[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1655298939-392-1-git-send-email-quic_krichai@quicinc.com>
Date: Wed, 15 Jun 2022 18:45:39 +0530
From: Krishna chaitanya chundru <quic_krichai@...cinc.com>
To: helgaas@...nel.org
Cc: linux-pci@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org, quic_vbadigan@...cinc.com,
quic_hemantk@...cinc.com, quic_nitegupt@...cinc.com,
quic_skananth@...cinc.com, quic_ramkri@...cinc.com,
manivannan.sadhasivam@...aro.org, swboyd@...omium.org,
Krishna chaitanya chundru <quic_krichai@...cinc.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Stanimir Varbanov <svarbanov@...sol.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Rob Herring <robh@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Bjorn Helgaas <bhelgaas@...gle.com>
Subject: [PATCH v2] PCI: qcom: Allow L1 and its sub states
Allow L1 and its sub-states in the qcom pcie driver.
By default this is disabled in the hardware. So enabling it explicitly.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@...cinc.com>
---
drivers/pci/controller/dwc/pcie-qcom.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 6ab9089..0d8efcc 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -41,6 +41,9 @@
#define L23_CLK_RMV_DIS BIT(2)
#define L1_CLK_RMV_DIS BIT(1)
+#define PCIE20_PARF_PM_CTRL 0x20
+#define REQ_NOT_ENTR_L1 BIT(5)
+
#define PCIE20_PARF_PHY_CTRL 0x40
#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK GENMASK(20, 16)
#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) ((x) << 16)
@@ -1267,6 +1270,11 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
val |= BIT(4);
writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
+ /* Enable L1 and L1ss */
+ val = readl(pcie->parf + PCIE20_PARF_PM_CTRL);
+ val &= ~REQ_NOT_ENTR_L1;
+ writel(val, pcie->parf + PCIE20_PARF_PM_CTRL);
+
if (IS_ENABLED(CONFIG_PCI_MSI)) {
val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
val |= BIT(31);
--
2.7.4
Powered by blists - more mailing lists