[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220614084612.325229-1-linux@rasmusvillemoes.dk>
Date: Tue, 14 Jun 2022 10:46:09 +0200
From: Rasmus Villemoes <linux@...musvillemoes.dk>
To: netdev@...r.kernel.org, Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>
Cc: devicetree@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Jakub Kicinski <kuba@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Grygorii Strashko <grygorii.strashko@...com>,
Praneeth Bajjuri <praneeth@...com>,
linux-kernel@...r.kernel.org,
Rasmus Villemoes <linux@...musvillemoes.dk>
Subject: [PATCH net-next v2 0/3] dt-bindings: dp83867: add binding for io_impedance_ctrl nvmem cell
We have a board where measurements indicate that the current three
options - leaving IO_IMPEDANCE_CTRL at the reset value (which is
factory calibrated to a value corresponding to approximately 50 ohms)
or using one of the two boolean properties to set it to the min/max
value - are too coarse.
This series adds a device tree binding for an nvmem cell which can be
populated during production with a suitable value calibrated for each
board, and corresponding support in the driver. The second patch adds
a trivial phy wrapper for dev_err_probe(), used in the third.
v2: Improve commit message for patch 1; add Rob's R-b to patch 1. No
changes in the patches themselves.
Since Dan Murphy's email address bounces, cc'ing two other @ti.com
addresses that have touched the driver in recent years.
Rasmus Villemoes (3):
dt-bindings: dp83867: add binding for io_impedance_ctrl nvmem cell
linux/phy.h: add phydev_err_probe() wrapper for dev_err_probe()
net: phy: dp83867: implement support for io_impedance_ctrl nvmem cell
.../devicetree/bindings/net/ti,dp83867.yaml | 18 +++++-
drivers/net/phy/dp83867.c | 55 +++++++++++++++++--
include/linux/phy.h | 3 +
3 files changed, 67 insertions(+), 9 deletions(-)
--
2.31.1
Powered by blists - more mailing lists