[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ac31307f9186fc851f76889a66ffb007de88fa15.camel@collabora.com>
Date: Tue, 14 Jun 2022 12:23:47 -0400
From: Nicolas Dufresne <nicolas.dufresne@...labora.com>
To: Hans Verkuil <hverkuil@...all.nl>,
Benjamin Gaignard <benjamin.gaignard@...labora.com>,
mchehab@...nel.org, ezequiel@...guardiasur.com.ar,
p.zabel@...gutronix.de, gregkh@...uxfoundation.org,
mripard@...nel.org, paul.kocialkowski@...tlin.com, wens@...e.org,
jernej.skrabec@...il.com, samuel@...lland.org,
andrzej.p@...labora.com
Cc: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-rockchip@...ts.infradead.org, linux-staging@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
kernel@...labora.com
Subject: Re: [PATCH v8 14/17] media: hantro: Stop using Hantro dedicated
control
Le mardi 14 juin 2022 à 17:47 +0200, Hans Verkuil a écrit :
>
> On 6/14/22 17:43, Nicolas Dufresne wrote:
> > Le mardi 14 juin 2022 à 15:58 +0200, Hans Verkuil a écrit :
> > > On 6/14/22 10:36, Benjamin Gaignard wrote:
> > > > The number of bits to skip in the slice header can be computed
> > > > in the driver by using sps, pps and decode_params information.
> > > > This allow to remove Hantro dedicated control.
> > >
> > > allow -> makes it possible
> > >
> > > >
> > > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@...labora.com>
> > > > ---
> > > > drivers/staging/media/hantro/hantro_drv.c | 36 -----------
> > > > .../staging/media/hantro/hantro_g2_hevc_dec.c | 62 ++++++++++++++++++-
> > > > include/media/hevc-ctrls.h | 13 ----
> > > > 3 files changed, 61 insertions(+), 50 deletions(-)
> > > >
> > > > diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> > > > index 536c8c374952..5aac3a090480 100644
> > > > --- a/drivers/staging/media/hantro/hantro_drv.c
> > > > +++ b/drivers/staging/media/hantro/hantro_drv.c
> > > > @@ -304,26 +304,6 @@ static int hantro_jpeg_s_ctrl(struct v4l2_ctrl *ctrl)
> > > > return 0;
> > > > }
> > > >
> > > > -static int hantro_hevc_s_ctrl(struct v4l2_ctrl *ctrl)
> > > > -{
> > > > - struct hantro_ctx *ctx;
> > > > -
> > > > - ctx = container_of(ctrl->handler,
> > > > - struct hantro_ctx, ctrl_handler);
> > > > -
> > > > - vpu_debug(1, "s_ctrl: id = %d, val = %d\n", ctrl->id, ctrl->val);
> > > > -
> > > > - switch (ctrl->id) {
> > > > - case V4L2_CID_HANTRO_HEVC_SLICE_HEADER_SKIP:
> > > > - ctx->hevc_dec.ctrls.hevc_hdr_skip_length = ctrl->val;
> > > > - break;
> > > > - default:
> > > > - return -EINVAL;
> > > > - }
> > > > -
> > > > - return 0;
> > > > -}
> > > > -
> > > > static const struct v4l2_ctrl_ops hantro_ctrl_ops = {
> > > > .try_ctrl = hantro_try_ctrl,
> > > > };
> > > > @@ -332,10 +312,6 @@ static const struct v4l2_ctrl_ops hantro_jpeg_ctrl_ops = {
> > > > .s_ctrl = hantro_jpeg_s_ctrl,
> > > > };
> > > >
> > > > -static const struct v4l2_ctrl_ops hantro_hevc_ctrl_ops = {
> > > > - .s_ctrl = hantro_hevc_s_ctrl,
> > > > -};
> > > > -
> > > > #define HANTRO_JPEG_ACTIVE_MARKERS (V4L2_JPEG_ACTIVE_MARKER_APP0 | \
> > > > V4L2_JPEG_ACTIVE_MARKER_COM | \
> > > > V4L2_JPEG_ACTIVE_MARKER_DQT | \
> > > > @@ -487,18 +463,6 @@ static const struct hantro_ctrl controls[] = {
> > > > .cfg = {
> > > > .id = V4L2_CID_STATELESS_HEVC_SCALING_MATRIX,
> > > > },
> > > > - }, {
> > > > - .codec = HANTRO_HEVC_DECODER,
> > > > - .cfg = {
> > > > - .id = V4L2_CID_HANTRO_HEVC_SLICE_HEADER_SKIP,
> > > > - .name = "Hantro HEVC slice header skip bytes",
> > > > - .type = V4L2_CTRL_TYPE_INTEGER,
> > > > - .min = 0,
> > > > - .def = 0,
> > > > - .max = 0x100,
> > > > - .step = 1,
> > > > - .ops = &hantro_hevc_ctrl_ops,
> > > > - },
> > > > }, {
> > > > .codec = HANTRO_VP9_DECODER,
> > > > .cfg = {
> > > > diff --git a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
> > > > index d28653d04d20..3be8d6e60bf0 100644
> > > > --- a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
> > > > +++ b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
> > > > @@ -117,6 +117,66 @@ static void prepare_tile_info_buffer(struct hantro_ctx *ctx)
> > > > vpu_debug(1, "%s: no chroma!\n", __func__);
> > > > }
> > > >
> > > > +static unsigned int ceil_log2(unsigned int v)
> > > > +{
> > > > + /* Compute Ceil(Log2(v))
> > > > + * Derived from branchless code for integer log2(v) from:
> > > > + * <http://graphics.stanford.edu/~seander/bithacks.html#IntegerLog>
> > > > + */
> > > > + unsigned int r, shift;
> > > > +
> > > > + v--;
> > > > + r = (v > 0xFFFF) << 4;
> > > > + v >>= r;
> > > > + shift = (v > 0xFF) << 3;
> > > > + v >>= shift;
> > > > + r |= shift;
> > > > + shift = (v > 0xF) << 2;
> > > > + v >>= shift;
> > > > + r |= shift;
> > > > + shift = (v > 0x3) << 1;
> > > > + v >>= shift;
> > > > + r |= shift;
> > > > + r |= (v >> 1);
> > > > +
> > > > + return r + 1;
> > > > +}
> > >
> > > Isn't this identical to fls(v - 1)? See also lib/math/reciprocal_div.c
> > > where this is used.
> >
> > Thanks for pointing this out, I was wondering if there was an equivalent, and
> > never knew there was a relation between log2() and the "last set bit". Not sure
> > about the -1 here though, can you extend ?
>
> Based on how lib/math/reciprocal_div.c did it. Also, the ceil_log2 function
> starts with v--, while fls doesn't. That said, it's wise to verify that that
> is correct.
Just for the reference, from lib/math/reciprocal_div.c:
/* ceil(log2(d)) */
l = fls(d - 1);
Perhaps fls() return position starting from 1 rather then 0 ?
Nicolas
>
> Regards,
>
> Hans
>
> >
> > >
> > > Regards,
> > >
> > > Hans
> > >
> > > > +
> > > > +static int compute_header_skip_lenght(struct hantro_ctx *ctx)
> > > > +{
> > > > + const struct hantro_hevc_dec_ctrls *ctrls = &ctx->hevc_dec.ctrls;
> > > > + const struct v4l2_ctrl_hevc_decode_params *decode_params = ctrls->decode_params;
> > > > + const struct v4l2_ctrl_hevc_sps *sps = ctrls->sps;
> > > > + const struct v4l2_ctrl_hevc_pps *pps = ctrls->pps;
> > > > + int skip = 0;
> > > > +
> > > > + if (pps->flags & V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT)
> > > > + /* size of pic_output_flag */
> > > > + skip++;
> > > > +
> > > > + if (sps->flags & V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE)
> > > > + /* size of pic_order_cnt_lsb */
> > > > + skip += 2;
> > > > +
> > > > + if (!(decode_params->flags & V4L2_HEVC_DECODE_PARAM_FLAG_IDR_PIC)) {
> > > > + /* size of pic_order_cnt_lsb */
> > > > + skip += sps->log2_max_pic_order_cnt_lsb_minus4 + 4;
> > > > +
> > > > + /* size of short_term_ref_pic_set_sps_flag */
> > > > + skip++;
> > > > +
> > > > + if (decode_params->short_term_ref_pic_set_size)
> > > > + /* size of st_ref_pic_set( num_short_term_ref_pic_sets ) */
> > > > + skip += decode_params->short_term_ref_pic_set_size;
> > > > + else if (sps->num_short_term_ref_pic_sets > 1)
> > > > + skip += ceil_log2(sps->num_short_term_ref_pic_sets);
> > > > +
> > > > + skip += decode_params->long_term_ref_pic_set_size;
> > > > + }
> > > > +
> > > > + return skip;
> > > > +}
> > > > +
> > > > static void set_params(struct hantro_ctx *ctx)
> > > > {
> > > > const struct hantro_hevc_dec_ctrls *ctrls = &ctx->hevc_dec.ctrls;
> > > > @@ -134,7 +194,7 @@ static void set_params(struct hantro_ctx *ctx)
> > > >
> > > > hantro_reg_write(vpu, &g2_output_8_bits, 0);
> > > >
> > > > - hantro_reg_write(vpu, &g2_hdr_skip_length, ctrls->hevc_hdr_skip_length);
> > > > + hantro_reg_write(vpu, &g2_hdr_skip_length, compute_header_skip_lenght(ctx));
> > > >
> > > > min_log2_cb_size = sps->log2_min_luma_coding_block_size_minus3 + 3;
> > > > max_log2_ctb_size = min_log2_cb_size + sps->log2_diff_max_min_luma_coding_block_size;
> > > > diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
> > > > index d6cb3779d190..efc0412ac41e 100644
> > > > --- a/include/media/hevc-ctrls.h
> > > > +++ b/include/media/hevc-ctrls.h
> > > > @@ -467,17 +467,4 @@ struct v4l2_ctrl_hevc_scaling_matrix {
> > > > __u8 scaling_list_dc_coef_32x32[2];
> > > > };
> > > >
> > > > -/* MPEG-class control IDs specific to the Hantro driver as defined by V4L2 */
> > > > -#define V4L2_CID_CODEC_HANTRO_BASE (V4L2_CTRL_CLASS_CODEC | 0x1200)
> > > > -/*
> > > > - * V4L2_CID_HANTRO_HEVC_SLICE_HEADER_SKIP -
> > > > - * the number of data (in bits) to skip in the
> > > > - * slice segment header.
> > > > - * If non-IDR, the bits to be skipped go from syntax element "pic_output_flag"
> > > > - * to before syntax element "slice_temporal_mvp_enabled_flag".
> > > > - * If IDR, the skipped bits are just "pic_output_flag"
> > > > - * (separate_colour_plane_flag is not supported).
> > > > - */
> > > > -#define V4L2_CID_HANTRO_HEVC_SLICE_HEADER_SKIP (V4L2_CID_CODEC_HANTRO_BASE + 0)
> > > > -
> > > > #endif
> > >
> >
Powered by blists - more mailing lists