linux-kernel - Re: [PATCH v2] PCI: mediatek-gen3: Print LTSSM state when PCIe link down

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 14 Jun 2022 10:15:03 +0800
From:   Jianjun Wang <jianjun.wang@...iatek.com>
To:     Bjorn Helgaas <bhelgaas@...gle.com>,
        Ryder Lee <ryder.lee@...iatek.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>
CC:     AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Wilczyński <kw@...ux.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        <linux-pci@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <jieyy.yang@...iatek.com>,
        <chuanjia.liu@...iatek.com>, <qizhong.cheng@...iatek.com>,
        <jian.yang@...iatek.com>
Subject: Re: [PATCH v2] PCI: mediatek-gen3: Print LTSSM state when PCIe link
 down

Hi Maintainers,

Just gentle ping for this patch, is there anything I can to do to get
this patch merged?

Thanks.

On Wed, 2022-06-01 at 10:24 +0800, Jianjun Wang wrote:
> Hello Maintainers,
> 
> Is there anything I can do to get this patch merged?
> 
> Thanks.
> 
> On Wed, 2022-05-18 at 09:55 +0800, Jianjun Wang wrote:
> > Hi Maintainers,
> > 
> > Gentle ping for this patch, if there is anything I can do to get
> > this
> > patch merged, please let me know.
> > 
> > Thanks.
> > 
> > On Fri, 2022-04-22 at 14:33 +0800, Jianjun Wang wrote:
> > > Hi Maintainers,
> > > 
> > > Just gentle ping for this patch, if there is anything I can do to
> > > get
> > > this patch merged, please let me know.
> > > 
> > > Thanks.
> > > 
> > > On Tue, 2022-03-29 at 11:07 +0800, Jianjun Wang wrote:
> > > > Print current LTSSM state when PCIe link down instead of the
> > > > register
> > > > value, make it easier to get the link status.
> > > > 
> > > > Signed-off-by: Jianjun Wang <jianjun.wang@...iatek.com>
> > > > Reviewed-by: AngeloGioacchino Del Regno <
> > > > angelogioacchino.delregno@...labora.com>
> > > > ---
> > > > Changes in v2:
> > > > Print both of the register value and the LTSSM state.
> > > > ---
> > > >  drivers/pci/controller/pcie-mediatek-gen3.c | 41
> > > > ++++++++++++++++++++-
> > > >  1 file changed, 40 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c
> > > > b/drivers/pci/controller/pcie-mediatek-gen3.c
> > > > index 6745076a02b9..c24e03c198b7 100644
> > > > --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> > > > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> > > > @@ -153,6 +153,37 @@ struct mtk_gen3_pcie {
> > > >  	DECLARE_BITMAP(msi_irq_in_use, PCIE_MSI_IRQS_NUM);
> > > >  };
> > > >  
> > > > +/* LTSSM state in PCIE_LTSSM_STATUS_REG bit[28:24] */
> > > > +static const char *const ltssm_str[] = {
> > > > +	"detect.quiet",			/* 0x00 */
> > > > +	"detect.active",		/* 0x01 */
> > > > +	"polling.active",		/* 0x02 */
> > > > +	"polling.compliance",		/* 0x03 */
> > > > +	"polling.configuration",	/* 0x04 */
> > > > +	"config.linkwidthstart",	/* 0x05 */
> > > > +	"config.linkwidthaccept",	/* 0x06 */
> > > > +	"config.lanenumwait",		/* 0x07 */
> > > > +	"config.lanenumaccept",		/* 0x08 */
> > > > +	"config.complete",		/* 0x09 */
> > > > +	"config.idle",			/* 0x0A */
> > > > +	"recovery.receiverlock",	/* 0x0B */
> > > > +	"recovery.equalization",	/* 0x0C */
> > > > +	"recovery.speed",		/* 0x0D */
> > > > +	"recovery.receiverconfig",	/* 0x0E */
> > > > +	"recovery.idle",		/* 0x0F */
> > > > +	"L0",				/* 0x10 */
> > > > +	"L0s",				/* 0x11 */
> > > > +	"L1.entry",			/* 0x12 */
> > > > +	"L1.idle",			/* 0x13 */
> > > > +	"L2.idle",			/* 0x14 */
> > > > +	"L2.transmitwake",		/* 0x15 */
> > > > +	"disable",			/* 0x16 */
> > > > +	"loopback.entry",		/* 0x17 */
> > > > +	"loopback.active",		/* 0x18 */
> > > > +	"loopback.exit",		/* 0x19 */
> > > > +	"hotreset",			/* 0x1A */
> > > > +};
> > > > +
> > > >  /**
> > > >   * mtk_pcie_config_tlp_header() - Configure a configuration
> > > > TLP
> > > > header
> > > >   * @bus: PCI bus to query
> > > > @@ -327,8 +358,16 @@ static int mtk_pcie_startup_port(struct
> > > > mtk_gen3_pcie *pcie)
> > > >  				 !!(val & PCIE_PORT_LINKUP),
> > > > 20,
> > > >  				 PCI_PM_D3COLD_WAIT *
> > > > USEC_PER_MSEC);
> > > >  	if (err) {
> > > > +		const char *ltssm_state;
> > > > +		int ltssm_index;
> > > > +
> > > >  		val = readl_relaxed(pcie->base +
> > > > PCIE_LTSSM_STATUS_REG);
> > > > -		dev_err(pcie->dev, "PCIe link down, ltssm reg
> > > > val:
> > > > %#x\n", val);
> > > > +		ltssm_index = PCIE_LTSSM_STATE(val);
> > > > +		ltssm_state = ltssm_index >=
> > > > ARRAY_SIZE(ltssm_str) ?
> > > > +			      "Unknown state" :
> > > > ltssm_str[ltssm_index];
> > > > +		dev_err(pcie->dev,
> > > > +			"PCIe link down, current ltssm state:
> > > > %s
> > > > (%#x)\n",
> > > > +			ltssm_state, val);
> > > >  		return err;
> > > >  	}
> > > >  
> > > 
> > > 
> > 
> > 
> 
>