| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 13 Jun 2022 16:51:17 -0400
From: Nícolas F. R. A. Prado
<nfraprado@...labora.com>
To: Prashant Malani <pmalani@...omium.org>
Cc: linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
bleung@...omium.org, swboyd@...omium.org,
heikki.krogerus@...ux.intel.com,
Pin-Yen Lin <treapking@...omium.org>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Daniel Vetter <daniel@...ll.ch>,
David Airlie <airlied@...ux.ie>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"open list:DRM DRIVERS" <dri-devel@...ts.freedesktop.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Hsin-Yi Wang <hsinyi@...omium.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Jonas Karlman <jonas@...boo.se>,
José Expósito <jose.exposito89@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Maxime Ripard <maxime@...no.tech>,
Neil Armstrong <narmstrong@...libre.com>,
Robert Foss <robert.foss@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Sam Ravnborg <sam@...nborg.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
Tzung-Bi Shih <tzungbi@...gle.com>,
Xin Ji <xji@...logixsemi.com>
Subject: Re: [PATCH v2 7/7] drm/bridge: anx7625: Add typec_mux_set callback
function
Hi Prashant,
On Thu, Jun 09, 2022 at 06:09:46PM +0000, Prashant Malani wrote:
> From: Pin-Yen Lin <treapking@...omium.org>
>
> Add the callback function when the driver receives state
> changes of the Type-C port. The callback function configures the
> crosspoint switch of the anx7625 bridge chip, which can change the
> output pins of the signals according to the port state.
>
> Signed-off-by: Pin-Yen Lin <treapking@...omium.org>
> Signed-off-by: Prashant Malani <pmalani@...omium.org>
> ---
>
> Changes since v2:
> - No changes.
>
> drivers/gpu/drm/bridge/analogix/anx7625.c | 58 +++++++++++++++++++++++
> drivers/gpu/drm/bridge/analogix/anx7625.h | 13 +++++
> 2 files changed, 71 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index d41a21103bd3..2c308d12fab2 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -15,6 +15,7 @@
> #include <linux/regulator/consumer.h>
> #include <linux/slab.h>
> #include <linux/types.h>
> +#include <linux/usb/typec_dp.h>
> #include <linux/usb/typec_mux.h>
> #include <linux/workqueue.h>
>
> @@ -2582,9 +2583,66 @@ static void anx7625_runtime_disable(void *data)
> pm_runtime_disable(data);
> }
>
> +static void anx7625_set_crosspoint_switch(struct anx7625_data *ctx,
> + enum typec_orientation orientation)
> +{
> + if (orientation == TYPEC_ORIENTATION_NORMAL) {
> + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
> + SW_SEL1_SSRX_RX1 | SW_SEL1_DPTX0_RX2);
> + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
> + SW_SEL2_SSTX_TX1 | SW_SEL2_DPTX1_TX2);
> + } else if (orientation == TYPEC_ORIENTATION_REVERSE) {
> + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
> + SW_SEL1_SSRX_RX2 | SW_SEL1_DPTX0_RX1);
> + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
> + SW_SEL2_SSTX_TX2 | SW_SEL2_DPTX1_TX1);
> + }
> +}
> +
> +static void anx7625_typec_two_ports_update(struct anx7625_data *ctx)
> +{
> + if (ctx->typec_ports[0].dp_connected && ctx->typec_ports[1].dp_connected)
> + /* Both ports available, do nothing to retain the current one. */
> + return;
> + else if (ctx->typec_ports[0].dp_connected)
> + anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_NORMAL);
> + else if (ctx->typec_ports[1].dp_connected)
> + anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_REVERSE);
> +}
> +
> static int anx7625_typec_mux_set(struct typec_mux_dev *mux,
> struct typec_mux_state *state)
> {
> + struct anx7625_port_data *data = typec_mux_get_drvdata(mux);
> + struct anx7625_data *ctx = data->ctx;
> + struct device *dev = &ctx->client->dev;
> +
> + bool old_dp_connected = (ctx->typec_ports[0].dp_connected ||
> + ctx->typec_ports[1].dp_connected);
Here you're assuming you have 2 switches. Given that this on its own doesn't do
anything, just move it after the
if (ctx->num_typec_switches == 1)
return 0;
check.
Thanks,
Nícolas
> + bool new_dp_connected;
> +
> + if (ctx->num_typec_switches == 1)
> + return 0;
> +
> + dev_dbg(dev, "mux_set dp_connected: c0=%d, c1=%d\n",
> + ctx->typec_ports[0].dp_connected, ctx->typec_ports[1].dp_connected);
> +
> + data->dp_connected = (state->alt && state->alt->svid == USB_TYPEC_DP_SID &&
> + state->alt->mode == USB_TYPEC_DP_MODE);
> +
> + new_dp_connected = (ctx->typec_ports[0].dp_connected ||
> + ctx->typec_ports[1].dp_connected);
> +
> + /* dp on, power on first */
> + if (!old_dp_connected && new_dp_connected)
> + pm_runtime_get_sync(dev);
> +
> + anx7625_typec_two_ports_update(ctx);
> +
> + /* dp off, power off last */
> + if (old_dp_connected && !new_dp_connected)
> + pm_runtime_put_sync(dev);
> +
> return 0;
> }
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> index 76cfc64f7574..7d6c6fdf9a3a 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> @@ -55,6 +55,18 @@
> #define HPD_STATUS_CHANGE 0x80
> #define HPD_STATUS 0x80
>
> +#define TCPC_SWITCH_0 0xB4
> +#define SW_SEL1_DPTX0_RX2 BIT(0)
> +#define SW_SEL1_DPTX0_RX1 BIT(1)
> +#define SW_SEL1_SSRX_RX2 BIT(4)
> +#define SW_SEL1_SSRX_RX1 BIT(5)
> +
> +#define TCPC_SWITCH_1 0xB5
> +#define SW_SEL2_DPTX1_TX2 BIT(0)
> +#define SW_SEL2_DPTX1_TX1 BIT(1)
> +#define SW_SEL2_SSTX_TX2 BIT(4)
> +#define SW_SEL2_SSTX_TX1 BIT(5)
> +
> /******** END of I2C Address 0x58 ********/
>
> /***************************************************************/
> @@ -444,6 +456,7 @@ struct anx7625_i2c_client {
> };
>
> struct anx7625_port_data {
> + bool dp_connected;
> struct typec_mux_dev *typec_mux;
> struct anx7625_data *ctx;
> };
> --
> 2.36.1.476.g0c4daa206d-goog
>
Powered by blists - more mailing lists