[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1655115733-16309-6-git-send-email-quic_srivasam@quicinc.com>
Date: Mon, 13 Jun 2022 15:52:06 +0530
From: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
To: <agross@...nel.org>, <bjorn.andersson@...aro.org>,
<robh+dt@...nel.org>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<quic_rohkumar@...cinc.com>, <srinivas.kandagatla@...aro.org>,
<dianders@...omium.org>, <swboyd@...omium.org>,
<judyhsiao@...omium.org>
CC: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>,
"Venkata Prasad Potturu" <quic_potturu@...cinc.com>
Subject: [PATCH v13 05/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1
Add wcd9385 codec node for audio use case on CRD rev5+ (aka CRD 3.0/3.1)
boards. Add tlmm gpio property for switching CTIA/OMTP Headset.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 4 ++
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 52 +++++++++++++++++++++++
2 files changed, 56 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
index 32927db..c7537fb 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -155,6 +155,10 @@ ap_ts_pen_1v8: &i2c13 {
status = "okay";
};
+&wcd9385 {
+ status = "okay";
+};
+
/* PINCTRL - BOARD-SPECIFIC */
/*
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index e933ebf..efa6787 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -30,6 +30,37 @@
serial1 = &uart7;
};
+ wcd9385: audio-codec-1 {
+ compatible = "qcom,wcd9385-codec";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
+ pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>;
+
+ reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+ us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ vdd-rxtx-supply = <&vreg_l18b_1p8>;
+ vdd-io-supply = <&vreg_l18b_1p8>;
+ vdd-buck-supply = <&vreg_l17b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob>;
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000
+ 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ #sound-dai-cells = <1>;
+
+ status = "disabled";
+ };
+
pm8350c_pwm_backlight: backlight {
compatible = "pwm-backlight";
status = "disabled";
@@ -629,4 +660,25 @@ mos_bt_uart: &uart7 {
bias-pull-up;
drive-strength = <2>;
};
+
+ us_euro_hs_sel: us-euro-hs-sel {
+ pins = "gpio81";
+ function = "gpio";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ wcd_reset_n: wcd-reset-n {
+ pins = "gpio83";
+ function = "gpio";
+ drive-strength = <8>;
+ output-high;
+ };
+
+ wcd_reset_n_sleep: wcd-reset-n-sleep {
+ pins = "gpio83";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
};
--
2.7.4
Powered by blists - more mailing lists