makefile.perf
>>> @@ -630,7 +630,15 @@ sync_file_range_tbls := $(srctree)/tools/perf/trace/beauty/sync_file_range.sh
>>> $(sync_file_range_arrays): $(linux_uapi_dir)/fs.h $(sync_file_range_tbls)
>>> $(Q)$(SHELL) '$(sync_file_range_tbls)' $(linux_uapi_dir) > $@
>>>
>>> -all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS)
>>> +TESTS_CORESIGHT_DIR := $(srctree)/tools/perf/tests/shell/coresight
>>> +
>>> +tests-coresight-targets: FORCE
>>> + $(Q)$(MAKE) -C $(TESTS_CORESIGHT_DIR)
>>> +
>>> +tests-coresight-targets-clean:
>>> + $(Q)$(MAKE) -C $(TESTS_CORESIGHT_DIR) clean
>>> +
>>> +all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS) tests-coresight-targets
>>>
>>> # Create python binding output directory if not already present
>>> _dummy := $(shell [ -d '$(OUTPUT)python' ] || mkdir -p '$(OUTPUT)python')
>>> @@ -1020,6 +1028,7 @@ install-tests: all install-gtk
>>> $(INSTALL) tests/shell/*.sh '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell'; \
>>> $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/lib'; \
>>> $(INSTALL) tests/shell/lib/*.sh '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/lib'
>>> + $(Q)$(MAKE) -C tests/shell/coresight install-tests
>>>
>>> install-bin: install-tools install-tests install-traceevent-plugins
>>>
>>> @@ -1088,7 +1097,7 @@ endif # BUILD_BPF_SKEL
>>> bpf-skel-clean:
>>> $(call QUIET_CLEAN, bpf-skel) $(RM) -r $(SKEL_TMP_OUT) $(SKELETONS)
>>>
>>> -clean:: $(LIBTRACEEVENT)-clean $(LIBAPI)-clean $(LIBBPF)-clean $(LIBSUBCMD)-clean $(LIBPERF)-clean fixdep-clean python-clean bpf-skel-clean
>>> +clean:: $(LIBTRACEEVENT)-clean $(LIBAPI)-clean $(LIBBPF)-clean $(LIBSUBCMD)-clean $(LIBPERF)-clean fixdep-clean python-clean bpf-skel-clean tests-coresight-targets-clean
>>> $(call QUIET_CLEAN, core-objs) $(RM) $(LIBPERF_A) $(OUTPUT)perf-archive $(OUTPUT)perf-with-kcore $(OUTPUT)perf-iostat $(LANG_BINDINGS)
>>> $(Q)find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete
>>> $(Q)$(RM) $(OUTPUT).config-detected
>>> @@ -1155,5 +1164,6 @@ FORCE:
>>> .PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell
>>> .PHONY: $(GIT-HEAD-PHONY) TAGS tags cscope FORCE prepare
>>> .PHONY: libtraceevent_plugins archheaders
>>> +.PHONY: $(TESTS_CORESIGHT_TARGETS)
>>>
>>> endif # force_fixdep
>>> diff --git a/tools/perf/tests/shell/coresight/Makefile b/tools/perf/tests/shell/coresight/Makefile
>>> new file mode 100644
>>> index 000000000000..dda99aeac158
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight/Makefile
>>> @@ -0,0 +1,30 @@
>>> +# SPDX-License-Identifier: GPL-2.0-only
>>> +# Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +include ../../../../../tools/scripts/Makefile.include
>>> +include ../../../../../tools/scripts/Makefile.arch
>>> +include ../../../../../tools/scripts/utilities.mak
>>> +
>>> +SUBDIRS = \
>>> + asm_pure_loop \
>>> + thread_loop \
>>> + memcpy_thread \
>>> + unroll_loop_thread
>>> +
>>> +all: $(SUBDIRS)
>>> +$(SUBDIRS):
>>> + $(Q)$(MAKE) -C $@
>>> +
>>> +INSTALLDIRS = $(SUBDIRS:%=install-%)
>>> +
>>> +install-tests: $(INSTALLDIRS)
>>> +$(INSTALLDIRS):
>>> + $(Q)$(MAKE) -C $(@:install-%=%) install-tests
>>> +
>>> +CLEANDIRS = $(SUBDIRS:%=clean-%)
>>> +
>>> +clean: $(CLEANDIRS)
>>> +$(CLEANDIRS):
>>> + $(Q)$(MAKE) -C $(@:clean-%=%) clean >/dev/null
>>> +
>>> +.PHONY: all clean $(SUBDIRS) $(CLEANDIRS) $(INSTALLDIRS)
>>> +
>>> diff --git a/tools/perf/tests/shell/coresight/Makefile.miniconfig b/tools/perf/tests/shell/coresight/Makefile.miniconfig
>>> new file mode 100644
>>> index 000000000000..893c12685fed
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight/Makefile.miniconfig
>>> @@ -0,0 +1,23 @@
>>> +# SPDX-License-Identifier: GPL-2.0-only
>>> +# Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +
>>> +ifndef DESTDIR
>>> +prefix ?= $(HOME)
>>> +endif
>>> +
>>> +DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
>>> +perfexecdir = libexec/perf-core
>>> +perfexec_instdir = $(perfexecdir)
>>> +
>>> +ifneq ($(filter /%,$(firstword $(perfexecdir))),)
>>> +perfexec_instdir = $(perfexecdir)
>>> +else
>>> +perfexec_instdir = $(prefix)/$(perfexecdir)
>>> +endif
>>> +
>>> +perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
>>> +INSTALL = install
>>> +
>>> +include ../../../../../scripts/Makefile.include
>>> +include ../../../../../scripts/Makefile.arch
>>> +include ../../../../../scripts/utilities.mak
>>> diff --git a/tools/perf/tests/shell/coresight/asm_pure_loop/.gitignore b/tools/perf/tests/shell/coresight/asm_pure_loop/.gitignore
>>> new file mode 100644
>>> index 000000000000..468673ac32e8
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight/asm_pure_loop/.gitignore
>>> @@ -0,0 +1 @@
>>> +asm_pure_loop
>>> diff --git a/tools/perf/tests/shell/coresight/asm_pure_loop/Makefile b/tools/perf/tests/shell/coresight/asm_pure_loop/Makefile
>>> new file mode 100644
>>> index 000000000000..10c5a60cb71c
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight/asm_pure_loop/Makefile
>>> @@ -0,0 +1,30 @@
>>> +# SPDX-License-Identifier: GPL-2.0
>>> +# Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +
>>> +include ../Makefile.miniconfig
>>> +
>>> +BIN=asm_pure_loop
>>> +LIB=
>>> +
>>> +all: $(BIN)
>>> +
>>> +$(BIN): $(BIN).S
>>> +ifdef CORESIGHT
>>> +ifeq ($(ARCH),arm64)
>>> + $(Q)$(CC) $(BIN).S -nostdlib -static -o $(BIN) $(LIB)
>>> +endif
>>> +endif
>>> +
>>> +install-tests: all
>>> +ifdef CORESIGHT
>>> +ifeq ($(ARCH),arm64)
>>> + $(call QUIET_INSTALL, tests) \
>>> + $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/tools/$(BIN)'; \
>>> + $(INSTALL) $(BIN) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/tools/$(BIN)/$(BIN)'
>>> +endif
>>> +endif
>>> +
>>> +clean:
>>> + $(Q)$(RM) -f $(BIN)
>>> +
>>> +.PHONY: all clean install-tests
>>> diff --git a/tools/perf/tests/shell/coresight/asm_pure_loop/asm_pure_loop.S b/tools/perf/tests/shell/coresight/asm_pure_loop/asm_pure_loop.S
>>> new file mode 100644
>>> index 000000000000..75cf084a927d
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight/asm_pure_loop/asm_pure_loop.S
>>> @@ -0,0 +1,28 @@
>>> +/* SPDX-License-Identifier: GPL-2.0 */
>>> +/* Tamas Zsoldos <tamas.zsoldos@....com>, 2021 */
>>> +
>>> +.globl _start
>>> +_start:
>>> + mov x0, 0x0000ffff
>>> + mov x1, xzr
>>> +loop:
>>> + nop
>>> + nop
>>> + cbnz x1, noskip
>>> + nop
>>> + nop
>>> + adrp x2, skip
>>> + add x2, x2, :lo12:skip
>>> + br x2
>>> + nop
>>> + nop
>>> +noskip:
>>> + nop
>>> + nop
>>> +skip:
>>> + sub x0, x0, 1
>>> + cbnz x0, loop
>>> +
>>> + mov x0, #0
>>> + mov x8, #93 // __NR_exit syscall
>>> + svc #0
>>> diff --git a/tools/perf/tests/shell/coresight/memcpy_thread/.gitignore b/tools/perf/tests/shell/coresight/memcpy_thread/.gitignore
>>> new file mode 100644
>>> index 000000000000..f8217e56091e
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight/memcpy_thread/.gitignore
>>> @@ -0,0 +1 @@
>>> +memcpy_thread
>>> diff --git a/tools/perf/tests/shell/coresight/memcpy_thread/Makefile b/tools/perf/tests/shell/coresight/memcpy_thread/Makefile
>>> new file mode 100644
>>> index 000000000000..e2604cfae74b
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight/memcpy_thread/Makefile
>>> @@ -0,0 +1,29 @@
>>> +# SPDX-License-Identifier: GPL-2.0
>>> +# Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +include ../Makefile.miniconfig
>>> +
>>> +BIN=memcpy_thread
>>> +LIB=-pthread
>>> +
>>> +all: $(BIN)
>>> +
>>> +$(BIN): $(BIN).c
>>> +ifdef CORESIGHT
>>> +ifeq ($(ARCH),arm64)
>>> + $(Q)$(CC) $(BIN).c -o $(BIN) $(LIB)
>>> +endif
>>> +endif
>>> +
>>> +install-tests: all
>>> +ifdef CORESIGHT
>>> +ifeq ($(ARCH),arm64)
>>> + $(call QUIET_INSTALL, tests) \
>>> + $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/tools/$(BIN)'; \
>>> + $(INSTALL) $(BIN) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/tools/$(BIN)/$(BIN)'
>>> +endif
>>> +endif
>>> +
>>> +clean:
>>> + $(Q)$(RM) -f $(BIN)
>>> +
>>> +.PHONY: all clean install-tests
>>> diff --git a/tools/perf/tests/shell/coresight/memcpy_thread/memcpy_thread.c b/tools/perf/tests/shell/coresight/memcpy_thread/memcpy_thread.c
>>> new file mode 100644
>>> index 000000000000..a7e169d1bf64
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight/memcpy_thread/memcpy_thread.c
>>> @@ -0,0 +1,79 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +// Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +#include <stdio.h>
>>> +#include <stdlib.h>
>>> +#include <unistd.h>
>>> +#include <string.h>
>>> +#include <pthread.h>
>>> +
>>> +struct args {
>>> + unsigned long loops;
>>> + unsigned long size;
>>> + pthread_t th;
>>> + void *ret;
>>> +};
>>> +
>>> +static void *thrfn(void *arg)
>>> +{
>>> + struct args *a = arg;
>>> + unsigned long i, len = a->loops;
>>> + unsigned char *src, *dst;
>>> +
>>> + src = malloc(a->size * 1024);
>>> + dst = malloc(a->size * 1024);
>>> + if ((!src) || (!dst)) {
>>> + printf("ERR: Can't allocate memory\n");
>>> + exit(1);
>>> + }
>>> + for (i = 0; i < len; i++)
>>> + memcpy(dst, src, a->size * 1024);
>>> +}
>>> +
>>> +static pthread_t new_thr(void *(*fn) (void *arg), void *arg)
>>> +{
>>> + pthread_t t;
>>> + pthread_attr_t attr;
>>> +
>>> + pthread_attr_init(&attr);
>>> + pthread_create(&t, &attr, fn, arg);
>>> + return t;
>>> +}
>>> +
>>> +int main(int argc, char **argv)
>>> +{
>>> + unsigned long i, len, size, thr;
>>> + pthread_t threads[256];
>>> + struct args args[256];
>>> + long long v;
>>> +
>>> + if (argc < 4) {
>>> + printf("ERR: %s [copysize Kb] [numthreads] [numloops (hundreds)]\n", argv[0]);
>>> + exit(1);
>>> + }
>>> +
>>> + v = atoll(argv[1]);
>>> + if ((v < 1) || (v > (1024 * 1024))) {
>>> + printf("ERR: max memory 1GB (1048576 KB)\n");
>>> + exit(1);
>>> + }
>>> + size = v;
>>> + thr = atol(argv[2]);
>>> + if ((thr < 1) || (thr > 256)) {
>>> + printf("ERR: threads 1-256\n");
>>> + exit(1);
>>> + }
>>> + v = atoll(argv[3]);
>>> + if ((v < 1) || (v > 40000000000ll)) {
>>> + printf("ERR: loops 1-40000000000 (hundreds)\n");
>>> + exit(1);
>>> + }
>>> + len = v * 100;
>>> + for (i = 0; i < thr; i++) {
>>> + args[i].loops = len;
>>> + args[i].size = size;
>>> + args[i].th = new_thr(thrfn, &(args[i]));
>>> + }
>>> + for (i = 0; i < thr; i++)
>>> + pthread_join(args[i].th, &(args[i].ret));
>>> + return 0;
>>> +}
>>> diff --git a/tools/perf/tests/shell/coresight/thread_loop/.gitignore b/tools/perf/tests/shell/coresight/thread_loop/.gitignore
>>> new file mode 100644
>>> index 000000000000..6d4c33eaa9e8
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight/thread_loop/.gitignore
>>> @@ -0,0 +1 @@
>>> +thread_loop
>>> diff --git a/tools/perf/tests/shell/coresight/thread_loop/Makefile b/tools/perf/tests/shell/coresight/thread_loop/Makefile
>>> new file mode 100644
>>> index 000000000000..424df4e8b0e6
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight/thread_loop/Makefile
>>> @@ -0,0 +1,29 @@
>>> +# SPDX-License-Identifier: GPL-2.0
>>> +# Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +include ../Makefile.miniconfig
>>> +
>>> +BIN=thread_loop
>>> +LIB=-pthread
>>> +
>>> +all: $(BIN)
>>> +
>>> +$(BIN): $(BIN).c
>>> +ifdef CORESIGHT
>>> +ifeq ($(ARCH),arm64)
>>> + $(Q)$(CC) $(BIN).c -o $(BIN) $(LIB)
>>> +endif
>>> +endif
>>> +
>>> +install-tests: all
>>> +ifdef CORESIGHT
>>> +ifeq ($(ARCH),arm64)
>>> + $(call QUIET_INSTALL, tests) \
>>> + $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/tools/$(BIN)'; \
>>> + $(INSTALL) $(BIN) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/tools/$(BIN)/$(BIN)'
>>> +endif
>>> +endif
>>> +
>>> +clean:
>>> + $(Q)$(RM) -f $(BIN)
>>> +
>>> +.PHONY: all clean install-tests
>>> diff --git a/tools/perf/tests/shell/coresight/thread_loop/thread_loop.c b/tools/perf/tests/shell/coresight/thread_loop/thread_loop.c
>>> new file mode 100644
>>> index 000000000000..c0158fac7d0b
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight/thread_loop/thread_loop.c
>>> @@ -0,0 +1,86 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +// Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +
>>> +// define this for gettid()
>>> +#define _GNU_SOURCE
>>> +
>>> +#include <stdio.h>
>>> +#include <stdlib.h>
>>> +#include <unistd.h>
>>> +#include <string.h>
>>> +#include <pthread.h>
>>> +#include <sys/syscall.h>
>>> +#ifndef SYS_gettid
>>> +// gettid is 178 on arm64
>>> +# define SYS_gettid 178
>>> +#endif
>>> +#define gettid() syscall(SYS_gettid)
>>> +
>>> +struct args {
>>> + unsigned int loops;
>>> + pthread_t th;
>>> + void *ret;
>>> +};
>>> +
>>> +static void *thrfn(void *arg)
>>> +{
>>> + struct args *a = arg;
>>> + int i = 0, len = a->loops;
>>> +
>>> + if (getenv("SHOW_TID")) {
>>> + unsigned long long tid = gettid();
>>> +
>>> + printf("%llu\n", tid);
>>> + }
>>> + asm volatile(
>>> + "loop:\n"
>>> + "add %[i], %[i], #1\n"
>>> + "cmp %[i], %[len]\n"
>>> + "blt loop\n"
>>> + : /* out */
>>> + : /* in */ [i] "r" (i), [len] "r" (len)
>>> + : /* clobber */
>>> + );
>>> + return (void *)(long)i;
>>> +}
>>> +
>>> +static pthread_t new_thr(void *(*fn) (void *arg), void *arg)
>>> +{
>>> + pthread_t t;
>>> + pthread_attr_t attr;
>>> +
>>> + pthread_attr_init(&attr);
>>> + pthread_create(&t, &attr, fn, arg);
>>> + return t;
>>> +}
>>> +
>>> +int main(int argc, char **argv)
>>> +{
>>> + unsigned int i, len, thr;
>>> + pthread_t threads[256];
>>> + struct args args[256];
>>> +
>>> + if (argc < 3) {
>>> + printf("ERR: %s [numthreads] [numloops (millions)]\n", argv[0]);
>>> + exit(1);
>>> + }
>>> +
>>> + thr = atoi(argv[1]);
>>> + if ((thr < 1) || (thr > 256)) {
>>> + printf("ERR: threads 1-256\n");
>>> + exit(1);
>>> + }
>>> + len = atoi(argv[2]);
>>> + if ((len < 1) || (len > 4000)) {
>>> + printf("ERR: max loops 4000 (millions)\n");
>>> + exit(1);
>>> + }
>>> + len *= 1000000;
>>> + for (i = 0; i < thr; i++) {
>>> + args[i].loops = len;
>>> + args[i].th = new_thr(thrfn, &(args[i]));
>>> + }
>>> + for (i = 0; i < thr; i++)
>>> + pthread_join(args[i].th, &(args[i].ret));
>>> + return 0;
>>> +}
>>> diff --git a/tools/perf/tests/shell/coresight/unroll_loop_thread/.gitignore b/tools/perf/tests/shell/coresight/unroll_loop_thread/.gitignore
>>> new file mode 100644
>>> index 000000000000..2cb4e996dbf3
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight/unroll_loop_thread/.gitignore
>>> @@ -0,0 +1 @@
>>> +unroll_loop_thread
>>> diff --git a/tools/perf/tests/shell/coresight/unroll_loop_thread/Makefile b/tools/perf/tests/shell/coresight/unroll_loop_thread/Makefile
>>> new file mode 100644
>>> index 000000000000..45ab2be8be92
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight/unroll_loop_thread/Makefile
>>> @@ -0,0 +1,29 @@
>>> +# SPDX-License-Identifier: GPL-2.0
>>> +# Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +include ../Makefile.miniconfig
>>> +
>>> +BIN=unroll_loop_thread
>>> +LIB=-pthread
>>> +
>>> +all: $(BIN)
>>> +
>>> +$(BIN): $(BIN).c
>>> +ifdef CORESIGHT
>>> +ifeq ($(ARCH),arm64)
>>> + $(Q)$(CC) $(BIN).c -o $(BIN) $(LIB)
>>> +endif
>>> +endif
>>> +
>>> +install-tests: all
>>> +ifdef CORESIGHT
>>> +ifeq ($(ARCH),arm64)
>>> + $(call QUIET_INSTALL, tests) \
>>> + $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/tools/$(BIN)'; \
>>> + $(INSTALL) $(BIN) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/tools/$(BIN)/$(BIN)'
>>> +endif
>>> +endif
>>> +
>>> +clean:
>>> + $(Q)$(RM) -f $(BIN)
>>> +
>>> +.PHONY: all clean install-tests
>>> diff --git a/tools/perf/tests/shell/coresight/unroll_loop_thread/unroll_loop_thread.c b/tools/perf/tests/shell/coresight/unroll_loop_thread/unroll_loop_thread.c
>>> new file mode 100644
>>> index 000000000000..cb9d22c7dfb9
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight/unroll_loop_thread/unroll_loop_thread.c
>>> @@ -0,0 +1,74 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +// Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +#include <stdio.h>
>>> +#include <stdlib.h>
>>> +#include <unistd.h>
>>> +#include <string.h>
>>> +#include <pthread.h>
>>> +
>>> +struct args {
>>> + pthread_t th;
>>> + unsigned int in, out;
>>> + void *ret;
>>> +};
>>> +
>>> +static void *thrfn(void *arg)
>>> +{
>>> + struct args *a = arg;
>>> + unsigned int i, in = a->in;
>>> +
>>> + for (i = 0; i < 10000; i++) {
>>> + asm volatile (
>>> +// force an unroll of thia add instruction so we can test long runs of code
>>> +#define SNIP1 "add %[in], %[in], #1\n"
>>> +// 10
>>> +#define SNIP2 SNIP1 SNIP1 SNIP1 SNIP1 SNIP1 SNIP1 SNIP1 SNIP1 SNIP1 SNIP1
>>> +// 100
>>> +#define SNIP3 SNIP2 SNIP2 SNIP2 SNIP2 SNIP2 SNIP2 SNIP2 SNIP2 SNIP2 SNIP2
>>> +// 1000
>>> +#define SNIP4 SNIP3 SNIP3 SNIP3 SNIP3 SNIP3 SNIP3 SNIP3 SNIP3 SNIP3 SNIP3
>>> +// 10000
>>> +#define SNIP5 SNIP4 SNIP4 SNIP4 SNIP4 SNIP4 SNIP4 SNIP4 SNIP4 SNIP4 SNIP4
>>> +// 100000
>>> + SNIP5 SNIP5 SNIP5 SNIP5 SNIP5 SNIP5 SNIP5 SNIP5 SNIP5 SNIP5
>>> + : /* out */
>>> + : /* in */ [in] "r" (in)
>>> + : /* clobber */
>>> + );
>>> + }
>>> +}
>>> +
>>> +static pthread_t new_thr(void *(*fn) (void *arg), void *arg)
>>> +{
>>> + pthread_t t;
>>> + pthread_attr_t attr;
>>> +
>>> + pthread_attr_init(&attr);
>>> + pthread_create(&t, &attr, fn, arg);
>>> + return t;
>>> +}
>>> +
>>> +int main(int argc, char **argv)
>>> +{
>>> + unsigned int i, thr;
>>> + pthread_t threads[256];
>>> + struct args args[256];
>>> +
>>> + if (argc < 2) {
>>> + printf("ERR: %s [numthreads]\n", argv[0]);
>>> + exit(1);
>>> + }
>>> +
>>> + thr = atoi(argv[1]);
>>> + if ((thr > 256) || (thr < 1)) {
>>> + printf("ERR: threads 1-256\n");
>>> + exit(1);
>>> + }
>>> + for (i = 0; i < thr; i++) {
>>> + args[i].in = rand();
>>> + args[i].th = new_thr(thrfn, &(args[i]));
>>> + }
>>> + for (i = 0; i < thr; i++)
>>> + pthread_join(args[i].th, &(args[i].ret));
>>> + return 0;
>>> +}
>>> diff --git a/tools/perf/tests/shell/coresight_asm_pure_loop.sh b/tools/perf/tests/shell/coresight_asm_pure_loop.sh
>>> new file mode 100755
>>> index 000000000000..3f0dbefcad50
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight_asm_pure_loop.sh
>>> @@ -0,0 +1,18 @@
>>> +#!/bin/sh -e
>>> +# Coresight / ASM Pure Loop
>>> +
>>> +# SPDX-License-Identifier: GPL-2.0
>>> +# Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +
>>> +TEST="asm_pure_loop"
>>> +. $(dirname $0)/lib/coresight.sh
>>> +ARGS=""
>>> +DATV="out"
>>> +DATA="$DATD/perf-$TEST-$DATV.data"
>>> +
>>> +perf record $PERFRECOPT -o "$DATA" "$BIN" $ARGS
>>> +
>>> +perf_dump_aux_verify "$DATA" 10 10 10
>>> +
>>> +err=$?
>>> +exit $err
>>> diff --git a/tools/perf/tests/shell/coresight_memcpy_thread_16k_10.sh b/tools/perf/tests/shell/coresight_memcpy_thread_16k_10.sh
>>> new file mode 100755
>>> index 000000000000..8972af835016
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight_memcpy_thread_16k_10.sh
>>> @@ -0,0 +1,18 @@
>>> +#!/bin/sh -e
>>> +# Coresight / Memcpy 16k 10 Threads
>>> +
>>> +# SPDX-License-Identifier: GPL-2.0
>>> +# Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +
>>> +TEST="memcpy_thread"
>>> +. $(dirname $0)/lib/coresight.sh
>>> +ARGS="16 10 1"
>>> +DATV="16k_10"
>>> +DATA="$DATD/perf-$TEST-$DATV.data"
>>> +
>>> +perf record $PERFRECOPT -o "$DATA" "$BIN" $ARGS
>>> +
>>> +perf_dump_aux_verify "$DATA" 10 10 10
>>> +
>>> +err=$?
>>> +exit $err
>>> diff --git a/tools/perf/tests/shell/coresight_thread_loop_check_tid_10.sh b/tools/perf/tests/shell/coresight_thread_loop_check_tid_10.sh
>>> new file mode 100755
>>> index 000000000000..5b468901f89b
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight_thread_loop_check_tid_10.sh
>>> @@ -0,0 +1,19 @@
>>> +#!/bin/sh -e
>>> +# Coresight / Thread Loop 10 Threads - Check TID
>>> +
>>> +# SPDX-License-Identifier: GPL-2.0
>>> +# Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +
>>> +TEST="thread_loop"
>>> +. $(dirname $0)/lib/coresight.sh
>>> +ARGS="10 1"
>>> +DATV="check-tid-10th"
>>> +DATA="$DATD/perf-$TEST-$DATV.data"
>>> +STDO="$DATD/perf-$TEST-$DATV.stdout"
>>> +
>>> +SHOW_TID=1 perf record -s $PERFRECOPT -o "$DATA" "$BIN" $ARGS > $STDO
>>> +
>>> +perf_dump_aux_tid_verify "$DATA" "$STDO"
>>> +
>>> +err=$?
>>> +exit $err
>>> diff --git a/tools/perf/tests/shell/coresight_thread_loop_check_tid_2.sh b/tools/perf/tests/shell/coresight_thread_loop_check_tid_2.sh
>>> new file mode 100755
>>> index 000000000000..f8b7abd3aa03
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight_thread_loop_check_tid_2.sh
>>> @@ -0,0 +1,19 @@
>>> +#!/bin/sh -e
>>> +# Coresight / Thread Loop 2 Threads - Check TID
>>> +
>>> +# SPDX-License-Identifier: GPL-2.0
>>> +# Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +
>>> +TEST="thread_loop"
>>> +. $(dirname $0)/lib/coresight.sh
>>> +ARGS="2 20"
>>> +DATV="check-tid-2th"
>>> +DATA="$DATD/perf-$TEST-$DATV.data"
>>> +STDO="$DATD/perf-$TEST-$DATV.stdout"
>>> +
>>> +SHOW_TID=1 perf record -s $PERFRECOPT -o "$DATA" "$BIN" $ARGS > $STDO
>>> +
>>> +perf_dump_aux_tid_verify "$DATA" "$STDO"
>>> +
>>> +err=$?
>>> +exit $err
>>> diff --git a/tools/perf/tests/shell/coresight_unroll_loop_thread_10.sh b/tools/perf/tests/shell/coresight_unroll_loop_thread_10.sh
>>> new file mode 100755
>>> index 000000000000..c985dfb025c2
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/coresight_unroll_loop_thread_10.sh
>>> @@ -0,0 +1,18 @@
>>> +#!/bin/sh -e
>>> +# Coresight / Unroll Loop Thread 10
>>> +
>>> +# SPDX-License-Identifier: GPL-2.0
>>> +# Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +
>>> +TEST="unroll_loop_thread"
>>> +. $(dirname $0)/lib/coresight.sh
>>> +ARGS="10"
>>> +DATV="10"
>>> +DATA="$DATD/perf-$TEST-$DATV.data"
>>> +
>>> +perf record $PERFRECOPT -o "$DATA" "$BIN" $ARGS
>>> +
>>> +perf_dump_aux_verify "$DATA" 10 10 10
>>> +
>>> +err=$?
>>> +exit $err
>>> diff --git a/tools/perf/tests/shell/lib/coresight.sh b/tools/perf/tests/shell/lib/coresight.sh
>>> new file mode 100644
>>> index 000000000000..6a611b073f02
>>> --- /dev/null
>>> +++ b/tools/perf/tests/shell/lib/coresight.sh
>>> @@ -0,0 +1,130 @@
>>> +# SPDX-License-Identifier: GPL-2.0
>>> +# Carsten Haitzler <carsten.haitzler@....com>, 2021
>>> +
>>> +# This is sourced from a driver script so no need for #!/bin... etc. at the
>>> +# top - the assumption below is that it runs as part of sourcing after the
>>> +# test sets up some basic env vars to say what it is.
>>> +
>>> +# perf record options for the perf tests to use
>>> +PERFRECMEM="-m ,128M"
>>> +PERFRECOPT="$PERFRECMEM -e cs_etm//u"
>>> +
>>> +# These tests need to be run as root or coresight won't allow large buffers
>>> +# and will not collect proper data
>>> +UID=`id -u`
>>> +if test "$UID" -ne 0; then
>>> + echo "Not running as root... skip"
>>> + exit 2
>>> +fi
>>> +
>>> +TOOLS=$(dirname $0)
>>> +DIR="$TOOLS/coresight/$TEST"
>>> +BIN="$DIR/$TEST"
>>> +# If the test tool/binary does not exist and is executable then skip the test
>>> +if ! test -x "$BIN"; then exit 2; fi
>>> +DATD="."
>>> +# If the data dir env is set then make the data dir use that instead of ./
>>> +if test -n "$PERF_TEST_CORESIGHT_DATADIR"; then
>>> + DATD="$PERF_TEST_CORESIGHT_DATADIR";
>>> +fi
>>> +# If the stat dir env is set then make the data dir use that instead of ./
>>> +STATD="."
>>> +if test -n "$PERF_TEST_CORESIGHT_STATDIR"; then
>>> + STATD="$PERF_TEST_CORESIGHT_STATDIR";
>>> +fi
>>> +
>>> +# Called if the test fails - error code 2
>>> +err() {
>>> + echo "$1"
>>> + exit 1
>>> +}
>>> +
>>> +# Check that some statistics from our perf
>>> +check_val_min() {
>>> + STATF="$4"
>>> + if test "$2" -lt "$3"; then
>>> + echo ", FAILED" >> "$STATF"
>>> + err "Sanity check number of $1 is too low ($2 < $3)"
>>> + fi
>>> +}
>>> +
>>> +perf_dump_aux_verify() {
>>> + # Some basic checking that the AUX chunk contains some sensible data
>>> + # to see that we are recording something and at least a minimum
>>> + # amount of it. We should almost always see F3 atoms in just about
>>> + # anything but certainly we will see some trace info and async atom
>>> + # chunks.
>>> + DUMP="$DATD/perf-tmp-aux-dump.txt"
>>> + perf report --stdio --dump -i "$1" | \
>>> + grep -o -e I_ATOM_F3 -e I_ASYNC -e I_TRACE_INFO > "$DUMP"
>>> + # Simply count how many of these atoms we find to see that we are
>>> + # producing a reasonable amount of data - exact checks are not sane
>>> + # as this is a lossy process where we may lose some blocks and the
>>> + # compiler may produce different code depending on the compiler and
>>> + # optimization options, so this is rough just to see if we're
>>> + # either missing almost all the data or all of it
>>> + ATOM_F3_NUM=`grep I_ATOM_F3 "$DUMP" | wc -l`
>>> + ATOM_ASYNC_NUM=`grep I_ASYNC "$DUMP" | wc -l`
>>> + ATOM_TRACE_INFO_NUM=`grep I_TRACE_INFO "$DUMP" | wc -l`
>>> + rm -f "$DUMP"
>>> +
>>> + # Arguments provide minimums for a pass
>>> + CHECK_F3_MIN="$2"
>>> + CHECK_ASYNC_MIN="$3"
>>> + CHECK_TRACE_INFO_MIN="$4"
>>> +
>>> + # Write out statistics, so over time you can track results to see if
>>> + # there is a pattern - for example we have less "noisy" results that
>>> + # produce more consistent amounts of data each run, to see if over
>>> + # time any techinques to minimize data loss are having an effect or
>>> + # not
>>> + STATF="$STATD/stats-$TEST-$DATV.csv"
>>> + if ! test -f "$STATF"; then
>>> + echo "ATOM F3 Count, Minimum, ATOM ASYNC Count, Minimum, TRACE INFO Count, Minimum" > "$STATF"
>>> + fi
>>> + echo -n "$ATOM_F3_NUM, $CHECK_F3_MIN, $ATOM_ASYNC_NUM, $CHECK_ASYNC_MIN, $ATOM_TRACE_INFO_NUM, $CHECK_TRACE_INFO_MIN" >> "$STATF"
>>> +
>>> + # Actually check to see if we passed or failed.
>>> + check_val_min "ATOM_F3" "$ATOM_F3_NUM" "$CHECK_F3_MIN" "$STATF"
>>> + check_val_min "ASYNC" "$ATOM_ASYNC_NUM" "$CHECK_ASYNC_MIN" "$STATF"
>>> + check_val_min "TRACE_INFO" "$ATOM_TRACE_INFO_NUM" "$CHECK_TRACE_INFO_MIN" "$STATF"
>>> + echo ", Ok" >> "$STATF"
>>> +}
>>> +
>>> +perf_dump_aux_tid_verify() {
>>> + # Specifically crafted test will produce a list of Tread ID's to
>>> + # stdout that need to be checked to see that they have had trace
>>> + # info collected in AUX blocks in the perf data. This will go
>>> + # through all the TID's that are listed as CID=0xabcdef and see
>>> + # that all the Thread IDs the test tool reports are in the perf
>>> + # data AUX chunks
>>> +
>>> + # The TID test tools will print a TID per stdout line that are being
>>> + # tested
>>> + TIDS=`cat "$2"`
>>> + # Scan the perf report to find the TIDs that are actually CID in hex
>>> + # and build a list of the ones found
>>> + FOUND_TIDS=`perf report --stdio --dump -i "$1" | \
>>> + grep -o "CID=0x[0-9a-z]\+" | sed 's/CID=//g' | \
>>> + uniq | sort | uniq`
>>> +
>>> + # Iterate over the list of TIDs that the test says it has and find
>>> + # them in the TIDs found in the perf report
>>> + MISSING=""
>>> + for TID2 in $TIDS; do
>>> + FOUND=""
>>> + for TIDHEX in $FOUND_TIDS; do
>>> + TID=`printf "%i" $TIDHEX`
>>> + if test "$TID" -eq "$TID2"; then
>>> + FOUND="y"
>>> + break
>>> + fi
>>> + done
>>> + if test -z "$FOUND"; then
>>> + MISSING="$MISSING $TID"
>>> + fi
>>> + done
>>> + if test -n "$MISSING"; then
>>> + err "Thread IDs $MISSING not found in perf AUX data"
>>> + fi
>>> +}
>>> --
>>> 2.32.0
>>>
Powered by blists - more mailing lists