lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220613094927.117961408@linuxfoundation.org>
Date:   Mon, 13 Jun 2022 12:11:12 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Ariel Miculas <ariel.miculas@...den.com>,
        Christophe Leroy <christophe.leroy@...roup.eu>,
        Michael Ellerman <mpe@...erman.id.au>
Subject: [PATCH 4.14 214/218] powerpc/32: Fix overread/overwrite of thread_struct via ptrace

From: Michael Ellerman <mpe@...erman.id.au>

commit 8e1278444446fc97778a5e5c99bca1ce0bbc5ec9 upstream.

The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process
to read/write registers of another process.

To get/set a register, the API takes an index into an imaginary address
space called the "USER area", where the registers of the process are
laid out in some fashion.

The kernel then maps that index to a particular register in its own data
structures and gets/sets the value.

The API only allows a single machine-word to be read/written at a time.
So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels.

The way floating point registers (FPRs) are addressed is somewhat
complicated, because double precision float values are 64-bit even on
32-bit CPUs. That means on 32-bit kernels each FPR occupies two
word-sized locations in the USER area. On 64-bit kernels each FPR
occupies one word-sized location in the USER area.

Internally the kernel stores the FPRs in an array of u64s, or if VSX is
enabled, an array of pairs of u64s where one half of each pair stores
the FPR. Which half of the pair stores the FPR depends on the kernel's
endianness.

To handle the different layouts of the FPRs depending on VSX/no-VSX and
big/little endian, the TS_FPR() macro was introduced.

Unfortunately the TS_FPR() macro does not take into account the fact
that the addressing of each FPR differs between 32-bit and 64-bit
kernels. It just takes the index into the "USER area" passed from
userspace and indexes into the fp_state.fpr array.

On 32-bit there are 64 indexes that address FPRs, but only 32 entries in
the fp_state.fpr array, meaning the user can read/write 256 bytes past
the end of the array. Because the fp_state sits in the middle of the
thread_struct there are various fields than can be overwritten,
including some pointers. As such it may be exploitable.

It has also been observed to cause systems to hang or otherwise
misbehave when using gdbserver, and is probably the root cause of this
report which could not be easily reproduced:
  https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/

Rather than trying to make the TS_FPR() macro even more complicated to
fix the bug, or add more macros, instead add a special-case for 32-bit
kernels. This is more obvious and hopefully avoids a similar bug
happening again in future.

Note that because 32-bit kernels never have VSX enabled the code doesn't
need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to
ensure that 32-bit && VSX is never enabled.

Fixes: 87fec0514f61 ("powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian builds")
Cc: stable@...r.kernel.org # v3.13+
Reported-by: Ariel Miculas <ariel.miculas@...den.com>
Tested-by: Christophe Leroy <christophe.leroy@...roup.eu>
Signed-off-by: Michael Ellerman <mpe@...erman.id.au>
Link: https://lore.kernel.org/r/20220609133245.573565-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 arch/powerpc/kernel/ptrace.c |   18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -2920,8 +2920,13 @@ long arch_ptrace(struct task_struct *chi
 
 			flush_fp_to_thread(child);
 			if (fpidx < (PT_FPSCR - PT_FPR0))
-				memcpy(&tmp, &child->thread.TS_FPR(fpidx),
-				       sizeof(long));
+				if (IS_ENABLED(CONFIG_PPC32)) {
+					// On 32-bit the index we are passed refers to 32-bit words
+					tmp = ((u32 *)child->thread.fp_state.fpr)[fpidx];
+				} else {
+					memcpy(&tmp, &child->thread.TS_FPR(fpidx),
+					       sizeof(long));
+				}
 			else
 				tmp = child->thread.fp_state.fpscr;
 		}
@@ -2953,8 +2958,13 @@ long arch_ptrace(struct task_struct *chi
 
 			flush_fp_to_thread(child);
 			if (fpidx < (PT_FPSCR - PT_FPR0))
-				memcpy(&child->thread.TS_FPR(fpidx), &data,
-				       sizeof(long));
+				if (IS_ENABLED(CONFIG_PPC32)) {
+					// On 32-bit the index we are passed refers to 32-bit words
+					((u32 *)child->thread.fp_state.fpr)[fpidx] = data;
+				} else {
+					memcpy(&child->thread.TS_FPR(fpidx), &data,
+					       sizeof(long));
+				}
 			else
 				child->thread.fp_state.fpscr = data;
 			ret = 0;


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ