[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1655115733-16309-11-git-send-email-quic_srivasam@quicinc.com>
Date: Mon, 13 Jun 2022 15:52:11 +0530
From: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
To: <agross@...nel.org>, <bjorn.andersson@...aro.org>,
<robh+dt@...nel.org>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<quic_rohkumar@...cinc.com>, <srinivas.kandagatla@...aro.org>,
<dianders@...omium.org>, <swboyd@...omium.org>,
<judyhsiao@...omium.org>
CC: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>,
"Venkata Prasad Potturu" <quic_potturu@...cinc.com>
Subject: [PATCH v13 10/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1
Enable lpass cpu node and add pin control and dai-links for audio on
sc7280 based platforms of rev5+ (aka CRD 3.0/3.1) boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
---
.../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
index 32a1e78..2303b98 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -5,6 +5,34 @@
* Copyright (c) 2022, The Linux Foundation. All rights reserved.
*/
+&lpass_cpu {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+ dai-link@1 {
+ reg = <MI2S_SECONDARY>;
+ qcom,playback-sd-lines = <0>;
+ };
+
+ dai-link@5 {
+ reg = <LPASS_DP_RX>;
+ };
+
+ dai-link@6 {
+ reg = <LPASS_CDC_DMA_RX0>;
+ };
+
+ dai-link@19 {
+ reg = <LPASS_CDC_DMA_TX3>;
+ };
+
+ dai-link@25 {
+ reg = <LPASS_CDC_DMA_VA_TX0>;
+ };
+};
+
&mi2s1_data0 {
drive-strength = <6>;
bias-disable;
--
2.7.4
Powered by blists - more mailing lists