lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2e1584f4804c88c4ae9a460c7cb2d4a57ff72e7d.camel@mediatek.com>
Date:   Wed, 15 Jun 2022 19:33:47 +0800
From:   "yunfei.dong@...iatek.com" <yunfei.dong@...iatek.com>
To:     Nicolas Dufresne <nicolas@...fresne.ca>,
        Alexandre Courbot <acourbot@...omium.org>,
        Hans Verkuil <hverkuil-cisco@...all.nl>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>,
        Benjamin Gaignard <benjamin.gaignard@...labora.com>,
        Tiffany Lin <tiffany.lin@...iatek.com>,
        Andrew-CT Chen <andrew-ct.chen@...iatek.com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Tomasz Figa <tfiga@...gle.com>
CC:     George Sun <george.sun@...iatek.com>,
        Xiaoyong Lu <xiaoyong.lu@...iatek.com>,
        Hsin-Yi Wang <hsinyi@...omium.org>,
        "Fritz Koenig" <frkoenig@...omium.org>,
        Daniel Vetter <daniel@...ll.ch>,
        dri-devel <dri-devel@...ts.freedesktop.org>,
        Irui Wang <irui.wang@...iatek.com>,
        "Steve Cho" <stevecho@...omium.org>, <linux-media@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>,
        <Project_Global_Chrome_Upstream_Group@...iatek.com>
Subject: Re: [PATCH v4, 3/3] media: mediatek: vcodec: add h264 decoder
 driver for mt8186

Hi Nicolas,

Thanks for your comments.
On Mon, 2022-06-13 at 16:08 -0400, Nicolas Dufresne wrote:
> Le jeudi 12 mai 2022 à 11:46 +0800, Yunfei Dong a écrit :
> > Add h264 decode driver to support mt8186. For the architecture
> > is single core, need to add new interface to decode.
> > 
> > Signed-off-by: Yunfei Dong <yunfei.dong@...iatek.com>
> > ---
> >  .../vcodec/vdec/vdec_h264_req_multi_if.c      | 177
> > +++++++++++++++++-
> >  1 file changed, 176 insertions(+), 1 deletion(-)
> > 
> > diff --git
> > a/drivers/media/platform/mediatek/vcodec/vdec/vdec_h264_req_multi_i
> > f.c
> > b/drivers/media/platform/mediatek/vcodec/vdec/vdec_h264_req_multi_i
> > f.c
> > index a96f203b5d54..1d9e753cf894 100644
> > ---
> > a/drivers/media/platform/mediatek/vcodec/vdec/vdec_h264_req_multi_i
> > f.c
> > +++
> > b/drivers/media/platform/mediatek/vcodec/vdec/vdec_h264_req_multi_i
> > f.c
> > @@ -140,6 +140,9 @@ struct vdec_h264_slice_share_info {
> >   * @vsi:		vsi used for lat
> >   * @vsi_core:		vsi used for core
> >   *
> > + * @vsi_ctx:		Local VSI data for this decoding
> > context
> > + * @h264_slice_param:	the parameters that hardware use to
> > decode
> > + *
> >   * @resolution_changed:resolution changed
> >   * @realloc_mv_buf:	reallocate mv buffer
> >   * @cap_num_planes:	number of capture queue plane
> > @@ -157,6 +160,9 @@ struct vdec_h264_slice_inst {
> >  	struct vdec_h264_slice_vsi *vsi;
> >  	struct vdec_h264_slice_vsi *vsi_core;
> >  
> > +	struct vdec_h264_slice_vsi vsi_ctx;
> > +	struct vdec_h264_slice_lat_dec_param h264_slice_param;
> > +
> >  	unsigned int resolution_changed;
> >  	unsigned int realloc_mv_buf;
> >  	unsigned int cap_num_planes;
> > @@ -208,6 +214,61 @@ static int
> > vdec_h264_slice_fill_decode_parameters(struct vdec_h264_slice_inst
> > *i
> >  	return 0;
> >  }
> >  
> > +static int get_vdec_sig_decode_parameters(struct
> > vdec_h264_slice_inst *inst)
> > +{
> > +	const struct v4l2_ctrl_h264_decode_params *dec_params;
> > +	const struct v4l2_ctrl_h264_sps *sps;
> > +	const struct v4l2_ctrl_h264_pps *pps;
> > +	const struct v4l2_ctrl_h264_scaling_matrix *scaling_matrix;
> > +	struct vdec_h264_slice_lat_dec_param *slice_param = &inst-
> > >h264_slice_param;
> > +	struct v4l2_h264_reflist_builder reflist_builder;
> > +	u8 *p0_reflist = slice_param->decode_params.ref_pic_list_p0;
> > +	u8 *b0_reflist = slice_param->decode_params.ref_pic_list_b0;
> > +	u8 *b1_reflist = slice_param->decode_params.ref_pic_list_b1;
> > +
> > +	dec_params =
> > +		mtk_vdec_h264_get_ctrl_ptr(inst->ctx,
> > V4L2_CID_STATELESS_H264_DECODE_PARAMS);
> > +	if (IS_ERR(dec_params))
> > +		return PTR_ERR(dec_params);
> > +
> > +	sps = mtk_vdec_h264_get_ctrl_ptr(inst->ctx,
> > V4L2_CID_STATELESS_H264_SPS);
> > +	if (IS_ERR(sps))
> > +		return PTR_ERR(sps);
> > +
> > +	pps = mtk_vdec_h264_get_ctrl_ptr(inst->ctx,
> > V4L2_CID_STATELESS_H264_PPS);
> > +	if (IS_ERR(pps))
> > +		return PTR_ERR(pps);
> > +
> > +	scaling_matrix =
> > +		mtk_vdec_h264_get_ctrl_ptr(inst->ctx,
> > V4L2_CID_STATELESS_H264_SCALING_MATRIX);
> > +	if (IS_ERR(scaling_matrix))
> > +		return PTR_ERR(scaling_matrix);
> > +
> > +	mtk_vdec_h264_update_dpb(dec_params, inst->dpb);
> > +
> > +	mtk_vdec_h264_copy_sps_params(&slice_param->sps, sps);
> > +	mtk_vdec_h264_copy_pps_params(&slice_param->pps, pps);
> > +	mtk_vdec_h264_copy_scaling_matrix(&slice_param->scaling_matrix, 
> > scaling_matrix);
> > +
> > +	mtk_vdec_h264_copy_decode_params(&slice_param->decode_params,
> > dec_params, inst->dpb);
> > +	mtk_vdec_h264_fill_dpb_info(inst->ctx, &slice_param-
> > >decode_params,
> > +				    slice_param->h264_dpb_info);
> > +
> > +	/* Build the reference lists */
> > +	v4l2_h264_init_reflist_builder(&reflist_builder, dec_params,
> > sps, inst->dpb);
> > +	v4l2_h264_build_p_ref_list(&reflist_builder, p0_reflist);
> > +
> > +	v4l2_h264_build_b_ref_lists(&reflist_builder, b0_reflist,
> > b1_reflist);
> > +	/* Adapt the built lists to the firmware's expectations */
> > +	mtk_vdec_h264_fixup_ref_list(p0_reflist,
> > reflist_builder.num_valid);
> > +	mtk_vdec_h264_fixup_ref_list(b0_reflist,
> > reflist_builder.num_valid);
> > +	mtk_vdec_h264_fixup_ref_list(b1_reflist,
> > reflist_builder.num_valid);
> > +	memcpy(&inst->vsi_ctx.h264_slice_params, slice_param,
> > +	       sizeof(inst->vsi_ctx.h264_slice_params));
> 
> This function looks very redundant across multiple variants, could
> you try and
> make a helper to reduce the duplication ?
> 
At first, I try to add one helper function for single core and lat
decode.

But these two hardware have big differences, need to add many condition
to separate. So just add new function for mt8186 single core
architecture.

Best Regards,
Yunfei Dong
> > +
> > +	return 0;
> > +}
> > +
> >  static void vdec_h264_slice_fill_decode_reflist(struct
> > vdec_h264_slice_inst *inst,
> >  						struct
> > vdec_h264_slice_lat_dec_param *slice_param,
> >  						struct
> > vdec_h264_slice_share_info *share_info)
> > @@ -596,6 +657,120 @@ static int vdec_h264_slice_lat_decode(void
> > *h_vdec, struct mtk_vcodec_mem *bs,
> >  	return err;
> >  }
> >  
> > +static int vdec_h264_slice_single_decode(void *h_vdec, struct
> > mtk_vcodec_mem *bs,
> > +					 struct vdec_fb *unused, bool
> > *res_chg)
> > +{
> > +	struct vdec_h264_slice_inst *inst = h_vdec;
> > +	struct vdec_vpu_inst *vpu = &inst->vpu;
> > +	struct mtk_video_dec_buf *src_buf_info, *dst_buf_info;
> > +	struct vdec_fb *fb;
> > +	unsigned char *buf;
> > +	unsigned int data[2], i;
> > +	u64 y_fb_dma, c_fb_dma;
> > +	struct mtk_vcodec_mem *mem;
> > +	int err, nal_start_idx;
> > +
> > +	/* bs NULL means flush decoder */
> > +	if (!bs)
> > +		return vpu_dec_reset(vpu);
> > +
> > +	fb = inst->ctx->dev->vdec_pdata->get_cap_buffer(inst->ctx);
> > +	src_buf_info = container_of(bs, struct mtk_video_dec_buf,
> > bs_buffer);
> > +	dst_buf_info = container_of(fb, struct mtk_video_dec_buf,
> > frame_buffer);
> > +
> > +	y_fb_dma = fb ? (u64)fb->base_y.dma_addr : 0;
> > +	c_fb_dma = fb ? (u64)fb->base_c.dma_addr : 0;
> > +	mtk_vcodec_debug(inst, "[h264-dec] [%d] y_dma=%llx c_dma=%llx",
> > +			 inst->ctx->decoded_frame_cnt, y_fb_dma,
> > c_fb_dma);
> > +
> > +	inst->vsi_ctx.dec.bs_buf_addr = (u64)bs->dma_addr;
> > +	inst->vsi_ctx.dec.bs_buf_size = bs->size;
> > +	inst->vsi_ctx.dec.y_fb_dma = y_fb_dma;
> > +	inst->vsi_ctx.dec.c_fb_dma = c_fb_dma;
> > +	inst->vsi_ctx.dec.vdec_fb_va = (u64)(uintptr_t)fb;
> > +
> > +	v4l2_m2m_buf_copy_metadata(&src_buf_info->m2m_buf.vb,
> > +				   &dst_buf_info->m2m_buf.vb, true);
> > +	err = get_vdec_sig_decode_parameters(inst);
> > +	if (err)
> > +		goto err_free_fb_out;
> > +
> > +	buf = (unsigned char *)bs->va;
> > +	nal_start_idx = mtk_vdec_h264_find_start_code(buf, bs->size);
> > +	if (nal_start_idx < 0) {
> > +		err = -EINVAL;
> > +		goto err_free_fb_out;
> > +	}
> > +	inst->vsi_ctx.dec.nal_info = buf[nal_start_idx];
> > +
> > +	*res_chg = inst->resolution_changed;
> > +	if (inst->resolution_changed) {
> > +		mtk_vcodec_debug(inst, "- resolution changed -");
> > +		if (inst->realloc_mv_buf) {
> > +			err = vdec_h264_slice_alloc_mv_buf(inst, &inst-
> > >ctx->picinfo);
> > +			inst->realloc_mv_buf = false;
> > +			if (err)
> > +				goto err_free_fb_out;
> > +		}
> > +		inst->resolution_changed = false;
> > +
> > +		for (i = 0; i < H264_MAX_MV_NUM; i++) {
> > +			mem = &inst->mv_buf[i];
> > +			inst->vsi_ctx.mv_buf_dma[i] = mem->dma_addr;
> > +		}
> > +	}
> > +
> > +	memcpy(inst->vpu.vsi, &inst->vsi_ctx, sizeof(inst->vsi_ctx));
> > +	err = vpu_dec_start(vpu, data, 2);
> > +	if (err)
> > +		goto err_free_fb_out;
> > +
> > +	/* wait decoder done interrupt */
> > +	err = mtk_vcodec_wait_for_done_ctx(inst->ctx,
> > MTK_INST_IRQ_RECEIVED,
> > +					   WAIT_INTR_TIMEOUT_MS,
> > MTK_VDEC_CORE);
> > +	if (err)
> > +		mtk_vcodec_err(inst, "decode timeout: pic_%d",
> > +			       inst->ctx->decoded_frame_cnt);
> > +
> > +	inst->vsi->dec.timeout = !!err;
> > +	err = vpu_dec_end(vpu);
> > +	if (err)
> > +		goto err_free_fb_out;
> > +
> > +	memcpy(&inst->vsi_ctx, inst->vpu.vsi, sizeof(inst->vsi_ctx));
> > +	mtk_vcodec_debug(inst, "pic[%d] crc: 0x%x 0x%x 0x%x 0x%x 0x%x
> > 0x%x 0x%x 0x%x",
> > +			 inst->ctx->decoded_frame_cnt,
> > +			 inst->vsi_ctx.dec.crc[0], inst-
> > >vsi_ctx.dec.crc[1],
> > +			 inst->vsi_ctx.dec.crc[2], inst-
> > >vsi_ctx.dec.crc[3],
> > +			 inst->vsi_ctx.dec.crc[4], inst-
> > >vsi_ctx.dec.crc[5],
> > +			 inst->vsi_ctx.dec.crc[6], inst-
> > >vsi_ctx.dec.crc[7]);
> > +
> > +	inst->ctx->decoded_frame_cnt++;
> > +	return 0;
> > +
> > +err_free_fb_out:
> > +	mtk_vcodec_err(inst, "dec frame number: %d err: %d",
> > +		       inst->ctx->decoded_frame_cnt, err);
> > +	return err;
> > +}
> > +
> > +static int vdec_h264_slice_decode(void *h_vdec, struct
> > mtk_vcodec_mem *bs,
> > +				  struct vdec_fb *unused, bool
> > *res_chg)
> > +{
> > +	struct vdec_h264_slice_inst *inst = h_vdec;
> > +	int ret;
> > +
> > +	if (!h_vdec)
> > +		return -EINVAL;
> > +
> > +	if (inst->ctx->dev->vdec_pdata->hw_arch ==
> > MTK_VDEC_PURE_SINGLE_CORE)
> > +		ret = vdec_h264_slice_single_decode(h_vdec, bs, unused,
> > res_chg);
> > +	else
> > +		ret = vdec_h264_slice_lat_decode(h_vdec, bs, unused,
> > res_chg);
> > +
> > +	return ret;
> > +}
> > +
> >  static int vdec_h264_slice_get_param(void *h_vdec, enum
> > vdec_get_param_type type,
> >  				     void *out)
> >  {
> > @@ -620,7 +795,7 @@ static int vdec_h264_slice_get_param(void
> > *h_vdec, enum vdec_get_param_type type
> >  
> >  const struct vdec_common_if vdec_h264_slice_multi_if = {
> >  	.init		= vdec_h264_slice_init,
> > -	.decode		= vdec_h264_slice_lat_decode,
> > +	.decode		= vdec_h264_slice_decode,
> >  	.get_param	= vdec_h264_slice_get_param,
> >  	.deinit		= vdec_h264_slice_deinit,
> >  };
> 
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ