linux-kernel - [PATCH 4.9 099/167] rtl818x: Prevent using not initialized queues

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220613094904.087405436@linuxfoundation.org>
Date:   Mon, 13 Jun 2022 12:09:33 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, pa@...ix.com,
        Alexander Wetzel <alexander@...zel-home.de>,
        Kalle Valo <kvalo@...nel.org>
Subject: [PATCH 4.9 099/167] rtl818x: Prevent using not initialized queues

From: Alexander Wetzel <alexander@...zel-home.de>

commit 746285cf81dc19502ab238249d75f5990bd2d231 upstream.

Using not existing queues can panic the kernel with rtl8180/rtl8185 cards.
Ignore the skb priority for those cards, they only have one tx queue. Pierre
Asselin (pa@...ix.com) reported the kernel crash in the Gentoo forum:

https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start-25.html

He also confirmed that this patch fixes the issue. In summary this happened:

After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a
"divide error: 0000" when connecting to an AP. Control port tx now tries to
use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in
2.10.

Since only the rtl8187se part of the driver supports QoS, the priority
of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185
cards.

rtl8180 is then unconditionally reading out the priority and finally crashes on
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this
patch:
	idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries

"ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got
initialized.

Cc: stable@...r.kernel.org
Reported-by: pa@...ix.com
Tested-by: pa@...ix.com
Signed-off-by: Alexander Wetzel <alexander@...zel-home.de>
Signed-off-by: Kalle Valo <kvalo@...nel.org>
Link: https://lore.kernel.org/r/20220422145228.7567-1-alexander@wetzel-home.de
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
@@ -460,8 +460,10 @@ static void rtl8180_tx(struct ieee80211_
 	struct rtl8180_priv *priv = dev->priv;
 	struct rtl8180_tx_ring *ring;
 	struct rtl8180_tx_desc *entry;
+	unsigned int prio = 0;
 	unsigned long flags;
-	unsigned int idx, prio, hw_prio;
+	unsigned int idx, hw_prio;
+
 	dma_addr_t mapping;
 	u32 tx_flags;
 	u8 rc_flags;
@@ -470,7 +472,9 @@ static void rtl8180_tx(struct ieee80211_
 	/* do arithmetic and then convert to le16 */
 	u16 frame_duration = 0;
 
-	prio = skb_get_queue_mapping(skb);
+	/* rtl8180/rtl8185 only has one useable tx queue */
+	if (dev->queues > IEEE80211_AC_BK)
+		prio = skb_get_queue_mapping(skb);
 	ring = &priv->tx_ring[prio];
 
 	mapping = pci_map_single(priv->pdev, skb->data,