[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220614030030.1249850-6-boon.leong.ong@intel.com>
Date: Tue, 14 Jun 2022 11:00:30 +0800
From: Ong Boon Leong <boon.leong.ong@...el.com>
To: Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <Jose.Abreu@...opsys.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Paolo Abeni <pabeni@...hat.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Vladimir Oltean <olteanv@...il.com>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Emilio Riva <emilio.riva@...csson.com>,
Ong Boon Leong <boon.leong.ong@...el.com>
Subject: [PATCH net-next v4 5/5] net: stmmac: make mdio register skips PHY scanning for fixed-link
stmmac_mdio_register() lacks fixed-link consideration and only skip PHY
scanning if it has done DT style PHY discovery. So, for DT or ACPI _DSD
setting of fixed-link, the PHY scanning should not happen.
Tested-by: Emilio Riva <emilio.riva@...csson.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@...el.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 ++++++-----
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 14 ++++++++++++++
2 files changed, 20 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 73cae2938f6..bc8edd88175 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1141,19 +1141,20 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
*/
static int stmmac_init_phy(struct net_device *dev)
{
+ struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
struct stmmac_priv *priv = netdev_priv(dev);
- struct device_node *node;
int ret;
- node = priv->plat->phylink_node;
+ if (!fwnode)
+ fwnode = dev_fwnode(priv->device);
- if (node)
- ret = phylink_of_phy_connect(priv->phylink, node, 0);
+ if (fwnode)
+ ret = phylink_fwnode_phy_connect(priv->phylink, fwnode, 0);
/* Some DT bindings do not set-up the PHY handle. Let's try to
* manually parse it
*/
- if (!node || ret) {
+ if (!fwnode || ret) {
int addr = priv->plat->phy_addr;
struct phy_device *phydev;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 03d3d1f7aa4..5f177ea8072 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -434,9 +434,11 @@ int stmmac_mdio_register(struct net_device *ndev)
int err = 0;
struct mii_bus *new_bus;
struct stmmac_priv *priv = netdev_priv(ndev);
+ struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
struct device_node *mdio_node = priv->plat->mdio_node;
struct device *dev = ndev->dev.parent;
+ struct fwnode_handle *fixed_node;
int addr, found, max_addr;
if (!mdio_bus_data)
@@ -490,6 +492,18 @@ int stmmac_mdio_register(struct net_device *ndev)
if (priv->plat->has_xgmac)
stmmac_xgmac2_mdio_read(new_bus, 0, MII_ADDR_C45);
+ /* If fixed-link is set, skip PHY scanning */
+ if (!fwnode)
+ fwnode = dev_fwnode(priv->device);
+
+ if (fwnode) {
+ fixed_node = fwnode_get_named_child_node(fwnode, "fixed-link");
+ if (fixed_node) {
+ fwnode_handle_put(fixed_node);
+ goto bus_register_done;
+ }
+ }
+
if (priv->plat->phy_node || mdio_node)
goto bus_register_done;
--
2.25.1
Powered by blists - more mailing lists