linux-kernel - [PATCH v9 0/3] arm64: mvebu: Support for Marvell 98DX2530 (and variants)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220613225338.393-1-vadym.kochan@plvision.eu>
Date:   Tue, 14 Jun 2022 01:53:21 +0300
From:   Vadym Kochan <vadym.kochan@...ision.eu>
To:     Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will@...nel.org>,
        Vadym Kochan <vadym.kochan@...ision.eu>,
        Chris Packham <chris.packham@...iedtelesis.co.nz>,
        Gregory CLEMENT <gregory.clement@...tlin.com>,
        Konstantin Porotchkin <kostap@...vell.com>,
        Robert Marko <robert.marko@...tura.hr>,
        Andrew Lunn <andrew@...n.ch>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v9 0/3] arm64: mvebu: Support for Marvell 98DX2530 (and variants)

This series adds support for the Marvell 98DX2530 SoC which is the Control and
Management CPU integrated into the AlleyCat5/AlleyCat5X series of Marvell
switches.

The CPU core is an ARM Cortex-A55 with neon, simd and crypto extensions.

This is fairly similar to the Armada-3700 SoC so most of the required
peripherals are already supported. This series adds a devicetree and pinctrl
driver for the SoC and the RD-AC5X-32G16HVG6HLG reference board.

The pinctrl changes from v4 have been picked up and are in linux-next so I
haven't included them in this round. That leaves just the dts files and a minor
Kconfig update for arm64.

Changes:

v9 (proposed by Marvell):
   It was discussed with Chris that Marvell will add some changes:
      1) Rename "armada-" prefix in dts(i) file names to ac5, because
         Armada has not much common with AC5 SoC.

      2) Add clock fixes:
         a) rename core_clock to cnm_clock

         b) remove axi_clock

         c) change cnm_clock to 325MHZ

         d) use cnm_clock for the UART

Chris Packham (3):
  dt-bindings: marvell: Document the AC5/AC5X compatibles
  arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board
  arm64: marvell: enable the 98DX2530 pinctrl driver

 .../bindings/arm/marvell/ac5-98dx25xx.yaml    |  32 ++
 arch/arm64/Kconfig.platforms                  |   2 +
 arch/arm64/boot/dts/marvell/Makefile          |   1 +
 arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 291 ++++++++++++++++++
 .../boot/dts/marvell/ac5-98dx35xx-rd.dts      | 101 ++++++
 arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi |  13 +
 6 files changed, 440 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/marvell/ac5-98dx25xx.yaml
 create mode 100644 arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts
 create mode 100644 arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi

-- 
2.17.1