[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CACeCKafc22gEL5e6pBidNBSh71AAcghaCn=e0U65prPDkp_x=A@mail.gmail.com>
Date: Mon, 13 Jun 2022 14:31:47 -0700
From: Prashant Malani <pmalani@...omium.org>
To: Nícolas F. R. A. Prado
<nfraprado@...labora.com>
Cc: linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
bleung@...omium.org, swboyd@...omium.org,
heikki.krogerus@...ux.intel.com,
Pin-Yen Lin <treapking@...omium.org>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Daniel Vetter <daniel@...ll.ch>,
David Airlie <airlied@...ux.ie>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"open list:DRM DRIVERS" <dri-devel@...ts.freedesktop.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Hsin-Yi Wang <hsinyi@...omium.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Jonas Karlman <jonas@...boo.se>,
José Expósito <jose.exposito89@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Maxime Ripard <maxime@...no.tech>,
Neil Armstrong <narmstrong@...libre.com>,
Robert Foss <robert.foss@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Sam Ravnborg <sam@...nborg.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
Tzung-Bi Shih <tzungbi@...gle.com>,
Xin Ji <xji@...logixsemi.com>
Subject: Re: [PATCH v2 7/7] drm/bridge: anx7625: Add typec_mux_set callback function
Hi Nícolas,
On Mon, Jun 13, 2022 at 1:51 PM Nícolas F. R. A. Prado
<nfraprado@...labora.com> wrote:
>
> Hi Prashant,
>
> On Thu, Jun 09, 2022 at 06:09:46PM +0000, Prashant Malani wrote:
> > From: Pin-Yen Lin <treapking@...omium.org>
> >
> > Add the callback function when the driver receives state
> > changes of the Type-C port. The callback function configures the
> > crosspoint switch of the anx7625 bridge chip, which can change the
> > output pins of the signals according to the port state.
> >
> > Signed-off-by: Pin-Yen Lin <treapking@...omium.org>
> > Signed-off-by: Prashant Malani <pmalani@...omium.org>
> > ---
> >
> > Changes since v2:
> > - No changes.
> >
> > drivers/gpu/drm/bridge/analogix/anx7625.c | 58 +++++++++++++++++++++++
> > drivers/gpu/drm/bridge/analogix/anx7625.h | 13 +++++
> > 2 files changed, 71 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > index d41a21103bd3..2c308d12fab2 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > @@ -15,6 +15,7 @@
> > #include <linux/regulator/consumer.h>
> > #include <linux/slab.h>
> > #include <linux/types.h>
> > +#include <linux/usb/typec_dp.h>
> > #include <linux/usb/typec_mux.h>
> > #include <linux/workqueue.h>
> >
> > @@ -2582,9 +2583,66 @@ static void anx7625_runtime_disable(void *data)
> > pm_runtime_disable(data);
> > }
> >
> > +static void anx7625_set_crosspoint_switch(struct anx7625_data *ctx,
> > + enum typec_orientation orientation)
> > +{
> > + if (orientation == TYPEC_ORIENTATION_NORMAL) {
> > + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
> > + SW_SEL1_SSRX_RX1 | SW_SEL1_DPTX0_RX2);
> > + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
> > + SW_SEL2_SSTX_TX1 | SW_SEL2_DPTX1_TX2);
> > + } else if (orientation == TYPEC_ORIENTATION_REVERSE) {
> > + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
> > + SW_SEL1_SSRX_RX2 | SW_SEL1_DPTX0_RX1);
> > + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
> > + SW_SEL2_SSTX_TX2 | SW_SEL2_DPTX1_TX1);
> > + }
> > +}
> > +
> > +static void anx7625_typec_two_ports_update(struct anx7625_data *ctx)
> > +{
> > + if (ctx->typec_ports[0].dp_connected && ctx->typec_ports[1].dp_connected)
> > + /* Both ports available, do nothing to retain the current one. */
> > + return;
> > + else if (ctx->typec_ports[0].dp_connected)
> > + anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_NORMAL);
> > + else if (ctx->typec_ports[1].dp_connected)
> > + anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_REVERSE);
> > +}
> > +
> > static int anx7625_typec_mux_set(struct typec_mux_dev *mux,
> > struct typec_mux_state *state)
> > {
> > + struct anx7625_port_data *data = typec_mux_get_drvdata(mux);
> > + struct anx7625_data *ctx = data->ctx;
> > + struct device *dev = &ctx->client->dev;
> > +
> > + bool old_dp_connected = (ctx->typec_ports[0].dp_connected ||
> > + ctx->typec_ports[1].dp_connected);
>
> Here you're assuming you have 2 switches. Given that this on its own doesn't do
> anything, just move it after the
>
> if (ctx->num_typec_switches == 1)
> return 0;
>
> check.
Sure. I will fix this up in v3. Thanks!
>
> Thanks,
> Nícolas
>
> > + bool new_dp_connected;
> > +
> > + if (ctx->num_typec_switches == 1)
> > + return 0;
> > +
> > + dev_dbg(dev, "mux_set dp_connected: c0=%d, c1=%d\n",
> > + ctx->typec_ports[0].dp_connected, ctx->typec_ports[1].dp_connected);
> > +
> > + data->dp_connected = (state->alt && state->alt->svid == USB_TYPEC_DP_SID &&
> > + state->alt->mode == USB_TYPEC_DP_MODE);
> > +
> > + new_dp_connected = (ctx->typec_ports[0].dp_connected ||
> > + ctx->typec_ports[1].dp_connected);
> > +
> > + /* dp on, power on first */
> > + if (!old_dp_connected && new_dp_connected)
> > + pm_runtime_get_sync(dev);
> > +
> > + anx7625_typec_two_ports_update(ctx);
> > +
> > + /* dp off, power off last */
> > + if (old_dp_connected && !new_dp_connected)
> > + pm_runtime_put_sync(dev);
> > +
> > return 0;
> > }
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > index 76cfc64f7574..7d6c6fdf9a3a 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > @@ -55,6 +55,18 @@
> > #define HPD_STATUS_CHANGE 0x80
> > #define HPD_STATUS 0x80
> >
> > +#define TCPC_SWITCH_0 0xB4
> > +#define SW_SEL1_DPTX0_RX2 BIT(0)
> > +#define SW_SEL1_DPTX0_RX1 BIT(1)
> > +#define SW_SEL1_SSRX_RX2 BIT(4)
> > +#define SW_SEL1_SSRX_RX1 BIT(5)
> > +
> > +#define TCPC_SWITCH_1 0xB5
> > +#define SW_SEL2_DPTX1_TX2 BIT(0)
> > +#define SW_SEL2_DPTX1_TX1 BIT(1)
> > +#define SW_SEL2_SSTX_TX2 BIT(4)
> > +#define SW_SEL2_SSTX_TX1 BIT(5)
> > +
> > /******** END of I2C Address 0x58 ********/
> >
> > /***************************************************************/
> > @@ -444,6 +456,7 @@ struct anx7625_i2c_client {
> > };
> >
> > struct anx7625_port_data {
> > + bool dp_connected;
> > struct typec_mux_dev *typec_mux;
> > struct anx7625_data *ctx;
> > };
> > --
> > 2.36.1.476.g0c4daa206d-goog
> >
Powered by blists - more mailing lists